Topology evolution and gelation mechanism of agarose gel

Kinetics as well as the evolution of the agarose gel topology is discussed, and the agarose gelation mechanism is identified. Aqueous high melting (HM) agarose solution (0.5% w/v) is used as the model system. It is found that the gelation process can be clearly divided into three stages: induction stage, gelation stage, and pseudoequilibrium stage. The induction stage of the gelation mechanism is identified using an advanced rheological expansion system (ARES, Rheometric Scientific). When a quench rate as large as 30 deg C/min is applied, gelation seems to occur through a nucleation and growth mechanism with a well-defined induction time (time required for the formation of the critical nuclei which enable further growth). The relationship between the induction time and the driving force which is determined by the final setting temperature follows the 3D nucleation model. A schematic representation of the three stages of the gelation mechanism is given based on turbidity and rheological measurements. Aggregation of agarose chains is promoted in the polymer-rich phase and this effect is evident from the increasing mass/length ratio of the fiber bundles upon gelation. Continuously increasing pore size during gelation may be attributed to the coagulation of the local polymer-rich phase in order to achieve the global minimum of the free energy of the gelling system. The gel pore size determined using turbidity measurements has been verified by electrophoretic mobility measurements.     

C9‐Iridoids from Scrophularia buergeriana

Four new iridoids, buergerinins B–E ( 1 – 4 ), along with three known iridoids, were isolated from the roots of Scrophularia buergeriana. Their structures were identified on the basis of spectroscopic analysis.     

Study on synthesis of two-armed polymers containing a crown ether core and their self-assembly behaviors in selective solvents

A series of well-defined two-armed polymers containing a crown ether core, poly(stearyl methacrylate)-crown ether-poly(stearyl methacrylate) (PSMA-crown-PSMA), with different molecular weight were synthesized via atom transfer radical polymerization (ATRP). The resultant polymers were characterized by ¹H NMR and GPC. The self-assembly behaviors of this kind of polymer in selective solvents were studied by TEM, and it was found that polymers with different molecular weight can directly self-assemble into hollow spheres, solid spheres and a monolayer film with regular pores by varying molecular weight and water content. The possible molecular packing motels for their self-assembly behaviors were proposed.     

Comparative X-ray photoelectron spectroscopic study on the desulfurization of thiophene by Raney nickel and rapidly quenched skeletal nickel

The desulfurization of thiophene on Raney Ni and rapidly quenched skeletal Ni (RQ Ni) has been studied in ultrahigh vacuum (UHV) by X-ray photoelectron spectroscopy (XPS). The Raney Ni or RQ Ni can be approximated as a hydrogen-preadsorbed polycrystalline Ni-alumina composite. It is found that thiophene molecularly adsorbs on Raney Ni or RQ Ni at 103 K. At 173 K, thiophene on alumina is desorbed, while thiophene in direct contact with the metallic Ni in Raney Ni undergoes C-S bond scission, leading to carbonaceous species most probably in the metallocycle-like configuration and atomic sulfur. On RQ Ni, the temperature for thiophene dissociation is about 100 K higher than that on Raney Ni. The lower reactivity of RQ Ni toward thiophene is tentatively attributed to lattice expansion of Ni crystallites in RQ Ni due to rapid quenching. The existence of alumina and hydrogen may block the further cracking of the metallocycle-like species on Raney Ni and RQ Ni at higher temperatures, which has been the dominant reaction pathway on Ni single crystals. By 473 K, the C 1s peak has disappeared, leaving nickel sulfide on the surface.     

线粒体热化学研究──Ⅳ．鱼类肝脏线粒体代谢的微量热学研究

线粒体热化学研究──Ⅳ．鱼类肝脏线粒体代谢的微量热学研究谭安民，刘义，谢昌礼，屈松生，顾贫，邓凤姣（武汉大学化学系武汉４３００７２）（武汉大学生命科学院武汉）关键词鱼肝脏，线粒体，微量热学，热化学线粒体在能量代谢的过程中，除一部分能量用于合成ＡＴＰ外...     

