High-Pressure Synthesis of Fully Occupied Tetragonal and Cubic Tungsten Bronze Oxides

A high-pressure reaction yielded the fully occupied tetragonal tungsten bronze K₃W₅O₁₅ (K_0.6WO₃). The terminal phase shows an unusual transport property featuring slightly negative temperature-dependence in resistivity (dρ/dT<0) and a large Wilson ratio of R_W=3.2. Such anomalous metallic behavior possibly arises from the low-dimensional electronic structure with a van Hove singularity at the Fermi level and/or from enhanced magnetic fluctuations by geometrical frustration of the tungsten sublattice. The asymmetric nature of the tetragonal tungsten bronze K_xWO₃-K_0.6−yBa_yWO₃ phase diagram implies that superconductivity for x≤0.45 originates from the lattice instability because of potassium deficiency. A cubic perovskite KWO₃ phase was also identified as a line phase—in marked contrast to Na_xWO₃ and Li_xWO₃ with varying quantities of x (<1). This study presents a versatile method by which the solubility limit of tungsten bronze oxides can be extended.     

Comparative Study of the Determination of Parabens in Shampoos by Liquid Chromatography with Amperometric and Coulometric Detection

The simultaneous determination of four para‐hydroxybenzoic acid esters (parabens) in shampoos was studied by liquid chromatography (LC) with amperometric (LC‐AD) and coulometric (LC‐CD) detection. The parabens were separated on an ODS C18 reversed column by isocratic elution with a mobile phase based on methanol‐0.1 M acetic acid (60 : 40%, v/v) with 0.02 M NaClO₄ at a flow rate of 0.8 mL min^?1. The limit of detection (S/N>3) for the analytes was in the 15–25 pg (injected mass) range at an applied potential of 1.20 V vs. Ag/AgCl using the LC‐AD and in the 2–3 pg range at a potential of 0.790 V vs. Pd using the LC‐CD. The peak ratio of the internal standard peak (IS: 4‐hydroxybenzoic acid sec‐butyl ester) versus the analyte peak was found to be related to the amount injected from 0.1 ng to 100ng (r=0.996–0.999) with the LC‐AD and from 0.050 ng to 100 ng range (r=0.999–1.000) with the LC‐CD. The relative standard deviation (RSD, n=10) was comprised between 1.8 to 3.5% by LC‐AD ( 5 ng injected) and between 2.0 to 2.4% by LC‐CD (0.5 ng injected). The determination of four most used parabens in ten different shampoos was successfully realized.     

Degradation of hydroxymaleimide in 2-propanol by irradiation of energetic heavy ions (II)—N2-saturated system

Hydroxymaleimide was irradiated in N₂-saturated 2-propanol solutions by high-energy heavy ions over a wide range of LET values. The differential G-values of the degradation of hydroxymaleimide by irradiation with the heavier ions were lower than those of the lighter ions for the same LET value. An opposite result obtained in the air-saturated system. The degradation efficiency was 1.5 times higher, when the dose rate was 1/10 times lower. When irradiated at an LET value lower than 8 eV/nm, the G-values converged to a value less than that obtained by γ-irradiation.     

Peierls mechanism of the metal-insulator transition in ferromagnetic hollandite K2Cr8O16

Synchrotron x-ray diffraction experiment shows that the metal-insulator transition occurring in a ferromagnetic state of a hollandite K(2)Cr(8)O(16) is accompanied by a structural distortion from the tetragonal I4/m to monoclinic P112(1)/a phase with a √2×√2×1 supercell. Detailed electronic structure calculations demonstrate that the metal-insulator transition is caused by a Peierls instability in the quasi-one-dimensional column structure made of four coupled Cr-O chains running in the c direction, leading to the formation of tetramers of Cr ions below the transition temperature. This provides a rare example of the Peierls transition of fully spin-polarized electron systems.     

Enhanced JC in air-processed GdBa2Cu3O7−δ superconductor bulk grown by the additions of nano-particles

Single domain superconductor GdBa₂Cu₃O_7?δ bulks with variable additions of (ZnO + ZrO₂ + SnO₂) nano-particles was prepared in air by using top seed melt-textured growth process. The effect of nano-particle additions on superconductivity properties has been investigated. An enhancement of the critical current J_C in low and intermediate field at 77 K and trapped field was discovered by the additions of the nano-particles. At the same time, the superconductor transition temperature, T_C, slightly decreases from 93.5 K to 91.5 K. The experimental results show that the accumulation of the nano-particle inclusions may improve J_C of the specimens.     

