Electrolytic reduction of Tc(VII) in nitric acid solution using glassy carbon electrode

Electroreduction of Tc(VII) was studied in nitric acid solution using glassy carbon electrode. The electroreduction was conducted at a constant potential –300 mV (vs. Ag/AgCl) with a potentiostat. It was found that the difference of the Tc concentration in the solutions before and after the electrolysis was negligibly small. This means that there were almost no TcO₂ or Tc deposited on the carbon fiber electrode during the electroreduction. Absorption spectra and distribution coefficients obtained by ion-exchange analysis indicated that Tc(VII) was reduced to Tc(IV).This work was financed by the Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT) under the framework of The Development of Innovative Nuclear Technologies.     

Synthesis,Redox Properties,and Electronic Spectra of Sterically Crowded Triarylphosphines Conjugated with Electron Acceptors

Abstract

Synthesis, redox properties, and electronic spectra of the sterically crowded triarylphosphines conjugated with π-electron systems, especially electron acceptors such as carbonyl group, are briefly reviewed. The sterically crowded triarylphosphines conjugated with various π-electron systems were synthesized from the common synthetic intermediate, (bromoaryl)phosphine, by conventional manner. The sterically crowded triarylphosphines conjugated with the electron acceptors exhibit visible absorption and fluorescence with large Stokes shift. Large solvent effect, redshift in polar solvent, and good correlation with the difference of the oxidation potential of the phosphine moiety and the reduction potential of the acceptor moiety suggest polar excited state resulting from HOMO-LUMO transition.     

Synthesis of monodispersed silica nanoparticles with high concentration by the Stöber process

Silica nanoparticles with high concentration were prepared by the sol–gel process based on the Stöber method using tetraethoxysilane as a starting material. It was found that silica sol with about 4 wt% in concentration and with a diameter of about 10 nm was obtained by controlling the reaction conditions in the Stöber process. By removing the solvent under a reduced pressure, the particle concentration was increased up to 15 wt% without aggregation.     

Polymerization of Acrolein by Imidazole

Polymerization of acrolein(AL) in the presence of imidazole(Im) has been investigated in tetrahydrofuran or methanol below room temperature. The polymers obtained, white or pale yellow powders, were found to be composed of vinyl polymer with one Im group attached and having an aldehyde side chain, of which 70–80 mole % of the aldehyde revealed bridge structure. The number-average molecular weight (M _n) of these polymers was determined to be in the range of 317 to 691. The rate of polmerization R_p was expressed by the equation, R + k[Im] [AL]².

The addition of water or dimethyl sulfoxide accelerated the polymerization reaction, while the presence of benzaldehyde or N,N'-dimethylformamide decreased R_p. The structure of addition products in the initial polymerization step was confirmed by IR and NMR spectra, and the observations of polymerization system was carried out by UV and NMR spectra. The polymerization mechanisms were discussed on the basis of these results.     

Cubic phases of binary systems of 4′-n-tetradecyloxy-3′-nitrobiphenyl-4-carboxylic acid (ANBC-14)-n-alkane

The phase behaviour of the binary systems 4′- ⁿ -tetradecyloxy-3′-nitrobiphenyl-4-carboxylic acid (ANBC-14)- ⁿ -alkane ( ⁿ -tetradecane or ⁿ -hexadecane) was investigated by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. The phase behaviour was a function of temperature ( ^T ) and the effective carbon number of the system ( ^n*), where ^n* involves carbon atoms both from the alkoxy group of ANBC-14 and from the ⁿ -alkane added. ANBC-14 shows no cubic phase, but the addition of ⁿ -alkane induced cubic phases when ^n*≧c. 15. An interesting point is that the type of cubic phase is ^Ia 3 ^d for 15^≦n*≦17, while an ^Im 3 ^m type is formed for 18^≦n*≦20. Furthermore, for ^n* = 22, two types of cubic phase, one with ^Im 3 ^m symmetry in the low temperature region and the other with ^Ia 3 ^d in the high temperature region, were observed both on heating and cooling. The phase diagram with respect to ^T and ^n* is very similar to that of pure one-component ANBC- ⁿ , which is a function of ^T and the number of carbon atoms in the alkoxy group ⁿ .     

