多巴酚丁胺的流动注射化学发光法测定

在盐酸介质中 ,高锰酸钾可氧化多巴酚丁胺产生化学发光 ,甲醛对该反应有较强的增敏作用 ,据此 ,建立了流动注射化学发光法测定多巴酚丁胺的方法 ;方法的线性范围为0.1～100mg·L -1,检出限为0.07mg·L -1 ,相对标准偏差为1.2 %(n=11,ρ=1.0mg·L -1) ;该法用于药物中多巴酚丁胺含量的测定 ,结果令人满意。     

电源最大输出功率的条件及公式的应用

当外电路的电阻等于电源内电阻时,电源输出功率最大,应用这个结论,可以省去许多计算步骤.但实际应用时还要注意一些问题,下面从几个方面加以讨论.1 电源实际输出功率与最大输出功率的区别 这是两个不同的概念,一些学生往往会用Pm=(?)/4r计算电源输出最大功率,其实,(?)/4r只是电源输出功率的极限,电源一般不在该状态下工作.     

Synthesis and luminescence properties of lanthanide(III) chelates with polyacid derivatives of thienyl-substituted terpyridine analogues

Two new polyacid derivative ligands of thienyl-substituted terpyridine analogues, N,N,N¹,N¹-[4′-(2?-thienyl)-2,2′:6′,2″-terpyridine-6,6″-diyl]bis(methylenenitrilo) tetrakis(acetic acid) (TTTA) and N,N,N¹,N¹-[2,6-bis(3′-aminomethyl-1′-pyrazolyl)-4-(2″-thienyl)pyridine] tetrakis(acetic acid) (BTTA), were synthesized, and the luminescence properties of their Eu³⁺ and Tb³⁺ chelates were investigated. The Eu³⁺chelates of the two ligands are strongly luminescent having luminescence quantum yields of 0.150 (TTTA-Eu³⁺) and 0.114 (BTTA-Eu³⁺), and lifetimes of 1.284 ms (TTTA-Eu³⁺) and 1.352 ms (BTTA-Eu³⁺), whereas their Tb³⁺ chelates are weakly luminescent. The TTTA-Eu³⁺ chelate was used for streptavidin (SA) labeling, and the labeled SA was used for time-resolved fluoroimmunoassay of insulin in human sera. The method gives the detection limits of 33 pg ml⁻¹.     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

源气体对沉积的a-C∶F∶H薄膜结构的影响

采用微波电子回旋共振等离子体化学气相沉积(MWPECRCVD)方法,使用不同的源气体(CHF3CH4,CHF3C2H2,CHF3C6H6)体系制备了aC∶F∶H薄膜.由于CH4,C2H2,C6H6气体在等离子体中的分解反应不同导致了薄膜的沉积速率和结构上的差异.红外吸收谱的结果表明,用C6H6CHF3作为源气体沉积的薄膜中几乎不含H,而用C2H2CHF3所沉积的薄膜中的含氟量最高,其相应的CF振动峰位向高频方向偏移.薄膜的真空退火结果表明,aC∶F∶H薄膜的热稳定性除了取决于薄膜的CC键浓度外,还与CC键 关键词： 氟化非晶碳膜 电子回旋共振化学气相沉积 红外吸收光谱     

Development and applications of an on-line thermal neutron prompt-gamma element analysis system

This paper introduces the principles, instrumentation, implementation, and industrial applications of an on-line thermal neutron prompt-gamma element analysis system (using a²⁵²Cf neutron source, Am–Be neutron source, or neutron generator). The energy resolution of the system at the H prompt-gamma full-energy photopeak (2.22325 MeV) is 3.6 keV. The concentration measurement error of Al₂O₃, FeO₃, CaO, and SiO₂ is ±0.3%, ±0.1%, ±0.4%, and ±0.4%, respectively. The system has been tested on-site at both the Shandong and the Zhengzhou Aluminium Works. Our preliminary on-site measurements confirm that the stability, reliability, measurement range, and accuracy of the system can meet the requirements of the aluminium production process. Facilitation of this measurement at aluminium plants is expected to reduce plant costs by over 3 million dollars annually through reduced energy consumption, more rapid qualification of pulps being mixed during the production process, and in reduced labor costs.Other participants of Shandong and Zhenghou Aluminium Works are: Wang Aili, Zengshen, Dei Jianguo and Lu Jinnan, Wang Deyu, Jin Hequan.     

YZr2OZr3:Er3+纳米晶anti-Stokes发光性质的研究

采用均相沉积法制备了不同Er³⁺离子浓度掺杂的Y₂O₃纳米晶, 应用XRD，SEM和PL光谱对该体系材料进行了表征.在Y₂O₃:Er³⁺纳米材料体系中, 观察和研究了Stokes及anti-Stokes PL谱强度与Er³⁺离子摩尔浓度变化的关系, 当Er³⁺离子浓度为2.0mol%时, anti-Stokes PL强度最强.粉末X 关键词： 氧化钇纳米晶 anti-Stokes PL 双光子吸收     

The growth of Pd thin films on a 6H-SiC(0 0 0 1) substrate

Pd thin films, grown on Si-rich 6H-SiC(0 0 0 1) substrates, were studied by atomic force microscopy, electron diffraction and high-resolution transmission electron microscopy. It is concluded that the growth is successful only when all the growth process takes place at room temperature. Under these conditions a very good epitaxial growth of Pd is achieved, despite the large misfit (about 8.6%) between Pd and the substrate and the existence of a semi-amorphous layer between the thin film and the substrate. A large number of twins appear in these films.