Investigation of void formation beneath thin AlN layers by decomposition of sapphire substrates for self-separation of thick AlN layers grown by HVPE

Void formation at the interface between thick AlN layers and (0 0 0 1) sapphire substrates was investigated to form a predefined separation point of the thick AlN layers for the preparation of freestanding AlN substrates by hydride vapor phase epitaxy (HVPE). By heating 50–200 nm thick intermediate AlN layers above 1400 °C in a gas flow containing H₂ and NH₃, voids were formed beneath the AlN layers by the decomposition reaction of sapphire with hydrogen diffusing to the interface. The volume of the sapphire decomposed at the interface increased as the temperature and time of the heat treatment was increased and as the thickness of the AlN layer decreased. Thick AlN layers subsequently grown at 1450 °C after the formation of voids beneath the intermediate AlN layer with a thickness of 100 nm or above self-separated from the sapphire substrates during post-growth cooling with the aid of voids. The 79 μm thick freestanding AlN substrate obtained using a 200 nm thick intermediate AlN layer had a flat surface with no pits, high optical transparency at wavelengths above 208.1 nm, and a dislocation density of 1.5×10⁸ cm⁻².     

Enantioface-selective palladium-catalyzed silaboration of allenes via double asymmetric induction

Enantioenriched beta-borylallylsilanes were synthesized by palladium-catalyzed enantioface-selective addition of the silicon-boron bond to terminal allenes using a palladium catalyst possessing a chiral monodentate phosphine ligand. Use of a silylborane bearing a chiral auxiliary on the boron atom was beneficial to gain enantioface selectivities as high as 96% de.     

pH-responsive aqueous foams stabilized by hairy latex particles

Polystyrene (PS) latex particles carrying pH-responsive poly[2-(diethylamino)ethyl methacrylate] (PDEA) hair (PDEA-PS particles) were synthesized by dispersion polymerization and characterized in terms of diameter, diameter distribution, morphology, chemical composition, surface chemistry, and pH-response using scanning electron microscopy (SEM), elemental microanalysis, (1)H nuclear magnetic resonance spectroscopy, the laser diffraction method, and zeta potential measurements. The hairy particles can act as pH-responsive stabilizers of aqueous foams by adsorption at the air-water surface. Above pH 8.0, where particles have nonprotonated PDEA hair, which is relatively hydrophobic, particle-stabilized foams are stable for at least 1 month. Optical microscopy and SEM confirmed that flocculated PDEA-PS latex particles were adsorbed at the air-water interface and stabilized the aqueous foams. At pH 6.1 and 7.1, relatively stable foams can be prepared that remain stable for at least 24 h. SEM studies indicated that the PDEA-PS particles were adsorbed at the air-water interface as a monolayer at pH 6.1. At pH 5.1 and 3.1, where the particles have cationic water-soluble PDEA hairs with hydrophilic character, no foam was formed. Rapid defoamation can be induced by lowering the solution pH; the addition of acid caused the in situ protonation of 2-(diethylamino)ethyl methacrylate residues, which impart water-soluble hydrophilic character to the PDEA hair, and the PDEA-PS particles desorbed from the air-water interface. The foaming and defoaming cycles could be repeated at least five times.     

pH-responsive aqueous foams stabilized by ionizable latex particles

We have designed a type of colloidal particle whose surface characteristics are sensitive to the pH of the aqueous phase in which they are dispersed. Particles of polystyrene latex stabilized by poly(acrylic acid) can act as stabilizers of aqueous foams by adsorbing at the air-water surface. Foams can be prepared and stabilized only at pH values below the isoelectric point where particles are either uncharged and flocculated or acquire a positive charge. At high pH where particles are anionic, no foam forms. This influence of pH on foamability and stability applies to both pH-dependent and pH-responsive systems.     

Three bits eight states photochromic recording and nondestructive readout by using IR light

A photochromic polymer film containing three different diarylethene derivatives, that is, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2), and 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (3) was prepared. Upon UV irradiation, the three derivatives changed to their closed-ring isomers having different colors, yellow, red, and blue. They showed different spectra not only in UV/Vis region but also in the IR spectral region. Upon irradiation with visible light of appropriate wavelengths, each closed-ring isomer was selectively bleached, and three bits eight states recording was performed. The eight states could be read out nondestructively by using IR light of appropriate wavenumbers.