用硼酸作催化剂一锅法合成双（二氢化嘧啶酮-4-基）苯

A simple effective synthesis of bis(dihydropyrimidinone-4-yl)benzene derivatives, using boric acid as catalyst,from isophthalic aldehyde or terephthalic aldehyde, 1,3-dicarbonyl compounds and urea or thiourea in glacial acetic acid was described. As the expansion of the classical Biginelli reaction, this method has the advantage of excellent yields 83%-94% and short reaction time 0.5-1.5 h.     

Ab initio studies on photochemical reactions of Al atoms with H2 molecules

Potential energy surfaces are computed for the five lowest electronic states of the Al + H₂ system in its symmetric nuclear arrangement. Mechanisms of photochemical reactions of Al atoms with H₂ molecules are proposed, based on the calculated potential energy surfaces. The insertion reaction of the ground-state Al atom into the H₂ molecule is difficult under normal conditions. However, photoexcited Al atoms are capable of reacting with H₂ molecules along different pathways. The results obtained are consistent with experimental findings. The potential energy profiles of the dissociation reaction, AlH₂ → AlH + H, are traced by employing the UMP2 energy gradient method. Photocexcited Al atoms react with H₂ molecules along the 2 ²A₁ state pathway, and the AlH₂(²Σ_g⁺) formed dissociates easily into AlH(¹Σ) and H(²S). The dissociation reaction of ground-state AlH₂ is difficult.     

A fluorescence-based method for direct measurement of submicrosecond intramolecular contact formation in biopolymers: an exploratory study with polypeptides.

A fluorescent amino acid derivative (Fmoc-DBO) has been synthesized, which contains 2,3-diazabicyclo[2.2.2]oct-2-ene (DBO) as a small, hydrophilic fluorophore with an extremely long fluorescence lifetime (325 ns in H2O and 505 ns in D2O under air). Polypeptides containing both the DBO residue and an efficient fluorescence quencher allow the measurement of rate constants for intramolecular end-to-end contact formation. Bimolecular quenching experiments indicated that Trp, Cys, Met, and Tyr are efficient quenchers of DBO (k(q) = 20, 5.1, 4.5, and 3.6 x 10(8) M(-1) x s(-1) in D2O), while the other amino acids are inefficient. The quenching by Trp, which was selected as an intrinsic quencher, is presumed to involve exciplex-induced deactivation. Flexible, structureless polypeptides, Trp-(Gly-Ser)n-DBO-NH2, were prepared by standard solid-phase synthesis, and the rates of contact formation were measured through the intramolecular fluorescence quenching of DBO by Trp with time-correlated single-photon counting, laser flash photolysis, and steady-state fluorometry. Rate constants of 4.1, 6.8, 4.9, 3.1, 2.0, and 1.1 x 10(7) s(-1) for n = 0, 1, 2, 4, 6, and 10 were obtained. Noteworthy was the relatively slow quenching for the shortest peptide (n = 0). The kinetic data are in agreement with recent transient absorption studies of triplet probes for related peptides, but the rate constants are significantly larger. In contrast to the flexible structureless Gly-Ser polypeptides, the polyproline Trp-Pro4-DBO-NH2 showed insignificant fluorescence quenching, suggesting that a high polypeptide flexibility and the possibility of probe-quencher contact is essential to induce quenching. Advantages of the new fluorescence-based method for measuring contact formation rates in biopolymers include high accuracy, fast time range (100 ps-1 micros), and the possibility to perform measurements in water under air.     

Factors controlling the drop evaporation constant

In this paper, we discuss the factors affecting drop evaporation. We found that the droplet morphology at a specific temperature was controlled by the physical properties of the liquid itself, such as the molecular weight, density, diffusion coefficient in air, and heat of vaporization. Two processes are included in drop evaporation: diffusion of liquid molecules into the air (diffusion part) and flow of the liquid molecules from inside the drop to the free outer shell liquid layer within the liquid-vapor interface (evaporation part). The diffusion part remained steady during drying and was not sensitive to the variation of temperature. The evaporation part, however, was an active factor and determined the differences in drop evaporation behaviors.     

The Constituents of the Leaves of Chamaecyparis Formosensis Matsum

Forty one terpenoidal compounds were isolated from the essential oil of Chamaecyparis formosensis Matsum. The dominant component is α-pinene. Other major components include β-pinene, 3-carene, α-terpineol, γ-muurolene, and kaurene.     

Trifluoromethylation of Alkyl Radicals: Breakthrough and Challenges†

Trifluoromethylation of alkyl radicals is emerging as a powerful tool for C(sp³)–CF₃ bond formations. Based on the hypothesis of CF₃ group transfer from Cu(II)–CF₃ to alkyl radicals, a number of trifluoromethylation reactions have been developed, including trifluoromethylation of alkyl halides, decarboxylative trifluoromethylation of aliphatic carboxylic acids, C(sp³)–H trifluoromethylation, amino‐ and carbo‐trifluoromethylation of alkenes, etc. Challenges in this intriguing field are also discussed.     

