Study of SPG membrane emulsification processes for the preparation of monodisperse core-shell microcapsules

Experimental investigations on the Shirasu-porous-glass (SPG)-membrane emulsification processes for preparing monodisperse core-shell microcapsules with porous membranes were carried out systematically. The results showed that, to get monodisperse oil-in-water (O/W) emulsions by SPG membrane emulsification, it was more important to choose an anionic surfactant than to consider hydrophile-lipophile balance (HLB) matching. Increasing the viscosity of either the disperse phase or the continuous phase or decreasing the solubility of the disperse phase in the continuous phase could improve both the monodispersity and the stability of emulsions. With increasing monomer concentration inside the disperse phase, the monodispersity of emulsions became slightly worse and the mean diameter of emulsions gradually became smaller. Monodisperse monomer-containing emulsions were obtained when the SPG membrane pore size was larger than 1.0 micro m, and from these emulsions satisfactory monodisperse core-shell microcapsules with a porous membrane were prepared. On the other hand, when the SPG membrane pore size was smaller than 1.0 mciro m, no monodisperse emulsions were obtained because of the formation and chokage of solid monomer crystals in the pores or at the end of the pores of the SPG membrane. This was due to the remarkable solvation and diffusion of the solvent in water. With increasing the emulsification time the average emulsion diameter generally decreased, and the monodispersity of the emulsions gradually became worse.     

The reaction of isocyanide—mercuric chloride complexes with amines. Preparation of guanidines

Isocyanide—mercuric chloride complexes react readily with an excess of primary and secondary amines to give guanidines and metallic mercury in high yields through a redox decomposition reaction. In the presence of triethylamine, isocyanide—mercuric chloride complexes react with an equimolar amount of a primary amine to give a carbodiimide and metallic mercury. An intermediate organomercuric compound was isolated in the reaction of the isocyanide—mercuric chloride complex with pyrrolidone.     

Uneven distribution of ventilation—perfusion ratios in lungs estimated by a modified Newton method

The uneven distribution of ventilation—perfusion ratios ( ) in diseased lungs is the major cause of arterial hypoxemia. Farhi and Yokoyama (1967) and Yokoyama and Farhi (1967) were the first who used physiologically inert gases as indicator gases to assess the uneven distribution of Wagner and his coworkers in San Diego (1977b) extended the method and elaborated the multiple inert gas elimination technique in which blood flows in 50 compartments with different were estimated based on data for 6 indicator gases. They analyzed the indicator gas data through an enforced smoothing technique with the ridge regression. To get smooth distributions, they introduced a weighting function for compartments and an additional treatment for the non-negativity of the blood flow. The weighting function was empirically obtained. We analyzed the data without putting any weights on compartments nor any additional treatment for non-negativity of blood flow. The analytical method in the present study was a modified Newton method, which is one of the enforced smoothing method. Our method was capable of recovering all distribution patterns that were found through the method reported by Wagner et al. (1977b).     

Ring opening reaction of gem-difluorocyclopropyl ketones with nucleophiles

Syntheses of gem-difluorocyclopropyl ketones (3a–d) and their reactions with nucleophiles are described. Ring opening reactions of 3a,c and d with a methanolate and a thiolate anion took entirely different courses of bond scission of the cyclopropane ring.     

Zirconium-mediated intramolecular ester transfer reaction: synthesis of alpha-substituted gamma-aminobutyric acid (GABA) derivatives

[reaction: see text]. The zirconium-mediated intramolecular ester transfer reaction of N-alkenyl carbamate derivatives proceeded to give alpha-substituted gamma-aminobutyric acid (GABA) derivatives in good to excellent yields. Quenching experiments of the reaction mixture with iodine or O2 indicated the presence of a cyclopropane intermediate. The resulting iodide was converted to 2-substituted pyrrolidine-3-carboxylate and/or alpha-alkylidene-gamma-aminobutyric acid derivatives in a stereospecific manner.     

Synthesis of poly (ether-sulfone-amide)s by palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structure,aromatic diamines,and carbon monoxide

A general method for the preparation of aromatic poly (ether-sulfone-amide)s has been developed. Polymerization is based on the palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structural units, aromatic diamines, and carbon monoxide. Reactions were carried out in N, N-dimethylacetamide (DMAc) in the presence of palladium catalyst, triphenylphosphine, and 1,8-diazabicyclo [5,4,0]–7–undecene (DBU), and gave a series of poly (ether-sulfone-amide)s with inherent viscosities up to 0.86 dL/g under mild conditions. The polymers were quite soluble in strong acids, dipolar aprotic solvents, and pyridine. Thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 470°C in air. The glass transition temperatures of the polymers were around 230°C, which are higher than those of poly (ether-sulfone) analogues. These polymers also showed the good tensile strengths and tensile modulus. © 1994 John Wiley & Sons, Inc.     

Nonclassical Urea Oligomers. VII. Binding Specificity of Carbanilido-ethylenimine Oligomer: Absorption Behavior in Suspension

Polyester elastomers were prepared by block copolymerization of dimethyl terephthalate (DMT), butanediol (BDO), and polytetramethylene glycol (PTMG). Polyester from DMT and butanediol forms a high-melting hard segment in block copolyester to prevent undue chain slippage when fibers are stretched. High elongation was provided by soft segment which consisted of condensation product from DMT and PTMG.

Experiments were carried out to determine the effect of composition variables on the properties of these elastomers, such as glass transition temperature, elongation at break, tenacity, and elastic recovery. The study on molecular characteristics of the elastic polyester showed that a leather-like region exists between glassy and rubbery regions. These elastomers were melt-spun to give elastic fibers which are competitive with commercially available Spandex-type fibers.     

Synthesis of Star-Shaped Polymers via Coordination of Bipyridyl-Terminated Polyoxyethylene with Metal Ions

Abstract

This paper describes the synthesis of various star-shaped polymers by means of complexation of bipyridyl-terminated polyoxyethylene with Ru(II) ion. Three kinds of bipyridyl-terminated polyoxyethylenes of different molecular weights were prepared from the corresponding polyoxyethylene monomethyl ethers with narrow molecular weight distributions. Bipyridyl was found to be introduced quantitatively at the end of the polymers based on the results of UV spectra. The formation of a star-shaped polymer was carried out by the reaction of RuCl₃ with three equivalents of bipyridyl-terminated polyoxyethylene. The UV spectrum of the star-shaped polymer obtained supported the formation of a typical Ru(II) tris(bipyridyl) complex. From the results of GPC, the star-shaped polymer obtained had a higher molecular weight than the pre-polymer and showed a narrow molecular weight distribution. In the case of a Ni(II) or a Co(II) complex, however, the star-shaped polymer was found to be dissociated into three linear prepolymers under the conditions of GPC measurement.     

Polymerization of Cyclic Ethers

Abstract

In the present series of studies on the cationic polymerization of cyclic ethers, the reactivities of cyclic ethers were quantified and the effect of the catalyst upon the polymerization kinetics was revealed. These kinetic analyses were successfully performed by means of our “phenoxyl end-capping method”. The change of the reactivity by the ring size of the monomer was interestingly demonstrated. In addition, it is emphasized that the frequency factor as well as the activation energy influence the rate constant of propagation. As to the effect of catalyst upon the polymerization kinetics, the most important conclusion is that the rate constant of propagation changes very little according to the changes of the catalyst components. Variation of the conversion rate by a change of catalyst is due to differences in the rates of the initiation and the termination reactions.