Protonic Conduction and O-H Bonding State in Phosphate Glasses

Abstract

Protons in alkaline-earth phosphate glasses give much higher mobility than those in silicate glasses. This is caused by the difference in O-H bonding state. Protons in P-OH form a strong hydrogen bonding with oxygen anion, resulting in formation of weak O-H bond.

The electrical conductivity of the glasses is proportional to the square of the proton concentration. The activation energy for the conduction is related to ν_OH, peak wavenumber of infrared absorption band (around～3000 cm^?1), due to fundamental O-H stretching vibration. The mobility of protons increases with decreasing ν_OH, which depends on the species of ions included in the phosphate glasses.     

Thermal and optical properties of highly fluorinated copolymers of methacrylates

Copolymers of pentafluorophenylhexafluoroisopropyl methacrylate (FPPMA) with trifluoroethyl methacrylate (TFEMA) were prepared in THF solution and in bulk using azobisisobutyronitrile as a free radical initiator. The monomer reactivity ratios of TFEMA (M₁) and FPPMA (M₂) were calculated as r₁ = 0.55 and r₂ = 0.07. The refractive indices of poly(TFEMA) and poly(FPPMA) are very similar as 1.435 and 1.430, respectively, at 532 nm, and the copolymer films were transparent. The glass transition temperatures (T_g) of the copolymers were in the range of 80–90°C and showed a negative deviation from the Gordon–Taylor equation. The thermal decomposition temperature (T_d) was increased with the content of FPPMA in copolymers. Low water absorption for 1:1 FPPMA/TFEMA copolymer was detected. Copolymers of FPPMA with hexafluoroisopropyl methacrylate (HFPMA) were also prepared. The monomer reactivity ratios of HFPMA (M₁) and FPPMA (M₂) were calculated as r₁ = 0.43 and r₂ = 0.10. The T_gs of the copolymers were in the range of 88–95°C and showed also a negative deviation from the Gordon–Taylor equation. T_g and T_d of the copolymers were increased with the content of FPPMA. The refractive index of poly(HFPMA) (1.384 at 532 nm) is much lower than that of FPPMA homopolymer, but copolymer films obtained were clear and transparent. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and Polymerization of (S)-4-Methyl-2-N,N-dimethylaminopentyl Methacrylate

(S)-4-Methyl-2-N,N-dimethylaminopentyl methacrylate (DMAPM) was synthesized from the reaction of N,N-dimethyl-L-leucinol with methacryl chloride, and its radical polymerization was investigated. It was found that DMAPM readily polymerized by α,α¹-azobisisobutyronitrile (AIBN) as an initiator to give poly-DMAPM. The copolymerization of DMAPM(M₁) with styrene(Mz) was also studied in various solvents with AIBN as an initiator at 60°C. From the result obtained in benzene, Q and e values of DMAPM were determined to be 0.64 and -0.04, respectively. Specific rotations of the copolymers of DMAPM with styrene were not proportional to the weight percent of the DMAPM unit incorporated, but the observed relation gave a downward curve. The copolymerizations DMAPM with α, β-disubstituted monomers such as maleic acid, maleimide, and N-phenylmaleimide were carried out in order to induce asymmetric center in the polymer chain. After hydrolysis of the copolymers obtained, the hydrolyzed polymers were found to be optically active, suggesting an induction of asymmetric center into the polymer chain.     

Sulfur-Containing Vinyl Monomers. XV. Kinetic Study of Radical Polymerization of Vinyl Mercaptobenzothiazole and Its Copolymerization

A kinetic study of radical polymerization of vinyl mercaptobenzothiazole (VMBT) with α,α′-azobisisobutyonitrile (AIBN) at 60°C was carried out. The rate of polymerization (R_p) was found to be expressed by the rate equation: R_p = k[AIBN]^0.5 [VMBT]^1.0, indicating that the polymerization of this monomer proceeds via an ordinary radical mechanism. The apparent activation energy for overall polymerization was calculated to be 20.9 kcal/mole. Moreover, this monomer was copolymerized with methyl methacrylate, acrylonitrile, vinyl acetate, phenyl vinyl sulfide, maleic anhydride, and fumaronitrile at 60°C. From the results obtained, the copolymerization parameters were determined and discussed.     

Kinetic Study of 1-β-Cyanoethyl Aziridine for Ring-Opening Polymerization Initiated with Alkyl Sulfate

The kinetics of the cationic polymerization of 1-β-cyanoethyl aziridine initiated 3-hydroxy- 1-propane sulfonic acid sultone and methyl tosylate have been studied. The course of polymerization involved the propagation stage and termination reaction due to the reaction between the growing chain and imino groups in the polymer chain. The propagation constants and termination constants were obtained. The enthalpies of activation for the propagation and termination reactions are ΔH_p? = 12.9 kcal/mol and ΔH_t? = 12.4 kcal/mol, and the entropies of activation are ΔS_p? = -31 cal/deg·mol and ΔS_t? = -39 cal/deg·mol. Otherwise, the polymerization initiated with methyl tosylate involved an early stage which was initiated very quickly.     

