Surface plasmon resonance sensor for lysozyme based on molecularly imprinted thin films

Molecularly imprinted polymers (MIPs) selective for lysozyme were prepared on SPR sensor chips by radical co-polymerization with acrylic acid and N,N′-methylenebisacrylamide. Gold-coated SPR sensor chips were modified with N,N′-bis(acryloyl)cystamine, on which MIP thin films were covalently conjugated. The presence of NaCl during the polymerization and the re-binding tests affected the selectivity and the optimization of NaCl concentration in the pre-polymerization mixture and the re-binding buffer could enhance the selectivity in the target protein sensing. When the lysozyme-imprinted polymer thin films were prepared in the presence of 40 mM NaCl, the selectivity factor (target protein bound/reference protein bound) of MIP in the re-binding buffer containing 20 mM NaCl was 9.8, meanwhile, that of MIP in the re-binding buffer without NaCl was 1.2. A combination of SPR sensing technology with protein-imprinted thin films is a promising tool for the construction of selective protein sensors.     

Stereoselective Synthesis of the Proposed C79–C104 Fragment of Symbiodinolide

Stereoselective and streamlined synthesis of the proposed C79–C104 fragment 2 of symbiodinolide ( 1 ), a polyol marine natural product with a molecular weight of 2860, was achieved. In the synthetic route, the proposed C79–C104 fragment 2 was synthesized by utilizing a Julia–Kocienski olefination and subsequent Sharpless asymmetric dihydroxylation as key transformations in a convergent manner. Detailed comparison of the ¹³C NMR chemical shifts between the natural product and the synthetic C79–C104 fragment 2 revealed that the stereostructure at the C91–C99 carbon chain moiety of symbiodinolide ( 1 ) should be reinvestigated.     

Stereodivergent Synthesis and Stereochemical Reassignment of the C79–C104 Fragment of Symbiodinolide

We have synthesized eight possible diastereoisomers 3 a – h of the C79–C97 fragment of symbiodinolide ( 1 ) in a stereodivergent manner by utilizing a dithiane addition to the aldehyde as a key step. Comparison of the ¹³C NMR chemical shifts of the natural product 1 and the synthetic products 3 a – h indicated that the relative stereostructure of this fragment in symbiodinolide ( 1 ) is that represented in 3 a or f . We have stereodivergently synthesized eight possible diastereoisomers of the C94–C104 fragment 4 a – h , and we have compared their ¹³C NMR chemical shifts with those of the natural product, which established the relative stereochemistry of this fragment to be that described in diastereoisomers 4 a or e . By combining the stereostructural outcomes of the C79–C97 and C94–C104 fragments, we have proposed four candidate compounds of the C79–C104 fragment 2 a – d . We also synthesized diastereoisomers 2 a and b ( 2 a in the preceding article; Chem. Eur. J. 2015 , DOI: 10.1002/chem.201503880) by a Julia–Kocienski olefination and diastereoisomers 2 c and d by a Wittig reaction. By comparing the ¹³C NMR chemical shifts of natural symbiodinolide ( 1 ) with those of the synthetic products 2 a – d , we have reassigned the stereostructure of the C79–C104 fragment of natural product 1 to be that depicted in diastereoisomer 2 b .     

Unique molecular orientation in a smectic liquid crystalline polymer film attained by surface-initiated graft polymerization

Liquid crystalline (LC) polymer brushes containing a mesogenic azobenzene (Az) moiety are synthesized on a quartz or silicon substrate by surface-initiated atom transfer radical polymerization. The molecular orientation of the Az units and the LC properties in the grafted chains are evaluated by UV-vis spectroscopy, polarized optical microscopy, and grazing incidence X-ray diffraction measurements. The Az side chains of the grafted chains exhibited a smectic LC phase in which the smectic layers are oriented perpendicular to the substrate with a parallel orientation of the mesogens. In contrast, a spincast film of the identical LC polymer without grafting to the surface shows layer structures parallel to the substrate. A drastic effect of tethering one end to the substrate on the LC orientation is demonstrated.     

