A video camera system for coaxial observation of a sample with an incident soft X‐ray beam

A video camera system for observing a sample from the direction of an incident soft X‐ray beam has been developed. The sample is seen via two reflecting mirrors. The first mirror, which has a hole to allow the soft X‐ray beam to pass through, is set on the beam axis in a vacuum. The second mirror is used to cancel out the mirror inversion of the image. This camera system is used for efficient positioning of samples in a soft X‐ray beam.     

Study on the single crystal growth of concentration gradient Ce:YAP rod and the dopant concentration dependence on the scintillation properties

Micro-pulling down (μ-PD) method allows to prepare single crystals quickly and relatively inexpensively. Since it is a melt growth and taking into account segregation phenomena, the μ-PD method allows also to obtain single crystals characterized by dopant concentration gradients. Especially, taking the advantage of the grown crystal high aspect ratio, it allows to prepare crystalline samples with variable and wide range concentrations of dopants. These samples can help in understanding the correlation between dopant concentration and luminescence properties.     

Visible nonlinear band-edge luminescence in ZnSe and CdS excited by a mid-infrared free-electron laser

Visible nonlinear band-edge luminescence in ZnSe and CdS bulk crystals was observed upon excitation by a mid-infrared free-electron laser (mid-IR FEL) at approximately 9 mm. The emission intensity is proportional to the 74th and 45th powers of the excitation intensity for ZnSe and CdS, respectively. For ZnSe, the temporal profile of the emission intensity does not follow the profile of the excitation macropulse of the FEL, but sharply rises and decays only at the maximum of the macropulse profile. These features are in marked contrast to those of a previous report, where the emission profile follows that of the macropulse, and the emission intensity scales with the 4th power of the excitation intensity. The experimental observations were reproduced by a numerical simulation based on impact ionization and avalanche ionization by electrons accelerated by the optical electric field of the FEL. The large nonlinearity in the bandedge emission comes from the macropulse temporal structure, which consists of micropulses densely spaced to allow excited carriers to survive when the next micropulse arrives. They work as seed carriers in the next carrier multiplication step.     

Kinetic Study of 1-β-Cyanoethyl Aziridine for Ring-Opening Polymerization Initiated with Alkyl Sulfate

The kinetics of the cationic polymerization of 1-β-cyanoethyl aziridine initiated 3-hydroxy- 1-propane sulfonic acid sultone and methyl tosylate have been studied. The course of polymerization involved the propagation stage and termination reaction due to the reaction between the growing chain and imino groups in the polymer chain. The propagation constants and termination constants were obtained. The enthalpies of activation for the propagation and termination reactions are ΔH_p? = 12.9 kcal/mol and ΔH_t? = 12.4 kcal/mol, and the entropies of activation are ΔS_p? = -31 cal/deg·mol and ΔS_t? = -39 cal/deg·mol. Otherwise, the polymerization initiated with methyl tosylate involved an early stage which was initiated very quickly.     

Hydrooligomerization of Butadiene with Nickel Complex Catalyst

Abstract

Oligomerization of butadiene with the catalyst system of nickel(II)chloride, electron donor, and lithium aluminum hydride or sodium borohydride has been studied. Most oligomers obtained with this catalyst were linear, and dihydrogenated dimers, trimers, and tetramers. They were n-octa-1,6-diene, n-octa-1,7-diene, n-dodeca-1,6,10-triene, and n-hexadeca-1,6,10,14-tetraene, which were identified by means of infrared, nuclear magnetic resonance, and mass spectrometry. Yields of each oligomer were strongly affected by the nature of the electron donors used. The hydrogen required for the formation of the hydrooligomers was assumed to originate from the lithium aluminum hydride or sodium borohydride used as a reducing agent. A proposed mechanism for the hydrooligomerization is that butadiene is oligomerized on the nickel atom, and the produced oligoolefins, bonded to the nickel by two terminal π-allylic bonds, are dihydrogenated to linear hydrooligomers.     

Opening and Addition Modes in Propagation During Radical Polymerization of Fumaric and Maleic Derivatives

Abstract

Polymers of bis(trimethylsilyl) fumarate, di-tert-amyl fumarate, and methyl tert-amyl fumarate were prepared by radical polymerization at 60 or 120°C. The polymers were converted into poly(dimethyl fumarate) via thermolysis or hydrolysis and subsequent methylation to determine the tacticity using ¹³C-NMR spectroscopy. The probabilities of meso addition (P _m) were revealed to be 0.66 (60°C) for the bis(trimethylsilyl) ester, 0.60 (60°C) and 0.52 (120°C) for the di-tert-amyl ester, and 0.54 (60 and 120°C) for the methyl tert-amyl ester. From the temperature dependence of the P _m values, the differences in activation enthalpies and entropies for the meso and racemo additions were evaluated. The microstructure of poly(dimethyl fumarate) derived from poly(maleic anhydride) was also examined. The opening and addition modes in propagation of the fumaric and maleic derivatives were discussed based on the results obtained in the present and previous work.     

Detailed mechanism of radical high polymerization of sterically hindered dialkyl fumarates

The radical polymerization kinetics and mechanism of sterically hindered dialkyl fumarates (DRF) bearing various ester alkyl groups are described comprehensively. The overall polymerization reactivity of DRF, the initiation mechanism and the reactivity of the primary radicals in the polymerizations with azo initiators, the determination of the propagation and termination rate constants by means of electron spin resonance spectroscopy, the propagation mechanism and the microstructure of the polymers, and the chain rigidity of poly(DRF) and bimolecular termination process are discussed.     

O2/n2-separation by polymer-bound cobalt complexes

Facilitated or complexation-mediated transport of oxygen in the solid membrane containing a fixed carrier was described, by using the polymer-bound cobalt Schiff's base chelate (CoS) and cobaltporphyrin (CoP). α³ β-Substituted cobaltporphyrin derivatives were synthesized: The oxygen-binding reaction to cobalt was affected by the cavity structure on porphyrin, i.e., unbulky amido-substituted groups such as acetylamido- and acrylamido-substituents enhanced oxygen-binding and -dissociation rate constant or provided an oxygen-binding pathway. Oxygen transport through the membranes of these polymer-bound CoP derivatives was selectively augmented due to the rapid and reversible oxygen-binding. Diffusion constants via the fixed CoPs correlated to the characteristics of oxygen-binding reaction.