Evolution of water vapor from indium-tin-oxide transparent conducting films fabricated by dip coating process

Tin-doped indium oxide In₂O₃ (indium-tin-oxide) transparent conducting films were fabricated on silicon substrates by a dip coating process. The thermal analysis of the ITO films was executed by temperature-programmed desorption (TPD) or thermal desorption spectroscopy (TDS) in high vacuum. Gas evolution from the ITO film mainly consisted of water vapor. The total amount of evolved water vapor increased on increasing the film thickness from approx. 25 to 250 nm and decreased by increasing the preparation temperature from 365 to 600°C and by annealing at the same temperature for extra 10 h. The evolution occurred via two steps; the peak temperatures for 250 nm thick films were approx. 100-120 and 205-215°C. The 25 nm thick films evolved water vapor at much higher temperatures; a shoulder at approx. 150-165°C and a peak at approx. 242°C were observed. The evolution temperatures increased by increasing the preparation and the annealing temperatures except in case of the second peak of the 25 nm thick films. The evolution of water vapor at high temperature was tentatively attributed to thermal decomposition of indium hydroxide, In(OH)₃, formed on the surface of the nm-sized ITO particles. This revised version was published online in August 2006 with corrections to the Cover Date.     

Polymerization of vinyl acetate in fatty acids and properties of poly (vinyl alcohols) derived from the poly (vinyl acetates)

Polymerization of vinyl acetate (VAc) in various fatty acids (carbon numbers 4–18) was carried out. Chain transfer constants to the acids were determined to be 20–35×10^–4, from which the constant to a methylene group was obtained to be 0.73×10^–4. Viscometry in aqueous solution of derived poly (vinyl alcohol) (PVA) showed the usual behavior in terms of Huggins constant obtained by the Schulz–Blaschkes equation for PVAs derived from fatty acid systems lower than hexadecanoic acid. PVA derived from octadecanoic acid system showed abnormality, indicating association of alkyl groups. Contact angles on surfaces of PVAs cast from aqueous solutions were measured. While those of PVA derived from lower acid systems were 62°, those of PVAs derived from higher aids were higher and increased to 92° with increase in carbon number to octadecanoic acid. Alkyl groups in the PVAs were estimated to appear on the surfaces. Surface tension of aqueous solution of the PVA derived from octadecanoic acid showed high surface activity, and depended on pH of the solution, indicating the presence and cleavage of lactone ring at the combined portion between PVA and the acid.     

Synthesis of stereocontrolled α,α-difluoro-β-hydroxycarbonyl materials

Synthesis and synthetic utilities of stereocontrolled α,α-difluoro-β-hydroxy-γ,δ-unsaturated carbonyl compounds via enzymatic resolution with lipase PS (Pseudomonas cepacia, Amano Pharmaceutical Co. Ltd.) or lipase MY (Candida rugosa, Meito Sangyo Co. Ltd.) were described, and then the absolute configuration of obtained chiral materials was determined by the modified Mosher's method.     

Isotachophoretic determination of mobility and pKa by means of computer simulation : V. Evaluation of mo and pKa of twenty-eight dipeptides and assessment of separability

Isotachophoretic qualitative indices, R_E, for twenty-eight dipeptides were measured in the range pH 7.4–9.6. The absolute mobility, m_o, and pK_a values were evaluated by the use of the least-squares method, utilizing a simulation of the isotachophoretic steady state. The m_o values were newly evaluated and the pK_a values were in good agreement with literature values. By comparison of the evaluated m_o and pK_a values of the dipeptides with those of the constituent amino acids, simple relationships were found which may be used to estimate the m_o and pK_a values of other dipeptides. The separability of the dipeptides was also evaluated by considering the differences between their simulated effective mobilities. It is concluded that isotachophoresis is very convenient for the separation of dipeptides and their constituent amino acids.     

Total synthesis of (+)-pederine. A simple synthetic method for N-(1-methoxyalkyl)amides

A mild one-pot method for the synthesis of acyclic N-(1-methoxyalkyl)amides starting from carboxylic acids and methyl imidates had been developed and applied to the total synthesis of the insect poison pederine $\text{1}$.     

Novel Z-selective head-to-head dimerization of terminal alkynes catalyzed by lanthanide half-metallocene complexes

Various terminal alkynes have been cleanly dimerized into the corresponding head-to-head (Z)-enynes by use of the half-metallocene lutetium alkyl complexes Me2Si(C5Me4)(NAr)Lu(CH2SiMe3)(THF) (Ar = Ph, C6H3Me2-2,6, C6H2Me3-2,4,6) as catalysts. Aromatic C-Cl, C-Br, and C-I bonds, which are known to be extremely susceptible to reductive cleavage by transition metals, survived in the present reactions. The corresponding dimeric alkynide species [Me2Si(C5Me4)(NAr)Lu(mu-CCR)]2 are thought to be the true catalysts, some of which have been isolated and structurally characterized. These alkynide species were thermally stable and soluble at the reaction temperatures (80-110 degrees C), but they precipitated upon cooling to room temperature after completion of the reaction. Therefore, this catalyst system works homogeneously but can be separated and reused, thus constituting the first example of a recyclable catalyst system for the dimerization of terminal alkynes and also the first example of (Z)-selective head-to-head dimerization of aromatic terminal alkynes.     

Heteroatom-guided torquoselective olefination of alpha-oxy and alpha-amino ketones via ynolates

Ynolates were found to react with alpha-alkoxy-, alpha-siloxy-, and alpha-aryloxyketones at room temperature to afford tetrasubstituted olefins with high Z selectivity. Since the geometrical selectivity was determined in the ring opening of the beta-lactone enolate intermediates, the torquoselectivity was controlled by the ethereal oxygen atoms. From experimental and theoretical studies, the high Z selectivity is induced by orbital and steric interactions rather than by chelation. In a similar manner, alpha-dialkylamino ketones provided olefins with excellent Z selectivity. These products can be easily converted into multisubstituted butenolides and gamma-butyrolactams in good yield.