Enrichment of surfactant from its aqueous solution using ultrasonic atomization

Dilute aqueous solutions of dodecyl-benzenesulfonic acid sodium salt (DBS-Na) and polyoxyethylenenonylphenyl ethers (PONPEs) were ultrasonically atomized. The surfactants were concentrated in collected mist droplets. The enrichment ratio increased with decreasing surfactant concentration. Depending on the surfactant’s molecular weight and affinity to water, different enrichment ratio was observed in the range of low feed concentrations. For anionic surfactant, DBS-Na, the enrichment ratio was significantly improved by KCl addition and a peak appeared on the plot of the ratio against KCl concentration. Addition of NaCl or CaCl₂ · 2H₂O to the surfactant solution also enhanced the enrichment ratio; however, the effect was relatively small. Such behaviors of the ratio were interpreted as enhanced interfacial adsorption of the surfactant and a lack of supply of surfactant monomers from liquid bulk because of slow breaking of surfactant micelles. Time required for collecting an amount of mist was also observed. Among the three salt systems, the time for KCl system was twice as long as others. This fact suggested that the formation of smaller droplets in KCl system.     

Platinum(II)-catalyzed reaction of 2-alkynylbenzoates or benzothioates with vinyl ethers: a concise method for synthesis of 1-acyl-4-alkoxy- or 1-acyl-4-alkylsulfanylnaphthalene derivatives

[reaction: see text] A concise method for the preparation of 1-acyl-4-alkoxy- or 1-acyl-4-alkylsulfanylnaphthalenes has been developed by the reaction of o-ethynylbenzoates or benzothioates with vinyl ethers, in the presence of a catalytic amount of PtCl(2). It is proposed that the reaction proceeds through [3 + 2]-cycloaddition of the platinum-containing carbonyl ylides followed by 1,2-alkyl migration.     

Oxidation of sec‐alcohols with Ru(II)‐bearing microgel star polymer catalysts via hydrogen transfer reaction: Unique microgel‐core catalysis

Oxidation of sec‐alcohols was investigated with ruthenium‐bearing microgel core star polymer catalysts [Ru(II)‐Star]. The star polymer catalysts were directly prepared via RuCl₂(PPh₃)₃‐catalyzed living radical polymerization of methyl methacrylate (MMA), followed by the arm‐linking reaction with ethylene glycol dimethacrylate ( 1 ) in the presence of diphenylphosphinostyrene ( 2 ). The Ru(II)‐Star efficiently and homogeneously catalyzed the oxidation of 1‐phenylethanol ( S1 ) to give a corresponding ketone (acetophenone) in higher yield (92%) than the analogs of polymer‐supported ruthenium complexes. Importantly, the star catalyst afforded high recycling efficiency in the oxidation. They held catalytic activity against three times catalysis even though they were recovered under air‐exposure, whereas the conventional RuCl₂(PPh₃)₃ lost the activity for same recycling procedure due to the deactivation by oxygen. The stability of the star catalysts during the recycle experiment was confirmed by detailed spectroscopic characterization. The star polymers also catalyzed oxidation for a wide range of sec‐alcohols with aromatic and aliphatic groups. The substrate affinity was different from that with RuCl₂(PPh₃)₃, suggesting the unique selectivity caused by the specific structure. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Dynamic Vapochromic Behaviors of Organic Crystals Based on the Open–Close Motions of S‐Shaped Donor–Acceptor Folding Units

