Solvent Effects on the Absorption Spectrum of the Product and the Equilibrium Constant for the Proton Transfer Reaction from 1-Phenacylquinolinium Bromide to Amines

The equilibrium constants, K ₂, have been determined for the proton-transfer reactions of 1-phenacylquinolinium ion, PHQ⁺, with several amines {triethylamine (TEA), N,N,N′,N′-tetramethylethylenediamine (ED), N,N,N′, N′-tetramethylpropanediamine (PD), N,N,N′,N′-tetramethylbutanediamine (BD), and 1,8-bis(dimethylamino-naphthalene (DMAN)} in acetonitrile (AN), AN-tetrahydrofuran (THF) and AN-ethanol (EtOH) mixtures. The reaction was followed spectrophotometrically using a stopped-flow technique. The K ₂ value decreased for DMAN and increased for TEA with increasing vol-% of THF in AN-THF mixtures. The changes in the K ₂ value for ED, PD and BD changed in the order: ED, PD and BD from a pattern similar to TEA to a pattern similar to DMAN. The change in the K ₂ value for DMAN with increasing vol-% of THF in AN-THF mixtures was explained by the effect of polarity on the stability of P⁻Q⁺ (the deprotonated product of PHQ⁺). The effect of THF on the K ₂ value is consistent with that of the peak wavelength of the absorption spectrum of P⁻Q⁺. The change in the K ₂ value for TEA, ED, PD and BD depended on the structures of the protonated bases, one of the products for this reaction. The effect of EtOH on the K ₂ value for DMAN was examined in ternary EtOH-THF-AN mixtures that contain different amounts of EtOH and whose relative permittivities were adjusted to that of EtOH. The K ₂ value increased with increasing vol-% of EtOH because of the stabilization of P⁻Q⁺ upon the formation of the hydrogen-bonded complex with EtOH. The absorption spectrum of P⁻Q⁺ demonstrated a blue shift as the vol-% of EtOH increased.     

Use of thiosulfonate for the protection of thiol groups in peptide ligation by the thioester method

Use of thiosulfonate for protecting thiol (-SH) groups in peptide ligation by the thioester method was examined. Thiosulfonate was introduced and was stable in the presence of silver ion, 4-dihydro-3-hydroxy-4-oxo-1,2,3-benzotriazine, and diisopropylethylamine. Based on these results, a strategy for using the thioester method and the native chemical ligation method in the synthesis of a single polypeptide is described.     

Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with 1,3‐dicarbonyl compounds: The synthesis of polymers containing hydroxy and carbonyl groups

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with 1,3‐dicarbonyl compounds [methyl acetoacetate ( 4 ), dimethyl malonate ( 6 ), and Meldrum's acid ( 8 )] was investigated under various conditions. The polyaddition of 1 with 4 was carried out in tetrahydrofuran with phosphine ligands such as PPh₃ and 1,2‐bis(diphenylphosphino)ethane (dppe). Polymers having hydroxy, ketone, and ester groups in the side groups ( 5 ) were obtained in good yields despite the kinds of ligands employed. The number‐average molecular weight value of 5b was higher than that of 5a . The polyaddition of 1b and 6 was affected by the kinds of ligands employed. The corresponding polymer 7b was not obtained when PPh₃ and 1,2‐bis(diphenylphosphino)ferrocene were used. The polyaddition was carried out with dppe as the ligand and gave polymer 7b in a good yield. The molecular weight of the polymer obtained from 1b and 8 was much higher than those of polymers 5b and 7b . The polyaddition with Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) produced polymer 9b in a 92% yield (number‐average molecular weight = 45,600). The stereochemistries of all the obtained polymers were confirmed as an E configuration by the coupling constant of the vinyl proton. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2487–2494, 2002     

Radical ring-opening polymerization behavior of vinylcyclopropanes derived from dienes and chloroform

1,1-Dichloro-2-vinylcyclopropane ( Ia ), 1,1-dichloro-2-methyl-2-vinylcyclopropane ( Ib ), 1,1,2-trichloro-2-vinylcyclopropane ( Ic ) were prepared from the corresponding dienes and chloroform in the presence of a phase transfer catalyst (PTC), R₄N⁺Cl^?. Monomers Ia – Ic underwent a clean 1,5-type radical ring-opening process to afford the corresponding polymers in good yield. Further, the relative rate of polymerization and reaction of ( I ) with thiophenol were studied.     

