Development of miniaturized multi-channel high-performance liquid chromatography for high-throughput analysis

We have developed miniaturized multi-channel high-performance liquid chromatography (HPLC) system. With this system, we can simultaneously separate multiple samples, using a single high-pressure gradient pump, a chip-based sample injection unit, a monolithic silica capillary column array, and a multi-channel UV detection unit based on fiber optics. The injection unit has a simplified structure composed of brass housing and a quartz microchip having microchannels and access ports, which enable a direct injection of sample to multi-channel by commercial multichannel micropipette. Moreover, that possesses a function of microvalve, and on-chip definition of sample injection plugs achieved with a cross channel injection method, providing each column of monolithic silica capillary array. The substances in channels were simultaneously detected with UV having multiple cells. Standard samples were analyzed for characterizing newly developed system, and sharp peaks were obtained with reproducibility data of < 0.9% (R.S.D.). Analysis of tryptic digestion of casein was also employed. These results show that the novel multi-channel HPLC system has the benefits for the high-throughput analysis in the post-genomic analysis/combinatorial chemistry.     

Porphyrin boxes constructed by homochiral self-sorting assembly: optical separation, exciton coupling, and efficient excitation energy migration

meso-Pyridine-appended zinc(II) porphyrins Mn and their meso-meso-linked dimers Dn assemble spontaneously, in noncoordinating solvents such as CHCl3, into tetrameric porphyrin squares Sn and porphyrin boxes Bn, respectively. Interestingly, formation of Bn from Dn proceeds via homochiral self-sorting assembly, which has been verified by optical separations of B1 and B2. Optically pure enantiomers of B1 and B2 display strong Cotton effects in the CD spectra, which reflect the length of the pyridyl arm, thus providing evidence for the exciton coupling between the noncovalent neighboring porphyrin rings. Excitation energy migration processes within Bn have been investigated by steady-state and time-resolved spectroscopic methods in conjunction with polarization anisotropy measurements. Both the pump-power dependence on the femtosecond transient absorption and the transient absorption anisotropy decay profiles are directly associated with the excitation energy migration process within the Bn boxes, where the exciton-exciton annihilation time and the polarization anisotropy rise time are well described in terms of the F?rster-type incoherent energy hopping model by assuming a number of hopping sites of N = 4 and an exciton coherence length of L = 2. Consequently, the excitation energy hopping rates between the zinc(II) diporphyrin units have been estimated for B1 (48 ps)(-1), B2 (98 +/- 3 ps)(-1), and B3 (361 +/- 6 ps)(-1). Overall, the self-assembled porphyrin boxes Bn serve as a well-defined three-dimensional model for the light-harvesting complex.     

Photochemical valence tautomerization of berberinephenolbetaines to 8,14-cycloberbines,versatile aziridine derivatives for spirobenzylisoquinolines

Irradiation of the berberinephenolbetaines ($\text{8}$$\text{a}$, $\text{8}$$\text{b}$, and $\text{8}$$\text{c}$) effected valence tautomerization to give the 8,14-cycloberbines ($\text{9}$$\text{a}$, $\text{9}$$\text{b}$, and $\text{9}$$\text{c}$), the aziridine derivatives, in high yield. The 8,14-cycloberbines were efficiently converted to the spirobenzylisoquinolines by regioselective C bond cleavage.     

Emulsifier-free emulsion polymerization of tetrafluoroethylene by radiation. III. Simultaneous formation of hydrofluoric acid

Simultaneous formation of hydrofluoric acid (HF) in the radiation-induced polymerization of tetrafluoroethylene (TFE) was investigated. HF concentration in PTFE latex was determined mainly by conductometric titration with 0.01 and 0.001N NaOH. The amount of HF formed is almost independent of agitation speed and the amount of n-hexadecane added and is maximal at ca. 70°C corresponding to the rate of polymerization. The rate of HF formation increases with the initial pressure of TFE monomer and dose rate and decreases with polymerization or TFE consumption. This fact suggests that HF is formed mainly by TFE reactions and not by the degradation of PTFE. The mechanism of HF formation in this reaction system in the absence of oxygen is shown in the following two schemes: scheme I is the reaction of TFE with primary radicals (OH·, H·, e) from the radiolysis of water; scheme II is the reaction of water with the species from the radiolysis of TFE. On the assumption that HF is formed only according to scheme I, the G value of HF formation G(HF)_calc can be calculated as 11.25. All observed G values G(HF)_obs are larger than G(HF)_calc. When the polymerization is carried out at 20 kg/cm² under various dose rates, G(HF)_obs increases with the dose rate. When the polymerization is carried out at 3.0 × 10⁴ rad/hr under various pressures, G(HF)_obs decreases with the decrease in pressure from 20 to 2 kg/cm² and is fairly close to G(HG)_calc at 2 kg/cm². This indicates that HF formation is due mainly to scheme II at high pressure (in the presence of enough TFE) and to scheme I as the pressure is lowered.     

