Rheological study on rapid recovery of hydrogel based on oligomeric electrolyte

The hydrogel consisting of an oligomeric electrolyte, poly[pyridinium-1,4-diyl-iminocarbonyl-1,4-phenylenemethylene chloride] ( 1-Cl) underwent self-healing at temperatures lower than its gelation temperature after destruction of the gel network in a shear flow. The self-healing mechanism was investigated by rheological measurements on three different kinds of gels including a low-molecular weight organogelator and a polymeric hydrogelator. Although all of the three gels exhibited thermo-reversible hysteresis loops in the shear moduli, only 1-Cl hydrogel recovered its mechanical properties after vigorous agitation. It is conjectured that the self-healing is due to formation of network structure via a chlorine ion mediated hydrogen bond for which the activation energy is on the order of 10 kJ/mol.     

Letter: correlation between phosphorylation ratios by matrix-assisted laser desorption/ionization time-of-flight mass spectrometric analysis and enzyme kinetics

To identify the correlation between the phosphorylation ratios by matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-ToF MS) analysis and enzyme kinetics (K(m), V(max), and V(max)/K(m)) is important to understand whether MALDI-TOF MS can be applied for monitoring the properties of peptides that are substrates of protein kinases. The correlation between phosphorylation ratios and enzyme kinetics was examined using peptides for protein kinase C (PKC) and for 60 kDa phosphoprotein, encoded by the cellular sarcoma gene (c-Src). Phosphorylation ratios, analyzed by MALDI-ToF MS, showed higher correlation coefficient (r = > +0.7) for V(max)/K(m) compared with that (r = < -/+0.6) for K(m) or V(max). For ion modes, a higher correlation coefficient between phosphorylation ratios and V(max)/K(m) was identified in the positive mode (r = > +0.7) compared to that in the negative mode (r = < +0.5). These results suggest that MALDI-ToF MS is a useful tool to evaluate V(max)/K(m) of peptides for protein kinases.     

On-target derivatization of keratan sulfate oligosaccharides with pyrenebutyric acid hydrazide for MALDI-TOF/TOF-MS

In the present work, a rapid and novel method of on-target plate derivatization of keratan sulfate (KS) oligosaccharides for subsequent analysis by matrix-assisted laser desorption and ionization (MALDI) mass spectrometry is described. MALDI-(time-of-flight)-TOF spectra of labeled KS oligosaccharides revealed that significantly improved ionization can be accomplished through derivatization with pyrenebutyric acid hydrazide (PBH), and the most abundant peak in each spectrum corresponds to the singly charged molecular ion [M - H]- or [M + (n - 1)Na - nH]-, where n = the number of sulfates (n = 1, 2, 3...). The high-energy collision-induced dissociation (heCID) spectra of labeled KS oligosaccharides displayed fragments of compounds similar to those observed with laser-induced dissociation (LID) analysis, suggesting that both heCID and LID fragmentations can be used to analyze KS oligosaccharides. Moreover, fragmentation analysis of all labeled KS oligosaccharides was performed by MALDI-TOF/TOF-MS. With LID mode, sodium adducts showed fragmentation of glycosidic linkages with mainly Y/B/C ions, as well as various cross-ring cleavages providing exact information for the positions of sulfate groups along the KS oligosaccharide chains. This one-step on-target derivatization method makes MALDI-TOF/TOF-MS identification of KS fast, simple and highly throughput for trace amounts of biological samples.     

Control of wettability of molecularly thin liquid films by nanostructures

The patterning of liquid thin films on solid surfaces is very important in various fields of science and engineering related to surfaces and interfaces. A method of nanometer-scale patterning of a molecularly thin liquid film on a silicon substrate using the lyophobicity of the oxide nanostructures has recently been reported (Fukuzawa, K.; Deguchi, T.; Kawamura, J.; Mitsuya, Y.; Muramatsu, T.; Zhang, H. Appl. Phys. Lett. 2005, 87, 203108). However, the origin of the lyophobicity of the nanostructure with a height of around 1 nm, which was fabricated by probe oxidation, has not yet been clarified. In the present study, the change in thickness of the liquid film on mesa-shaped nanostructures and the wettability for the various combinations of the thickness of the liquid films and the height of ridge-shaped nanostructures were investigated. These revealed that lyophobicity is caused by a lowering of the intermolecular interaction between the liquid and silicon surfaces by the nanostructure and enables the patterning of a liquid film along it. The tendency of the wettability for a given liquid film and nanostructure size can be predicted by estimating the contributions of the intermolecular interaction and capillary pressure. In this method, the height of the nanostructure can control the wettability. These results can provide a novel method of nanoscale patterning of liquid thin films, which will be very useful in creating new functional surfaces.     

Design of polymeric carriers for cancer-specific gene targeting: utilization of abnormal protein kinase Calpha activation in cancer cells

We succeeded in cancer cell specific gene expression by using a polyplex responsive to protein kinase Calpha, which is activated in various types of cancer cells.     