Water polarizability in condensed phase: ab initio evaluation by cluster approach

The polarizability of a water molecule in liquid is evaluated via ab initio and density functional calculations for water clusters. This work has considerably improved our previous effort [J Chem Phys 1999, 110, 11987] to attain quantitative accuracy for polarizability. The calculations revealed that the water polarizability in the liquid is reduced from that in the gaseous phase by 7-9%. These results suggest significant implications for polarizable water models.     

Synthesis and two-electron redox behavior of diazuleno[2,1-a:1,2-c]naphthalenes

The Diels-Alder reaction of di-2-azulenylacetylene with tetraphenylcyclopentadienone afforded 7,8,9,10-tetraphenyldiazuleno[2,1-a:1,2-c]naphthalene in one pot via autoxidation of the presumed 1,2-di-2-azulenylbenzene derivative. In contrast, a similar reaction of bis(1-methoxycarbonyl-2-azulenyl)acetylene with tetraphenylcyclopentadienone gave the 1,2-di-2-azulenylbenzene derivative. The following cyclodehydrogenation reaction of the benzene derivative with iron(III) chloride afforded diazuleno[2,1-a:1,2-c]naphthalene 6,11-bismethoxycarbonyl derivative. The redox behavior of these novel diazuleno[2,1-a:1,2-c]naphthalenes was examined by cyclic voltammetry (CV). These compounds exhibited two-step oxidation waves at +0.22 to +0.71 V upon CV, which revealed the formation of a radical cation and dication stabilized by the fused two azulene rings under the electrochemical oxidation conditions. Since the 1,2-di-2-azulenylbenzene derivative was oxidized at higher oxidation potentials (+0.83 and +1.86 V), the fusion of the two azulene rings to naphthalene increased electron-donating properties because of the formation of a closed-shell dicationic structure. Formation of the radical cation was characterized by UV-vis spectroscopy under the electrochemical oxidation conditions, although no evidence was obtained for the presumed dication under the conditions of the UV-vis spectroscopy measurement.     

A mediator-type biosensor as a new approach to biochemical oxygen demand estimation

A novel biosensor for the determination of biochemical oxygen demand (BOD) was developed using potassium hexacyanoferrate(III) [HCF(III)] as a mediator. The sensor element consists of a three-electrode system, with both working and counter electrodes compactly integrated as a disposable using etching and electroplating processes. Pseudomonas fluorescens biovar V (isolated from a wastewater treatment plant) was immobilized on the surface of the working electrode using poly(vinyl alcohol)-quaternized stilbazol (PVA-SbQ) photopolymer gel. Synthetic wastewater described by the Organization for Economic Cooperation and Development (OECD) was used as a standard solution instead of glucose-glutamic acid synthetic wastewater. The conditions of amperometric measurement were optimized at +600 mV (vs. Ag/AgCl) operating potential, namely 40 mM HCF(III) in a 0.1 M phosphate buffer (pH 7.0) at 20 degrees C. The sensor response was linear from 15 up to 200 mg O l-1 BOD. The response time was 15 min at 200 mg O l-1 BOD. To demonstrate the wide metabolic range of activity of the sensor, the sensor response to 14 substances in four categories of organic compounds was investigated. Further, it was shown that the response of this BOD sensor was not influenced in samples with low concentrations of dissolved oxygen under the measuring conditions used. For real wastewaters, the BOD values were determined using the sensor and compared favorably with those determined by the conventional BOD5 method.     

Influence of nuclear reactor accident at Chernobyl' on the environmental radioactivity in Toyama

The environmental radioactivity caused by the reactor accident at Chernobyl' was investigated from May 7 to May 31 of 1986 in Toyama. Measurement of radioactivities in airborne particles, rain water, drinking water, milk, and mugwort are carried out by gamma-ray spectrometry (pure Ge detector; ORTEC GMX-23195). Ten different nuclides (103Ru, 106Ru, 131I, 132Te-I, 134Cs, 136Cs, 137Cs, 140Ba-La) are identified from samples of airborne particles. In the air samples, a maximum radioactivity concentration of each nuclide is observed on 13th May 1986. The time of the reactor shut-down and the flux of thermal neutron at the reactor were calculated from 131I/132I and 137Cs/134Cs ratio. The exposure dose in Toyama by this accident is given as follows: internal exposure; [thyroid] adult-59 microSv, child-140 microSv, baby-130 microSv, [total body] adult-0.2 microSv, child, baby-0.4 microSv, external exposure; 7 microSv, effective dose equivalent; adult-9 microSv, child-12 Sv, baby-11 microSv.