Pressure-driven sample injection with quantitative liquid dispensing for on-chip electrophoresis.

A novel pressure-driven sample injection method was developed as an alternative to electrokinetic injection, and electrophoretic separation was carried out on a microfabricated device employing this method. This method enables a defined volume of liquid dispensing, followed by instantaneous injection driven by pneumatic pressure, greatly simplifying the injection procedure. A particular microstructure, called a "metering chamber", has been designed for the quantitative dispensing of an ultra-low volume of sample liquid; a "hydrophobic passive valve" equipped with an air vent channel is employed for injecting a dispensed sample into the separation channel. The reproducibility of dispensing was 3.3% (n = 15), expressed by the variation of dispensed volumes. The electrophoretic separation of DNA fragments was performed using this injection method, varying the injection volumes from 0.45 to 4.0 nL, and the separation efficiencies were compared. This precise injection method, easily variable in injection volumes, is highly suitable for quantitative as well as qualitative electrophoretic analyses.     

Synthesis of polydithiourethanes and their thermal,optical, and mechanical properties originated from monomers structure

Polyaddition of various diisothiocyanates and dithiols was achieved with triethylamine in dimethylformamide at 25 °C for 12 h under nitrogen, and then the corresponding polydithiourethanes (PDTUs) were obtained with high yield and molecular weight without depending on the monomer structures, although the dithiol monomer of the low nucleophilicity was unsuitable for polyaddition in this system. The chemical and physical properties of the obtained PDTUs such as solvent solubility, glass transition temperature, thermal stability, transparency, refractive index, and tensile strength, were analyzed in detail by gel permeation chromatography, nuclear magnetic resonance, Fourier transform infrared–attenuated total reflection, ultraviolet–visible, differential scanning calorimetry, thermogravimetric analysis, and tensile testing measurements. These results proved that PDTUs and their cast films having the aliphatic diisothiocyanate and dithiol moieties exhibited excellent chemical and physical properties compared to that of the aromatic PDTUs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2255–2262     

Construction of an asymmetric quaternary carbon via an asymmetric aza-Claisen rearrangement and its application in the total synthesis of (+)-α-cuparenone

Excess lithium hexamethyldisilazide (LHMDS) with LiCl prompted the asymmetric aza-Claisen rearrangement of carboxamide and retarded the decomposition of its amide enolate. The addition of these two reagents was a key step that led to the total synthesis of (+)-α-cuparenone with a stereogenic quaternary center.     

Determination of l‐tryptophan and l‐kynurenine derivatized with (R)‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole by LC‐MS/MS on a triazole‐bonded column and their quantification in human serum

The concentrations of l ‐tryptophan (Trp) and the metabolite l ‐kynurenine (KYN) can be used to evaluate the in‐vivo activity of indoleamine 2,3‐dioxygenase (IDO) and tryptophan 2,3‐dioxygenase (TDO). As such, a novel method involving derivatization of l ‐Trp and l ‐KYN with (R)‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole (DBD‐PyNCS) and separation by high‐performance liquid chromatography (HPLC) with tandem mass spectrometric (MS/MS) detection on a triazole‐bonded column (Cosmosil HILIC®) was developed to determine their concentrations. The optimized mobile phase, CH₃CN/10 mm ammonium formate in H₂O (pH 5.0) (90:10, v/v) eluted isocratically, resulted in satisfactory separation and MS/MS detection of the analytes. The detection limits of l ‐Trp and l ‐KYN were approximately 50 and 4.0 pm , respectively. The column temperature affected the retention behaviour of the Trp and KYN derivatives, with increased column temperatures leading to increased capacity factors; positive enthalpy changes were revealed by van't Hoff plot analyses. Using the proposed LC‐MS/MS method, l ‐Trp and l ‐KYN were successfully determined in 10 μL human serum using 1‐methyl‐l ‐Trp as an internal standard. The precision and recovery of l ‐Trp were in the ranges 2.85–9.29 and 95.8–113%, respectively, while those of l ‐KYN were 2.51–16.0 and 80.8–98.2%, respectively. The proposed LC‐MS/MS method will be useful for evaluating the in vivo activity of IDO or TDO. Copyright © 2016 John Wiley & Sons, Ltd.