Reaction of 3,4-disubstituted 1,2,5-oxadiazole 2-oxides with dipolarophiles : Substituent and solvent effect on the reaction courses

A variety of symmetrically or unsymmetrically 3,4-disubstituttd furoxans such as dicyano, dialkyl, diacyl, bis(phenylsulfonyl), N.N'-dialkyldicarbamoyl, 3(or 4)-methyl-4(or -3)-phenyl(or nitro, ethoxy, phenoxy, phenylthio, pyrrolidinyl, phenylsulfonyl), 3(or 4)-ethyl-4(or -3)phcnyl, and 3(or 4)-ethoxy-4(or -3)-phenylsulfonylruroxan reacted with dipolarophiles in toluene or xylene at the refluxing temperature to give nitrone-type 1,3-dipolar cycloadducts, 5-substituted 1-aza-2,8-dioxabicyclo-[3.3.0]octanes and/or 3-substituted 2-isoxazoline 2-oxides. On the other hand, some of the furoxans gave 2-isoxazolines via nitrile oxide 1,3-dipolar cycloaddition in a toluene (or xylene)-DMF solvent at the refluxing temperature.     

PEGylated polyplex micelles from triblock catiomers with spatially ordered layering of condensed pDNA and buffering units for enhanced intracellular gene delivery

An A-B-C type triblock copolymer, tandemly aligning two types of polycations with different pKa values in a single polymer strand, was developed for the construction of novel polyplex micelles, satisfying a high DNA condensing ability as well as a proton buffering activity directed to elevating gene transfection. The micelle might feature the distinctive three-layered structure, where an inner polyplex layer of condensed pDNA with poly(l-lysine) (pKa approximately 9.4) as the C segment is successively wrapped with an intermediate layer of poly[(3-morpholinopropyl)aspartamide] (B segment) with a comparatively low pKa of approximately 6.2, to provide a buffering effect, and an outer PEG layer (A segment) as a biocompatible palisade.     

Detection of the His-heme Fe2+-NO species in the reduction of NO to N2O by ba3-oxidase from thermus thermophilus

Reaction pathways in the enzymatic formation and cleavage of the N-N and N-O bonds, respectively, are difficult to verify without the structure of the intermediates, but we now have such information on the heme a(3)(2+)-NO species formed in the reaction of ba(3)-oxidase with NO from resonance Raman spectroscopy. We have identified the His-heme a(3)(2+)-NO/Cu(B)(1+) species by its characteristic Fe-NO and N-O stretching frequencies at 539 and 1620 cm(-)(1), respectively. The Fe-NO and N-O frequencies in ba(3)-oxidase are 21 and 7 cm(-)(1) lower and higher, respectively, than those observed in Mb-NO. From these results and earlier Raman and FTIR measurements, we demonstrate that the protein environment of the proximal His384 that is part of the Q-proton pathway controls the strength of the Fe-His384 bond upon ligand (CO vs NO) binding. We also show by time-resolved FTIR spectroscopy that Cu(B)(1+) has a much lower affinity for NO than for CO. We suggest that the reduction of NO to N(2)O by ba(3)-oxidase proceeds by the fast binding of the first NO molecule to heme a(3) with high-affinity, and the second NO molecule binds to Cu(B) with low-affinity, producing the temporal co-presence of two NO molecules in the heme-copper center. The low-affinity of Cu(B) for NO binding also explains the NO reductase activity of the ba(3)-oxidase as opposed to other heme-copper oxidases. With the identification of the His-heme a(3)(2+)-NO/Cu(B)(1+) species, the structure of the binuclear heme a(3)-Cu(B)(1+) center in the initial step of the NO reduction mechanism is known.     

Electronic polarizability and crystallization of K2O-TiO2-GeO2 glasses with high TiO2 contents

Some K₂O-TiO₂-GeO₂ glasses with a large amount of TiO₂ contents (15-25 mol%) such as 25K₂O-25TiO₂-50GeO₂ have been prepared, and their electronic polarizability, Raman scattering spectra, and crystallization behavior are examined to clarify thermal properties and structure of the glasses and to develop new nonlinear optical crystallized glasses. It is proposed that the glasses consist of the network of TiO₆ and GeO₄ polyhedra. The glasses show large optical basicities of Λ=0.88-0.92, indicating the high polarizabity of TiO_n (n=4-6) polyhedra in the glasses. K₂TiGe₃O₉ crystals are formed through crystallization in all glasses prepared in the present study. In particular, 20K₂O-20TiO₂-60GeO₂ glass shows bulk crystallization and 18K₂O-18TiO₂-64GeO₂ glass exhibits surface crystallization giving the c-axis orientation. The crystallized glasses show second harmonic generations (SHGs), and it is suggested that the distortion of TiO₆ octahedra in K₂TiGe₃O₉ crystals induces SHGs.     

