Heat-generating property of a local plasmon resonator under illumination

We have investigated the heat generation from gold nanoparticles resulting from their local plasma resonance. We have demonstrated the self-assembly of Au nanoparticle arrays/dielectric layer/Ag mirror sandwiches, i.e., a local plasmon resonator, using a dynamic oblique deposition technique. The thicknesses of the Au and dielectric layers were changed combinatorially on a single substrate. As a result, local plasmon resonator chips were successfully fabricated. Because of strong interference, their optical absorption can be controlled between 0.0% and 97% in the near-IR region, depending on the thickness of the dielectric layer. We evaluated the heat generation from Au nanoparticles by measuring the temperature of water with which a cell prepared on a chip is filled under laser illumination. The change in the water temperature is proportional to the optical absorption of the local plasmon resonator chips. This suggests that the photothermal conversion efficiency can be controlled by interference. These features make the application of the local plasmon resonator to nanoheaters, which can spatiotemporally control heat generation, suitable.     

Photoluminescence of CuGaS2 and heterostructure formation with sputtered ZnS

Summary CuGaS₂ crystals grown by iodine transport exhibit room temperature photoluminescences at 2.45 eV and at 1.44 eV. The spectral distribution of the green emission is shown to be relatively well described by the calculated curve for a direct band-to-band transition withk-selection. The heterojunction formation has been tried between sulfur-treated CuGaS₂ crystals and low-resistivity amorphous ZnS films prepared by sputtering at room temperature. TheI–V characteristic of the diode shows rectifying behaviour, but no injection luminescence has been observed. Paper presented at the ?V International Conference on Ternary and Multinary Compounds?, held in Cagliari, September 14–16, 1982.     

Critical exponent and critical blow-up for quasilinear parabolic equations

B ₂-groups are special (torsion-free) abelian Butler groups. The interest in this class of groups comes from representation theory. A particular functor, also called Butler functor, connects algebraic properties of the category of free abelian groups with (a few) distinguished subgroups with these Butler groups. This helps to understand Butler groups and caused lots of activities on Butler groups. Butler groups were originally defined for finite rank, however a homological connection discovered by Bican and Salce opened the investigation of Butler groups of infinite rank. Despite the fact that classifications of Butler groups are possible under restriction even for infinite rank (see a forthcoming paper by Files and Göbel [Mathematische Zeitschrift]), general structure theorems are impossible. This is supported by the following very special case of the Main Theorem of this paper, showing that any ring with a free additive group is an endomorphism ring of a Butler group. The result implies the existence of large indecomposable or of large superdecomposable Butler groups as well as the existence of counter-examples for Kaplansky’s test problems.     

Rapid large-scale magnetic-field dissipation in a collisionless current sheet via coupling between Kelvin-Helmholtz and lower-hybrid drift instabilities

Rapid large-scale magnetic-field dissipation is observed in a full kinetic simulation of cross-field current instabilities in a current sheet even when the thickness of the current sheet is at ion scale. The Kelvin-Helmholtz instability caused by the velocity shear between the current-carrying ions and the cold background ions excites the lower-hybrid drift instability at the edges of the undulated current sheet. We show that the nonlinear coupling between these two instabilities is responsible for the observed rapid dissipation. The simulation result presents a new route for magnetic-field dissipation in an ion-scale current sheet and demonstrates the general significance of nonlinear cross-scale coupling in collisionless plasmas.     

Direct Monitoring of Thickness and Refractive Index of Optical Thin Film Deposited on Fiber End-face

We propose a system for depositing thin films on waveguides which enables low-temperature deposition and precise control of the refractive index and film thickness. It is composed of a conventional ion-beam sputtering (IBS) system and a new system for directly monitoring film characteristics during deposition. We controlled refractive indices over a wide range from 1.52 to 1.97 by moving the sputtering targets (SiO₂ and Si₃N₄) in the IBS system. The refractive index or film thickness was in-situ monitored by observing the optical power reflected from the end-face of a monitoring fiber set in the deposition chamber. Antireflection coating films were successfully deposited on a fiber end-face and a laser diode chip facet with low reflectivity from 0.05 to 0.07%. This deposition system is attractive for constructing highly functional optical devices for future photonic networks.     

Variable-priority queue and doughnut routing

This paper proposes a new data structure called a variable-priority queue. The queue supports, in addition to the ordinary queue operations, an operation MIN to find an item of minimum key and three operations to change keys of items. Any sequence of these m operations can be processed in O(m) time. Furthermore, as its application, this paper presents two efficient algorithms for network problems. The first finds multicommodity flows in cycles in linear time. The second, using the first, finds edge-disjoint paths connecting terminal pairs in a doughnut-shaped grid. The grid is bounded by two nested rectangles, and terminals are specified on the two rectangular boundaries outside the four corners. If there are k terminal pairs and all the terminals are ordered in clockwise order around rectangles, then the algorithm decides in O(k) time whether there are edge-disjoint paths connecting terminals in the grid, and actually finds edge-disjoint paths in O(k log k) time.     

Covering continuous demand in the plane

Continuous demand is generated in a convex polygon. A facility located in the area covers demand within a given radius. The objective is to find the locations for p facilities that cover the maximum demand in the area. A procedure that calculates the total area covered by a set of facilities is developed. A multi start heuristic approach for solving this problem is proposed by applying a gradient search from a randomly generated set of p locations for the facilities. Computational experiments for covering a square area illustrate the effectiveness of the proposed algorithm.     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.