The first vapochromic organic crystals are described with respect to their preparation, color change, adsorption/desorption properties, crystal structures, and color‐change mechanism. Non‐solvatochromic, 1,4,5,8‐naphthalene‐tetracarboxylic diimide (NDI) derivatives 1 a bearing two pyrrole imine (PI) tethers have been used as a motif for the crystal packing template. Red‐purple vapochromic solid 3 was prepared by evacuation of orange crystals 2 (equivalent to 1 a ?2 MeOH), obtained by recrystallization of 1 a from MeOH. Solid 3 showed high‐adsorption ability and unprecedented vapor‐dependent color changes upon exposure to a variety of organic vapors, whereas light brown amorphous solid 1 a , did not show vapo‐ or solvatochromic behavior toward any organic solvent. The strong adsorption capability of 3 was confirmed by TGA experiments and adsorption/desorption isotherms. Analysis of the solid‐state UV/Vis analysis revealed that the vapor‐dependent color changes of 3 were owed to the specific interference of solvent vapors with its broad CT absorbance at λ=450–650 nm. Packing structures of 1 a in orange crystals 2 , red‐purple solid 3 , and regenerated orange solid 2 were unequivocally established by single crystal and synchrotron powder X‐ray diffraction, respectively. Molecular structures and arrays of 1 a in these materials indicated that 1) unit 1 a had an S‐shaped folded conformation in 2 and 3 by intramolecular donor–acceptor interactions between NDI and two PI units; 2) inclusion of the guest vapor into the S‐shaped template decreased the intramolecular PI‐NDI interactions, accompanied by increasing intermolecular NDI‐NDI and PI‐PI interactions; and 3) such flexible, open–close motions of the S‐shaped template could be repeated during reversible adsorption/desorption processes without degradation of crystal packing. The adsorption properties and mechanism of molecular shape‐dependent vapochromic behavior of 3 are discussed with reference to experimental results, crystallographic data, and theoretical calculations.     

Dynamic properties of combustion instability in a lean premixed gas-turbine combustor

We experimentally investigate the dynamic behavior of the combustion instability in a lean premixed gas-turbine combustor from the viewpoint of nonlinear dynamics. A nonlinear time series analysis in combination with a surrogate data method clearly reveals that as the equivalence ratio increases, the dynamic behavior of the combustion instability undergoes a significant transition from stochastic fluctuation to periodic oscillation through low-dimensional chaotic oscillation. We also show that a nonlinear forecasting method is useful for predicting the short-term dynamic behavior of the combustion instability in a lean premixed gas-turbine combustor, which has not been addressed in the fields of combustion science and physics.     

Efficient synthesis of diborylalkenes from alkenes and diboron by a new PSiP-pincer palladium-catalyzed dehydrogenative borylation

The efficient synthesis of various diborylalkenes such as 1,1-, trans-1,2-, and cyclic 1,2-diborylalkenes from alkenes and diboron was achieved for the first time. Selective preparation of di- and monoborylalkenes was also realized by the appropriate choice of reaction conditions. The reaction was found to proceed via a new mechanism of dehydrogenative borylation through a monoborylpalladium complex bearing an anionic PSiP-pincer ligand as a key intermediate, which realized the efficient borylation without sacrificial hydroboration or hydrogenation of the alkene.     

Measurement of Reflected and Scattered Light for Monitoring Fluctuation of Structures

A laser spectroscopic technique for studying fluctuations of structural objects is presented, together with some results of our investigations including an observation of forced vibration of a refrigerator, intrinsic vibrations of buildings, and appearance of a fluctuation in rotational speed due to fatigue. An alternative detection technique which uses the scattered light for monitoring in place of the mirror-reflected beam is also presented. A leak of water out of a pipeline was detected with this method.

The results obtained with this laser spectroscopic technique should form a useful collection of data regarding fluctuation analysis of various objects.     

Pt(II)- or Au(III)-catalyzed [3+2] cycloaddition of metal-containing azomethine ylides: highly efficient synthesis of the mitosene skeleton

[reaction: see text] Only 1-3 mol % of PtCl(2) or AuBr(3) was sufficient to promote generation and [3+2] cycloaddition of transition-metal-containing azomethine ylides derived from N-(o-alkynylphenyl)imines bearing an internal alkyne moiety. A highly efficient method for the preparation of synthetically useful tricyclic indole derivatives having a substituent at the 3-position of the indole nucleus was established by this method.