Stable incorporation of gold nanorods into N-isopropylacrylamide hydrogels and their rapid shrinkage induced by near-infrared laser irradiation

In this study, we prepared gold nanorod (NR)-embedded N-isopropylacrylamide (NIPAM) hydrogels and studied their volume phase transition behavior induced by near-infrared (near-IR) laser irradiation utilizing the photothermal conversion characteristics of the NRs. When poly(ethylene glycol)-modified NRs were used for the preparation of composite gels, the NRs showed marked dispersion stability in the gel. Near-IR laser irradiation of the gel (cylindrical shape, diameter = 140 microm) under the following conditions, NR concentrations in the gel > or =100 microM and laser irradiation power > or =490 mW, resulted in shrinkage of the gel in the following manner: (1) waist formation around the irradiation spot and (2) growth of the waist along the axial directions of the gel. The gel shrinking induced by near-IR irradiation occurred much more rapidly than that afforded by a temperature jump, because the former was not accompanied by the skin layer formation, which disturbs the rapid shrinking of the gels. When a composite gel containing the model drug (rhodamine-labeled dextran) was irradiated with a near-IR laser, the rapid release of the drug was observed. Taking advantage of the high spatial resolution of the irradiation point, we further achieved the irradiation-point-specific release of the drug from one such gel.     

Use of stable carbon isotope ratios to determine the source of cypermethrin in so-called natural plant extract formulations used for organic farming

Some natural plant extract formulations (NPEFs, also referred to as essential oils) used in organic farming have been shown to contain synthetic pesticides. We obtained samples of four NPEFs (Muso, Hekiro, Kensogen-Ten, and Nurse Green) that were contaminated with the synthetic pyrethroid cypermethrin, and we used gas chromatography coupled with combustion, cryofocusing, and isotope ratio mass spectrometry to determine the stable carbon isotope ratios (δ¹³C) for the cypermethrin in the four NPEF samples, as well as in ten cypermethrin reagents and two commercial pesticide formulations (Agrothrin emulsion and Agrothrin water-dispersible powder). Our goal was to identify the source of the cypermethrin in the NPEFs. Cryofocusing markedly sharpened the cypermethrin peak and thus improved the accuracy and precision of the determined δ¹³C values. The δ¹³C values (±?SD) of the 16 cypermethrin samples ranged from ?28.3?±?0.2 to ?24.5?±?0.2?‰. Surprisingly, the four NPEFs showed similar δ¹³C values (?26.8 to ?27.3?‰), suggesting that the cypermethrin in all the samples came from the same source (either the same chemical reaction or the same primary material). This possibility was supported by previously published results. In addition, the δ¹³C values of the two commercial pesticides were similar to the values for the NPEFs, suggesting that the commercial pesticides had been diluted and sold as NPEFs.     

Influence of Cu electroplating solutions on boron carbon nitride (BCN) film

Cu electroplating is required for the fabrication of Cu/low-k interconnections. The permeation of a plating solution into low-k films during Cu electroplating is a serious challenge for 45-nm nodes and more complex devices. We investigated the influence of Cu electroplating solutions on boron carbon nitride (BCN) as a low-k film. After dipping it into a Cu electroplating solution that contained additives, the BCN film's hydrophilic surface changed to a hydrophobic surface, and the incorporation of water into the BCN film was suppressed by surfactant adsorption. Sulfuric residue was detected on the BCN sample by thermal desorption spectroscopy after treatment in the Cu electroplating solution with additives; however, it was found through electrical measurements that this solution did not affect the leakage current or the dielectric constant of the BCN film. We successfully fabricated an electroplating Cu layer on a BCN film with good adhesion, and we believe that this BCN film is a sufficiently useful material for Cu/BCN integration in LSI.     

Separation of isomeric 2-aminopyridine derivatized N-glycans and N-glycopeptides of human serum immunoglobulin G by using a zwitterionic type of hydrophilic-interaction chromatography

Isomeric oligosaccharides and isomeric glycopeptides are sometimes difficult to separate on normal-phase (NP) and reversed-phase (RP) columns. A zwitterionic type of hydrophilic-interaction chromatography column with sulfobetaine groups (called ZIC-HILIC column) was first applied to the separation of 2-aminopyridine derivatized (PA) N-glycans and tryptic peptides of human serum immunoglobulin G (IgG). It is shown that the ZIC-HILIC column has high capability for structural recognition of isomeric N-glycans as well as high selectivity for glycopeptides. The former feature (i.e., structural recognition) was proven by sufficient separation of neutral PA N-glycan isomers, which are usually difficult to separate on NP and RP columns. In addition, it is noteworthy that IgG glycopeptides consisting of isomeric N-glycans and the same peptide sequences can be sufficiently separated on a ZIC-HILIC column. The latter feature (i.e., selectivity) was also demonstrated by easily separating two peptide groups with/without N-glycans. Thus, we note that the ZIC-HILIC column is highly promising for a simple analysis of N-glycans and N-glycopeptide samples.     

A reduction-triggered delivery by a liposomal carrier possessing membrane-permeable ligands and a detachable coating

To control the cellular uptake of drugs and genes, we synthesized a liposomal carrier possessing membrane-permeable ligands and a detachable poly(ethylene glycol) (PEG) coating. For the detachable coating, a lipid having a thiolytic cleavable spacer (PEG-S-S-DOPE) was synthesized by the reaction of dioleoylphosphatidylethanolamine (DOPE) with a PEG chain via a disulfide linkage. The liposomes were prepared from a mixture of dipalmitoylphosphatidylcholine (DPPC), DOPE, PEG-S-S-DOPE, and cholesteryl hemisuccinate (CHEMS). The octamer (R8 peptide) of arginine was chosen as the membrane-permeable ligand and covalently immobilized onto the CHEMS portion of the liposome surface (PEG-S-S-R8-liposome). The disulfide bond of the PEG chain was cleaved to display the R8 peptides on the liposome surface by adding a reducing agent such as L-cysteine, and thereby internalization of the liposomes was significantly facilitated. When L-cysteine was added to the mixture of cells and the liposome that incorporated plasmids encoding the enhanced green fluorescence protein (pEGFP), the expression of EGFP was low but could be observed in almost 100% of the cells.