Hydrooligomerization of Butadiene with Nickel Complex Catalyst

Abstract

Oligomerization of butadiene with the catalyst system of nickel(II)chloride, electron donor, and lithium aluminum hydride or sodium borohydride has been studied. Most oligomers obtained with this catalyst were linear, and dihydrogenated dimers, trimers, and tetramers. They were n-octa-1,6-diene, n-octa-1,7-diene, n-dodeca-1,6,10-triene, and n-hexadeca-1,6,10,14-tetraene, which were identified by means of infrared, nuclear magnetic resonance, and mass spectrometry. Yields of each oligomer were strongly affected by the nature of the electron donors used. The hydrogen required for the formation of the hydrooligomers was assumed to originate from the lithium aluminum hydride or sodium borohydride used as a reducing agent. A proposed mechanism for the hydrooligomerization is that butadiene is oligomerized on the nickel atom, and the produced oligoolefins, bonded to the nickel by two terminal π-allylic bonds, are dihydrogenated to linear hydrooligomers.     

Opening and Addition Modes in Propagation During Radical Polymerization of Fumaric and Maleic Derivatives

Abstract

Polymers of bis(trimethylsilyl) fumarate, di-tert-amyl fumarate, and methyl tert-amyl fumarate were prepared by radical polymerization at 60 or 120°C. The polymers were converted into poly(dimethyl fumarate) via thermolysis or hydrolysis and subsequent methylation to determine the tacticity using ¹³C-NMR spectroscopy. The probabilities of meso addition (P _m) were revealed to be 0.66 (60°C) for the bis(trimethylsilyl) ester, 0.60 (60°C) and 0.52 (120°C) for the di-tert-amyl ester, and 0.54 (60 and 120°C) for the methyl tert-amyl ester. From the temperature dependence of the P _m values, the differences in activation enthalpies and entropies for the meso and racemo additions were evaluated. The microstructure of poly(dimethyl fumarate) derived from poly(maleic anhydride) was also examined. The opening and addition modes in propagation of the fumaric and maleic derivatives were discussed based on the results obtained in the present and previous work.     

The Polymerization of 1,3-Dioxolane Catalyzed by Ion Exchange Resin (Polystyrene Sulfonic Acid)

Polystyrene sulfonic acid resin (Amberlyst 15) was found to initiate the cationic polymerization of 1,3-dioxolane easily in bulk at 0 to 50° C, and polymers with a reduced viscosity of 0.1 were obtained. However, this resin showed only low initiator activity for the polymerizations of 2-methyl-1, 3-dioxolane and trioxane.     

Effects of Bis(aromatic) Pendants on Recognition of Nucleobase Thymine by Zn2+ -1,4,7,10-tetraazacyclododecane (Zn2+ -cyclen)

We have previously shown that the nucleobase thymine binding to Zn²⁺ -cyclen (cyclen=1,4,7,10-tetraazacyclododecane) complex became stronger by appending acridine, naphthalene, or quinoline rings to the cyclen. Amongst these, the pendant bis((1-naphthyl)methyl) or bis((4-quinolyl)methyl) groups yielded the most effective thymine-recognizing Zn²⁺ -cyclen complexes [J. Am. Chem. Soc., 121 (1999) 5426]. The present study was undertaken to find causes of the bis(aromatic) ring effect by X-ray crystal structure analysis and NMR studies. The crystal structure of the Zn²⁺ -bis((1-naphthyl)methyl)-cyclen complex with a deprotonated 1-methylthymine (1-MeT) failed to show the anticipated evidence for the double ~ - ~ stacking interactions between the two naphthalenes and the Zn 2+ -bound 1-MeT m (1-MeT m =N(3')-deprotonated 1-MeT). Crystal data: formula C₃₆ H₄₇ N₇ O₇ Zn, M r =755.19, monoclinic, space group P2₁/ c (No. 14), a =15.438(2) Å, b =14.093(3) Å, c =16.726(2) Å, g =90.53(1) V =3638.7(8) Å 3 Z =4, R =0.035, R _w =0.049. However, the ¹H NMR studies of Zn²⁼ -bis((4-quinolyl)methyl)-cyclen with 1-MeT in varying H₂O/CH₃ CN solution showed increasing upfield shifts of Me(5') and H(6') of the Zn²⁺ -bound 1-MeT in more aqueous media, indicating that the double intercalation with the two quinolines became more significant in more protic environments. We conclude that the double ~ - ~ stacking effect accounts for the enhanced recognition of thymine base by the appended bis((1-naphthyl)methyl) or bis((4-quinolinyl)methyl) groups.