A multi-mode-driven molecular shuttle: photochemically and thermally reactive azobenzene rotaxanes

The shuttling process of alpha-CyD in three rotaxanes (1-3) containing alpha-cyclodextrin (alpha-CyD) as a ring, azobenzene as a photoactive group, viologen as an energy barrier for slipping of the ring, and 2,4-dinitrobenzene as a stopper was investigated. The trans-cis photoisomerization of 1 by UV light irradiation occurred in both DMSO and water due to the movement of alpha-CyD toward the ethylene group, while the photoisomerization of 2 occurred in DMSO, but not in water. No photoisomerization was observed for 3 in both water and DMSO. The activation parameters of 1 and 1-ref in DMSO are subject to a compensation relation between deltaS(double dagger) and deltaH(double dagger); however, in water, the deltaS(double dagger) terms are not compensated by the deltaH(double dagger) terms. Alternating irradiation of the UV and visible lights resulted in a reversible change in the induced circular dichroism (ICD) bands of trans-1 and cis-1. In contrast, after the UV light irradiation, the ICD band of trans-2 decreased without the appearance of any bands of cis-2. The NMR spectra of 2 in DMSO showed coalescence of the split signals for the methylene and for the viologen protons due to the shuttling of alpha-CyD. Both the NOE differential spectra for cis-1 in water after UV light irradiation and 2 in DMSO after heating to 120 degrees C showed the negative NOE peaks assigned to interior protons of alpha-CyD, suggesting that alpha-CyD in cis-1 exists at the one ethylene moiety, and alpha-CyDs in cis-2 and 2 heated in DMSO exist at the propylene moieties.     

A novel synthesis of (+)-biotin from L-cysteine

(+)-Biotin (1) was synthesized in 25% overall yield over 11 steps from L-cysteine. The contiguous asymmetric centers at C-3a and C-6a were formed through a novel and highly stereoselective Lewis base-catalyzed cyanosilylation of alpha-amino aldehyde 3 to provide anti-O-TMS-cyanohydrin 4 with high stereoselectivity and in high yield (anti/syn = 92:8, 96%). Treatment of 4 with a di-Grignard reagent, 1,4-bis(bromomagnesio)butane, followed by carbon dioxide, efficiently installed the 4-carboxybutyl chain at C-4 to give keto acid 5. The final cyclization to bicyclic compound 7b, a precursor to 1, was realized by a palladium-catalyzed intramolecular allylic amination of cis-allylic carbonate 6b that was elaborated from 5.     

Classical Valence Similarity in Fullerene Derivatives

Summary.  The generalized Pauling bond order was enumerated in the C₆₀ fullerene cage molecule (truncated icosahedral symmetry). This index measures chemical similarity in fullerene derivatives such as dihydrofullerene (C₆₀H₂), anionized monohydrofullerene (C₆₀H⁻), N-substituted monohydrofullerene (C₅₉NH), the fullerene dimer ((C₆₀)₂), and the dianionic fullerene dimer ((C₆₀)₂ ²⁻). It is also useful in judging the chemical stability of isomers. Received October 9, 2001. Accepted November 9, 2001     

High-Pressure Synthesis and Crystal Structure of B2S3

Two new high-pressure phases of binary boron-sulfur compounds, B₂S₃-II and B₂S₃-III, were synthesized at 3-6.2 GPa. A single crystal of B₂S₃-III was grown and the structure was determined (tetragonal, space group I4₁/a, a=16.086(2) Å, c=30.488(4) Å; V=7888(1) ų, Z=100, R=3.0% and R_w=2.8% for 3047 observed data [I>3.00σ(I)]. The structure of B₂S₃-III consists of two kinds of macrotetrahedra built up from 20 and 34 BS₄-tetrahedra. These macrotetrahedra connect each other to form an interpenetrating zincblende-type structure by sharing BS₄-tetrahedra at the corners of those. B₂S₃-III is anticipated having a rather disordered structure. From the UV-Vis diffuse reflectance spectrum, the optical band gap of B₂S₃-III was estimated to be 3.7 eV.     

Separation and identification of Taxifolin 3-O-glucoside isomers from Chamaecyparis obtusa (Cupressaceae)

Taxifolin 3-O-glucoside isomers, [(2R, 3R)-, (2R, 3S)-, (2S, 3R)- and (2S, 3S)-] were isolated from leaves of Chamaecyparis obtuse (Cupressaceae). Their structures were elucidated on the basis of UV, MS, CD, 1H- and 13C-NMR spectral data, including 2D shift correlation. It was found that the compounds could be distinguished by the use of 1H- and 13C-NMR spectral data.     

Radioisotopes of thirteen elements in intertidal coastal and estuarine sediments in the Irish Sea

A survey has been carried out of⁴⁰K,⁶⁰Co,⁹⁹Tc,¹⁰⁶Ru,¹²⁵Sb,¹²⁹I,¹³⁴Cs,¹³⁷Cs,¹⁵⁴Eu,²²⁶Ra,²²⁸Ra,²³⁷Np,²³⁸Pu,^239,240Pu,²⁴¹Pu,²⁴¹Am,²⁴²Cm, and^243,244Cm activities in sediments from the Irish Sea. Several of these radionuclides were measured independently at two separate laboratories to enable the intercomparison of the results produced. The comprehensive data set generated allows the present spatial distributions of these radionuclides in coastal sediments to be examined in relation to sediment textural characteristics and by comparison with earlier survey, enables the temporal trends in their activities to be determined. In general all artificial radionuclides showed lower activities in sediments in response to falling discharges from Sellafield and relationships with either grain size, distance from Sellafield or both. Isotope ratios were similar to cumulative weighted activity ratios rather than present day values due to sediment mixing. Pu levels supplied evidence for the lag in response of sediment deposits with increasing distance from Sellafield due to sediment transport.