Syntheses, crystal and solution structures, ligand-exchange, and ligand-coupling reactions of mixed pentaarylantimony compounds

All possible combinations of mixed pentaarylantimony compounds bearing p-methylphenyl and p-trifluoromethylphenyl groups were synthesized; ArnTol5-nSb (n=0-5: Ar=p-CF3C6H4, Tol=p-CH3C6H4): Tol5Sb (1), ArTol4Sb (2), Ar2Tol3Sb (3), Ar3Tol2Sb (4), Ar4TolSb (5), and Ar5Sb (6). Compounds 2-5 are the first well-characterized examples of mixed acyclic pentaarylantimony species. The structures of 2-6 were determined by X-ray crystallography to feature trigonal-bipyramidal (TBP) geometry with the more electronegative p-trifluoromethylphenyl substituents selectively occupying the apical positions. Consideration of the chemical shifts of the ipso carbons of the aryl and tolyl groups suggested that the solution structures of 1-6 were also TBP, although their pseudorotation could not be frozen even at -80 degrees C. Ligand-exchange reactions (LERs) took place between 1 and 6 at approximately 60 degrees C in [D6]benzene and all six species 1-6 were found in the equilibrium mixture. The relative stabilities of 1-6 were determined quantitatively by comparison of the observed molar ratios of 1-6 in equilibrium with calculated statistical molar ratios, and Ar2Tol3Sb (3) was found to be the most stable. The ligand-coupling reactions (LCRs) of 2-5 in solution were greatly accelerated by adding Cu(acac)2 or Li+TFPB- (TFPB: [3,5-(CF3)2 C6H3]4 B), whereby the rate becomes comparable to the LER. The use of flash vacuum thermolysis (FVT) allowed the LCR to occur with very little ligand-exchange; the exception ArTol4Sb had very fast ligand-exchange. The selectivities of the LCRs were calculated from the yield of the biaryls synthesized by using FVT. These results were highly consistent with reactions catalyzed in solution, in which bitolyl was not obtained at all. The experimental results suggested that the LCR of pentaarylantimony compounds proceeds in the manner of apical-apical coupling.     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Laser spectroscopic investigation of salicylic acids hydrogen bonded with water in supersonic jets: Microsolvation effects for excited state proton dislocation

Geometric structures and excited-state proton dislocation of size-selected salicylic acid clusters (salicylic acid and 5-methoxysalicylic acid) with water were studied by using laser spectroscopic techniques. Fluorescence excitation, dispersed fluorescence, and infrared (IR) spectra of those clusters in supersonic jets were examined for both the electronic ground (S0) and first excited (S1) states. The geometric structures of the clusters were determined on the basis of the IR spectra of the OH stretch region with the help of quantum chemical calculations. The hydroxyl group of the water moiety in the clusters forms a ring involving the carboxylic group of the salicylic acid moiety. The IR spectra in S0 show that the intramolecular hydrogen bond in the salicylic acid moiety is still held upon cluster formation, but the phenolic OH stretch band intensity is remarkably weaken in the clusters. The IR spectra in the S1 state and dispersed fluorescence spectra indicated that the intramolecular excited state proton dislocation is hardly affected by the microsolvation with water, in contrast with the strong suppression of the dislocation in the self-solvation.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.     

Triply Linked Corrole Dimers

The oxidation of 10–10′ singly linked corrole dimers with DDQ at low concentration in CHCl₃ afforded meso–meso, β–β, β–β triply linked 2H‐corrole dimers (with two inner NH groups in each corrole unit), which exhibited characteristic ¹H NMR and absorption spectra attributable to their nonaromatic electronic networks. These 2H‐corrole dimers were reduced with NaBH₄ to aromatic 3H‐corrole dimers, which were unstable and easily oxidized back to the 2H‐corrole dimers upon exposure to air. Bis(zinc(II)) complexes of the 2H‐corrole dimers were synthesized and characterized as rare examples of nonaromatic zinc(II) corrole complexes.