A synthesis of chiral 1,1,3-trisubstituted 1,2,3,4-tetrahydro-beta-carbolines by the Pictet-Spengler reaction of tryptophan and ketones: conversion of (1R,3S)-diastereomers into their (1S,3S)-counterparts by scission of the C(1)-N(2) bond

The Pictet-Spengler cyclization of the imines (3) prepared by the condensation of L-tryptophan methyl ester (1) and aryl methyl ketones (2), using titanium(IV) isopropoxide as an iminating reagent, quantitatively proceeded, when treated with trifluoroacetic acid (TFA) or formic acid, to provide two diastereomers, that is (1S,3S)-1-aryl-3-isopropoxycarbonyl-1-methyl-1,2,3,4-tetrahydro-beta-carbolines (4) and their (1R,3S)-diastereomers (5), of which the diastereomer ratios varied from 1 to 5 depending on the reaction conditions. The (1R,3S)-diastereomers (5) are thermodynamically more stable than their (1S,3S)-congeners (4), as shown by equilibration experiments in TFA. The conversion of 4 to 5 (also 5 to 4) should occur under acidic conditions by cleavage of the C(1)-N(2) bond with complete retention of configuration at the C-3 chiral center. The low diastereo-selectivity observed in the Pictet-Spengler reaction of 1 and 2 is concluded to be a stereochemical outcome under conditions of kinetic control (lower temperature, shorter reaction time), while the high diastereo selectivity with preferential formation of the more stable isomer (5) is the result of thermodynamically controlled experiments (higher temperature, longer reaction time).     

Novel and efficient method for esterification, amidation between carboxylic acids and equimolar amounts of alcohols, and amines utilizing Me2NSO2Cl and N,N-dimethylamines; its application to the synthesis of coumaperine, a natural chemopreventive dieneamide

Various carboxylic esters or amides were prepared in good to excellent yield between carboxylic acids and equimolar amounts of alcohols or amines under very mild conditions (0-45°C; within 3 h) using dimethylsulfamoyl chloride (Me₂NSO₂Cl; 1) combined with N,N-dimethylamines (Me₂NR: 2a; R=Me, 2b; R=Bu). The choice of the sulfamoyl chloride and the amine is crucial for the reaction; that is, sterically uncrowded amines accelerated the present esterification and amidation. This agent had some advantages over methanesulfonyl chloride (3)/amines as for the atom-economy, avoidance of side reactions, and had very high chemoselectivity toward the carboxyl group vs the hydroxyl group; the experiment was performed by the addition of 1 to the mixture of carboxylic acids and alcohols. Application of this method to the synthesis of coumaperine, a chemopreventive natural product, was performed using the present amidation as a key step.     

Stereoblock poly(lactic acid): synthesis via solid-state polycondensation of a stereocomplexed mixture of poly(L-lactic acid) and poly(D-lactic acid)

Stereoblock poly(lactic acid) consisting of D- and L-lactate stereosequences can be successfully synthesized by solid-state polycondensation of a 1:1 mixture of poly(L-lactic acid) and poly(D-lactic acid). In the first step, melt-polycondensation of L- and D-lactic acids is conducted to synthesize poly(L-lactic acid) and poly(D-lactic acid) with a medium-molecular-weight, respectively. In the next step, these poly(L-lactic acid) and poly(D-lactic acid) are melt-blended in 1:1 ratio to allow formation of their stereocomplex. In the last step, this melt-blend is subjected to solid-state polycondensation at temperature where the dehydrative condensation is allowed to promote chain extension in the amorphous phase with the stereocomplex crystals preserved. Finally, stereoblock poly(lactic acid) having high-molecular-weight is obtained. The stereoblock poly(lactic acid) synthesized by this way shows a higher melting temperature in consequence of the controlled block lengths and the resulting higher-molecular-weight. The product characterization as well as the optimization of the polymerization conditions is described. Changes in M(w) of stereoblock poly(lactic acid) (sb-PLA) as a function of the reaction time.     

Capacity and quantum mechanical tunneling

We connect the notion of capacity of sets in the theory of symmetric Markov process and Dirichlet forms with the notion of tunneling through the boundary of sets in quantum mechanics. In particular we show that for diffusion processes the notion appropriate to a boundary without tunneling is more refined than simply capacity zero. We also discuss several examples in ^d .     

Approaches to dioxin analysis by HRGC-HRMS and hybrid HRGC-MS-MS

A hybrid mass spectrometer with an EBQQ configuration was used to investigate two approaches to trace dioxin analysis: high resolution gas chromatography – high resolution mass spectrometry (HRGC-HRMS) and high resolution gas chromatography – mass spectrometry – mass spectrometry (HRGC-MS-MS). It is shown that selected ion monitoring (SIM) HRGC-HRMS exhibits better selectivity for dioxins separated on a cyanopropyl column than is otherwise obtained under medium resolution mass spectrometry (3,000 resolution), while optimization of conditions for HRGC-MS-MS allowed the observation of 350 femtograms of the highly toxic 2,3,7,8-TCDF at a S/N ratio of 5:1. Both methods were applied to environmental samples with good results.