Pharmacokinetic detection of penicillin excreted in urine using a totally internally reflected resonance light scattering technique with cetyltrimethylammonium bromide

A quantitative analysis method for penicillins including ampicillin (AmP), benzyl penicillin (BP), oxacillin (OA) and amoxycillin (AmO) is proposed that makes use of the totally internally reflected resonance light scattering (TIR-RLS) signal from the penicillin at the H₂O/CCl₄ interface in the presence of cetyltrimethylammonium bromide (CTMAB), and enables the pharmacokinetics of penicillin taken orally and excreted through urine to be monitored. Penicillin is coadsorbed with CTMAB at the H₂O/CCl₄ interface in neutral solution, resulting in the formation of ion associates that display greatly enhanced TIR-RLS signals (maximum at 368–372 nm). This enhanced TIR-RLS intensity was found to be proportional to the penicillin concentration over the range 0.2×10^–6 to 2.2×10^–6 mol L^–1, with limits of determination (3) of 5.0×10^–8 to 7.0×10^–8 mol L^–1. Pharmacokinetics studies performed using the present method show that the excretion of orally-taken ampicillin through urine has a half-time of 1.05 h and an excremental quantum over 8 h of 49.3%, respectively.     

ELECTRON TRANSFER REACTIONS OCCURRING UPON LASER FLASH PHOTOLYSIS OF PHOSPHOLIPID BILAYER SYSTEMS CONTAINING CHLOROPHYLL,BENZOQUINONE AND CYTOCHROME c-II. ELECTRICALLY NEUTRAL AND POSITIVELY-CHARGED VESICLES*

Abstract— The primary and secondary electron transfer reactions which occurred upon laser flash photolysis of electrically neutral and positively-charged lipid bilayer vesicles containing chlorophyll, benzoquinone and cytochrome c were determined by time-resolved difference spectral and kinetic measurements, and compared with previous results obtained with negatively-charged vesicles (Y. Fang and G. Tollin, Photochem. Photobiol. 1988). The extent to which oxidized cytochrome c could function as an electron acceptor from triplet state chlorophyll, and reduced cytochrome c could act as an electron donor to chlorophyll cation radical, decreased from negatively-charged to electrically neutral to positively-charged vesicles, in agreement with expectations based on changes in the ability of cytochrome c to bind to the bilayer. In all three types of vesicles, cytochrome c reduction by benzoquinone anion radical occurred in the aqueous phase.     

Fast DNA sequencing up to 1,000 bases by capillary electrophoresis using poly(N,N-dimethylacrylamide) as a separation medium

Poly(N,N-dimethylacrylamide) (PDMA) with a molecular mass of 5.2 x 10(6) g/mol has been synthesized and used in DNA sequencing analysis by capillary electrophoresis (CE). A systematic investigation is presented on the effects of different separation conditions, such as injection amount, capillary inner diameter, polymer concentration, effective separation length, electric field and temperature, on the resolution. DNA sequencing up to 800 bases with a resolution (R) limit of 0.5 (and 1,000 bases with a resolution limit of 0.3) and a migration time of 96 min was achieved by using 2.5% w/v polymer, 150 V/cm separation electric field, and 60 cm effective separation length at room temperature on a DNA sample prepared with FAM-labeled--21M13 forward primer on pGEM3Zf(+) and terminated with ddCTP. Ultrafast and fast DNA sequencing up to 420 and 590 bases (R > or = 0.5) were also achieved by using 3% w/v polymer and 40 cm effective separation length with a separation electric field of 525 and 300 V/cm, and a migration time of 12.5 and 31.5 min, respectively. PDMA has low viscosity, long shelf life and dynamic coating ability to the glass surface. The unique properties of PDMA make it a very good candidate as a separation medium for large-scale DNA sequencing by capillary array electrophoresis (CAE).     

Colloidal adhesion of phospholipid vesicles: high-resolution reflection interference contrast microscopy and theory

High-resolution reflection interference contrast microscopy (HR-RICM) was developed for probing the deformation and adhesion of phospholipid vesicles induced by colloidal forces on solid surfaces. The new technique raised the upper limit of the measured membrane–substrate separation from 1 to 4.5 μm and improved the spatial resolution of the heterogeneous contact zones. It was applied to elucidate the effects of wall thickness, pH and osmotic stress on the non-specific adhesion of giant unilamellar vesicles (ULV) and multilamellar vesicles (MLV) on fused silica substrates. By simultaneous cross-polarization light microscopy and HR-RICM measurements, it was observed that ULV with the wall thickness of a single bilayer would be significantly deformed in its equilibrium state on the substrate as the dimension of its adhesive–cohesive zone was 29% higher than the theoretical value of a rigid sphere with the same diameter. Besides, electrostatic interaction was shown as a significant driving force for vesicle adhesions since the reduction in pH significantly increased the degree of deformation of adhering ULV and heterogeneity of the adhesion discs. The degree of MLV deformation on the solid surfaces was significantly less than that of ULV. When the wall thickness of vesicle increased, the dimension of contact zone was reduced dramatically due to the increase of membrane bending modulus. Most important, the adhesion strength of colloidal adhesion approached that of specific adhesion. Finally, the increase of osmotic stress led to the collapse of adhering vesicles on the non-deformable substrate and raised the area of adhesive contact zone. To interpret these results better, the equilibrium deformation of adhering vesicle was modeled as a truncated sphere and the adhesion energy was calculated with a new theory.