Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Accurate and sensitive high-performance liquid chromatographic method for geometrical and structural photoisomers of bilirubin IX alpha using the relative molar absorptivity values.

It has been reported that considerable differences exist between the relative molar absorptivity values of the geometrical and structural photoisomers of bilirubin. We have devised an accurate HPLC method for photoisomer quantification based on the following principle: the sum of both the integrated peak areas corrected by each factor for each photoisomer, and the integrated peak area of unchanged (ZZ)-bilirubin [(ZZ)-B] after an anaerobic photoirradiation, should be constant and equal to the integrated peak area of initial (ZZ)-bilirubin [(ZZ)-Bi] before photoirradiation. On this basis, the following equation can be used to determine each factor. [equation: see text] alpha, beta, gamma and delta represent the factors used to correct the integrated peak areas of individual bilirubin photoisomers, and they are arranged in the order of the formula. It was demonstrated that the relative 455 nm molar absorptivity values for (ZZ)-bilirubin and all its geometrical and structural photoisomers, i.e., (ZZ)-bilirubin, (ZE)-bilirubin (EZ)-bilirubin, (EZ)-cyclobilirubin (= lumirubin) and (EE)-cyclobilirubin in the HPLC eluent, are, respectively, 1.0, 0.81 (= alpha), 0.54 (= beta), 0.47 (= gamma) and 0.39 (= delta).     

Disk-type Nd/Cr:YAG ceramic lasers pumped by arc-metal-halide-lamp

We observed the lasing of highly sensitized Nd/Cr:YAG ceramic disks that use artificial solar radiation pumping. The disk material can be used for high power multi-stage amplifiers pumped by lamplight or sunlight because of its scalability and ability to handle high power densities. A maximum output power of 86 mW was experimentally obtained, and this value correlated well with the calculated results. A small signal gain of 1.9 was obtained, and the estimated stored energy was 0.6 J/cm³, which is three or four times higher than that from a Nd:YAG medium.     

Reaction Intermediates on TiO2(110) Identified by Time-Lapse Scanning Tunneling Microscopy

The present account describes first time examples of scanning tunneling microscope (STM) visualization of reaction intermediates on a metal oxide surface. The topographic response of reactant-adsorbed TiO₂(110) surfaces to a temperature increment or to a pressure increment was monitored as a sequence of STM images. Acetates thermally decomposing to ketene were resolved in a temperature-jump STM observation. The kinetics of the acetate consumption was determined on the number of acetates resolved in the microscope images and agreed with the macroscopic rate law of ketene production. A pressure-jump study revealed how a chemisorbed carboxylate (RCOO^-) is exchanged by another carboxylate (R'COO^-) supplied from the ambient vapor phase. An impinging R'COOH was immobilized on the top of a RCOO^- and then squeezed itself into the monolayer of the RCOO^-. One of the carboxylates in the squeezed state returned to the vapor phase via the immobilized state.     

Coronenetetraimide‐Centered Cruciform Pentamers Containing Multiporphyrin Units: Synthesis and Sequential Photoinduced Energy‐ and Electron‐Transfer Dynamics

A series of coronenetetraimide (CorTIm)‐centered cruciform pentamers containing multiporphyrin units, in which four porphyrin units are covalently linked to a CorTIm core through benzyl linkages, were designed and synthesized to investigate their structural, spectroscopic, and electrochemical properties as well as photoinduced electron‐ and energy‐transfer dynamics. These systems afforded the first synthetic case of coroneneimide derivatives covalently linked with dye molecules. The steady‐state absorption and electrochemical results indicate that a CorTIm and four porphyrin units were successfully characterized by the corresponding reference monomers. In contrast, the steady‐state fluorescence measurements demonstrated that strong fluorescence quenching relative to the corresponding monomer units was observed in these pentamers. Nanosecond laser flash photolysis measurements revealed the occurrence of intermolecular electron transfer from triplet excited state of zinc porphyrins to CorTIm. Femtosecond laser‐induced transient absorption measurements for excitation of the CorTIm unit clearly demonstrate the sequential photoinduced energy and electron transfer between CorTIm and porphyrins, that is, occurrence of the initial energy transfer from CorTIm (energy donor) to porphyrins (energy acceptor) and subsequent electron transfer from porphyrins (electron donor) to CorTIm (electron acceptor) in these pentamers, whereas only the electron‐transfer process from porphyrins to CorTIm was observed when we mainly excite porphyrin units. Finally, construction of high‐order supramolecular patterning of these pentamers was performed by utilizing self‐assembly and physical dewetting during the evaporation of solvent.     