三磷酸胞苷在Duolite A-30树脂上的交换过程研究

根据CTP在离子交换树脂上的吸附容量和分离因数的大小,确定Duolite A-30树脂适合CTP与CDP,CMP之间的分离.对CTP在Duolite A-30树脂上的吸附动力学和热力学研究表明,在283.15K~303.15K之间,CTP的质量浓度在7.5g/L以上时,Duolite A-30树脂对CTP的吸附主要受颗粒扩散的控制,其有效扩散系数为D=3.47×10-7cm2/s,溶液的质量浓度≤1.0g/L时,CTP与Duolite A-30树脂之间的交换速率主要受液膜控制,其液膜扩散系数为Kf =4.112×10-4/s.同时测定了不同条件下三磷酸胞苷溶液在Duolite A-30树脂固定床离子交换柱中的穿透曲线,研究了进口浓度、进口流速、原料液温度、原料液的pH值及柱高对穿透曲线的影响.用二阶动力学推动力模型描述固定床动态过程,考察了轴向返混对穿透曲线的影响,并从穿透曲线回归得到总传质系数,模型计算值与实验数据符合良好.     

A new piezoelectric response model for population growth of bacteria

A piezoelectric response model on the population growth of microorganism is proposed. This model is based on a novel population growth model, which has a more obvious ecological meaning and the fact that the series piezoelectric quartz crystal (SPQC) sensor responses to conductivity changes of the medium during the growth of the microorganism. From the response model four parameters can be obtained including the maximum specific growth rate mu(m), saturated population size N(m), and two constants C and K(1). The influence of the parameters on the response curve is discussed in which the influences of mu(m) and N(m) are more obvious. With the proposed model the quantitative determination of bacteria may be more accurate than the frequency detection time (FDT) method. Then the growth of Escherichia coliform (E. coli) monitored with a SPQC sensor is compared with the simulated growth curve obtained by the proposed model and a good agreement is obtained.     

Filamentous growth in activated sludge

Applied Biochemistry and Biotechnology - Bulking and foaming in activated sludge have been associated with filamentous overgrowth. FilamentousNocardia amarae and nonfilamentousPseudomonas...     

稀土丙烯酸盐与8－羟基喹啉三元固态配合物的合成与表征

稀土丙烯酸盐与８－羟基喹啉三元固态配合物的合成与表征李长正，王学智，唐宁，谭民裕（兰州大学化学系兰州７３００００）关键词：稀土，丙烯酸，８－羟基喹琳，三元配合物８－羟基喹琳因其具有优良的配位性能而被广泛应用于金属离子的分离和分析中［１］。文献中有关它...     

Study on the new fluorescence enhancement system of Tb-1,10-bis(2′-carboxylphenyl)-1,4,7,10-tetraoxadecane in silver chloride collosol and its analytical application

A new salicylic-based open-chain crown ether ligand, 1,10-bis(2′-carboxylphenyl)-1,4,7,10-tetraoxadecane (BCPTD) was synthesized. Solutions of its complex with Tb³⁺ can emit the intrinsic fluorescence of Tb³⁺. The fluorescence intensity of the complex in KCl solution was enhanced by the addition of silver(I), leading to a new fluorescence enhancement phenomenon. The spectrofluorimetric determination of traces of silver(I) based on the above phenomenon was carried out. The excitation and emission wavelengths are 298 and 545 nm, respectively. Under optimal conditions, the differential value of fluorescence intensity in the absence and presence of Ag⁺ was proportional to the concentration of silver(I) in the range 0.5-20 μg ml⁻¹. The method was applied to the determination of silver(I) in a standard ore sample. The analytical performance is investigated in detail by using common aromatic carboxylic acids or synthetic analogues of BCPTD as ligands to replace BCPTD. It was found that Tb-aromatic acid complexes did not result in fluorescence enhancement of Tb³⁺ in AgCl collosol. The phenomenon was only observed in Tb(III) with BCPTD or its open-chain crown ether analogues solutions.In addition, the enhancement of the fluorescence intensity of terbium(III) in these complexes depends on the extent of formation of the AgCl collosol.