Synthesis of redox-active, intramolecular charge-transfer chromophores by the [2+2] cycloaddition of ethynylated 2H-cyclohepta[b]furan-2-ones with tetracyanoethylene

Ethynylated 2H-cyclohepta[b]furan-2-ones 5-15 have been prepared by Pd-catalyzed alkynylation of 3-iodo-5-isopropyl-2H-cyclohepta[b]furan-2-one (2) with the corresponding ethynylarenes or the reaction of 2-iodothiophene with 3-ethynyl-5-isopropyl-2H-cyclohepta[b]furan-2-one (4) under Sonogashira-Hagihara conditions. Compounds 5-15 reacted with tetracyanoethylene in a formal [2+2] cycloaddition reaction, followed by ring opening of the initially formed [2+2] cycloadducts, cyclobutenes, to afford the corresponding 1,1,4,4-tetracyanobutadienyl (TCBD) chromophores 16-26 in excellent yields. The intramolecular charge-transfer interactions between the 2H-cyclohepta[b]furan-2-one ring and TCBD acceptor moiety were investigated by UV/Vis spectroscopy and theoretical calculations. The redox behavior of the novel TCBD derivatives 16-26 was examined by cyclic voltammetry and differential pulse voltammetry, which revealed multistep electrochemical reduction properties, depending on the number of TCBD units in the molecule. Moreover, a significant color change was observed by UV/Vis spectroscopy under electrochemical reduction conditions.     

Confinement in carbon nanospace-induced production of KI nanocrystals of high-pressure phase

An outstanding compression function for materials preparation exhibited by nanospaces of single-walled carbon nanohorns (SWCNHs) was studied using the B1-to-B2 solid phase transition of KI crystals at 1.9 GPa. High-resolution transmission electron microscopy and synchrotron X-ray diffraction examinations provided evidence that KI nanocrystals doped in the nanotube spaces of SWCNHs at pressures below 0.1 MPa had the super-high-pressure B2 phase structure, which is induced at pressures above 1.9 GPa in bulk KI crystals. This finding of the supercompression function of the carbon nanotubular spaces can lead to the development of a new compression-free route to precious materials whose syntheses require the application of high pressure.     

Chiral Sc-catalyzed asymmetric Michael reactions of thiols with enones in water

Asymmetric Michael reactions of thiols with enones were catalyzed by a Sc(OTf)(3)-chiral bipyridine complex at room temperature in water without using any organic solvents, to afford the desired sulfides in high yields with high enantioselectivities.     

1,5]-H shift of aldehyde hydrogen in dienal compounds to produce ketenes

In 3-ethoxycarbonyl-2,4-dienal compounds, a thermal [1,5]-H shift of aldehyde hydrogen easily proceeded to produce the corresponding vinyl ketenes due to the remarkable substituent effect caused by the C3 ester group. The produced ketenes were captured by an alcohol and olefins to afford the corresponding esters and four-membered ring compounds, respectively.     

Compression behaviors of binary skutterudite CoP3 in noble gases up to 40 GPa at room temperature

The binary skutterudite CoP(3) has a large void at the body-centered site of each cubic unit cell and is, therefore, called a nonfilled skutterudite. We investigated its room-temperature compression behavior up to 40.4 GPa in helium and argon using a diamond-anvil cell. High-pressure in situ X-ray diffraction and Raman scattering measurements found no phase transition and a stable cubic structure up to the maximum pressure in both media. A fitting of the present pressure-volume data to the third-order Birch-Murnaghan equation of state yields a zero-pressure bulk modulus K(0) of 147(3) GPa [pressure derivative K(0)' of 4.4(2)] and 171(5) GPa [where K(0)' = 4.2(4)] in helium and argon, respectively. The Gru?neisen parameter was determined to be 1.4 from the Raman scattering measurements. Thus, CoP(3) is stiffer than other binary skutterudites and could therefore be used as a host cage to accommodate large atoms under high pressure without structural collapse.