A chemical model of catechol-O-methyltransferase. Methylation of 3,4-dihydroxybenzaldehyde in aqueous solution

The reaction of 3,4-dihydroxybenzaldehyde (LH2) and dimethylsulfate (DMS) to form the m- and p-O-methylated products (vanillin and isovanillin, respectively) in aqueous 2-(N-morpholino)ethane sulfonate buffer was studied kinetically. The products were determined by means of high-performance liquid chromatography. The O-methylation occurred principally at the p-hydroxyl group in the absence of divalent metal ions. In the presence of Cu(II), the m-methylation was promoted and became predominant. Zn(II) showed a similar but less pronounced effect. The effects were explained in terms of the complex formation of LH2. The second order rate constants for the m- and p-methylation of the species, LH2, CuL and CuL2-2 by DMS were calculated. The values and their ratio for the m-/p-reactions increased in the order of LH2 less than CuL less than CuL2-2. The reaction may serve as a chemical model for catechol-O-methyltransferase, which requires divalent metals and catalyzes the m-methylation.     

Optically induced mechanical interaction between semiconductor quantum dots under an electronic resonance condition

Assuming an electronic resonance condition, we study the shape-dependence of the radiation force (RF) on a semiconductor quantum dot (QD) floating in medium and the optically induced mechanical interaction (OIMI) between two QDs with Maxwell stress tensor (MST) method, where the response fields are calculated by the improved discrete dipole approximation (DDA). Main results are as follows: (1) Properties of the RF on an isolated QD drastically change due to its shape and polarization of an incident light, which can be used for shape-selective manipulation. (2) Anomalous OIMI between two QDs arises depending on the spatial structures of internal fields, which results from the interaction between polarizations in respective QDs when they are near each other.     

Training humans in non-native phoneme perception using a monkey psychoacoustic procedure

Humans were trained to categorize problem non-native phonemes using an animal psychoacoustic procedure that trains monkeys to greater than 90% correct in phoneme identification [Sinnott and Gilmore, Percept. Psychophys. 66, 1341-1350 (2004)]. This procedure uses a manual left versus right response on a lever, a continuously repeated stimulus on each trial, extensive feedback for errors in the form of a repeated correction procedure, and training until asymptotic levels of performance. Here, Japanese listeners categorized the English liquid contrast /r-l/, and English listeners categorized the Middle Eastern dental-retroflex contrast /d-D/. Consonant-vowel stimuli were constructed using four talkers and four vowels. Native listeners and phoneme contrasts familiar to all listeners were included as controls. Responses were analyzed using percent correct, response time, and vowel context effects as measures. All measures indicated nativelike Japanese perception of /r-l/ after 32 daily training sessions, but this was not the case for English perception of /d-D/. Results are related to the concept of "robust" (more easily recovered) versus "fragile" (more easily lost) phonetic contrasts [Burnham, Appl. Psycholing. 7, 207-240 (1986)].     

C‐Selective and Diastereoselective Alkyl Addition to β,γ‐Alkynyl‐α‐imino Esters with Zinc(II)ate Complexes

Since umpolung α‐imino esters contain three electrophilic centers, regioselective alkyl addition with traditional organometallic reagents has been a serious problem in the practical synthesis of versatile chiral α‐amino acid derivatives. An unusual C‐alkyl addition to α‐imino esters using a Grignard reagent (RMgX)‐derived zinc(II)ate was developed. Zinc(II)ate complexes consist of a Lewis acidic [MgX]⁺ moiety, a nucleophilic [R₃Zn]^? moiety, and 2 [MgX₂]. Therefore, the ionically separated [R₃Zn]^? selectively attacks the imino carbon atom ,which is most strongly activated by chelation of [MgX]⁺. In particular, chiral β,γ‐alkynyl‐α‐imino esters can strongly promote highly regio‐ and diastereoselective C‐alkylation because of structural considerations, and the corresponding optically active α‐quaternary amino acid derivatives are obtained within 5 minutes in high to excellent yields.     

Design and fabrication of teflon-coated tungsten nanorods for tunable hydrophobicity

The nature of water interaction with tungsten nanorods (WNRs) fabricated by the glancing-angle deposition technique (GLAD)-using RF magnetron sputtering under various Ar pressures and substrate tilting angles and then subsequent coating with Teflon-has been studied and reported. Such nanostructured surfaces have shown strong water repellency properties with apparent water contact angles (AWCA) of as high as 160°, which were found to depend strongly upon the fabrication conditions. Variations in Ar pressure and the substrate tilting angle resulted in the generation of WNRs with different surface roughness and porosity properties. A theoretical model has been proposed to predict the observed high AWCAs measured at the nanostructure interfaces. The unique pyramidal tip geometry of WNRs generated at low Ar pressure with a high oblique angle reduced the solid fraction at the water interface, explaining the high AWCA measured on such surfaces. It was also found that the top geometrical morphologies controlling the total solid fraction of the WNRs are dependent upon and controlled by both the Ar pressure and substrate tilting angle. The water repellency of the tungsten nanorods with contact angles as high as 160° suggests that these coatings have enormous potential for robust superhydrophobic and anti-icing applications in harsh environments.     

Effects of 3,4-dihydrophenyl groups in water-soluble phospholipid polymer on stable surface modification of titanium alloy

The surface of a titanium (Ti) alloy substrate was modified by a simple and quick process using a water-soluble polymer, and the effects of 3,4-dihydroxyphenyl (DHP) groups in the polymer side chain on the modification process were examined. The polymers (PMDP) composed of both 2-methacryloyloxyethyl phosphorylcholine (MPC) unit and 3,4-dihydroxyphenyl methacrylate unit were synthesized for surface anchoring. The Ti alloy substrate was coated with PMDP using an aqueous solution of the polymer. A PMDP layer with a thickness of 20 nm was formed on the Ti alloy substrate simply by dip coating for 10 s without drying. Even when the Ti alloy substrate with PMDP coating was immersed in the aqueous medium for 1 week, no change in the thickness was observed, i.e., the PMDP layer was bound to the surface very stably. Oxidation of the DHP groups reduced the stability of the polymer layer significantly. Thus, the DHP groups play a significant role in achieving stable binding. Protein was adsorbed on the Ti alloy substrate; however, this was not observed for the PMDP-coated Ti alloy substrate. In conclusion, we confirmed the effects of DHP groups in PMDP on the stability of the coating on the Ti alloy substrate. Moreover, we found that surface treatment using PMDP was simple, quick, and reliable, and thus, it has great potential for improving biofouling of Ti alloy substrates used in medical devices.     

Electrochemical-coupling layer-by-layer (ECC-LbL) assembly

Electrochemical-coupling layer-by-layer (ECC-LbL) assembly is introduced as a novel fabrication methodology for preparing layered thin films. This method allows us to covalently immobilize functional units (e.g., porphyrin, fullerene, and fluorene) into thin films having desired thicknesses and designable sequences for both homo- and heteroassemblies while ensuring efficient layer-to-layer electronic interactions. Films were prepared using a conventional electrochemical setup by a simple and inexpensive process from which various layering sequences can be obtained, and the photovoltaic functions of a prototype p/n heterojunction device were demonstrated.     

Reversible photoredox switching of porphyrin-bridged bis-2,6-di-tert-butylphenols

Porphyrin derivatives bearing 2,6-di-tert-butylphenol substituents at their 5,15-positions undergo reversible photoredox switching between porphyrin and porphodimethene states as revealed by UV-vis spectroscopy, fluorescence spectroscopy, and X-ray single-crystal analyses. Photoredox interconversion is accompanied by substantial variations in electronic absorption and fluorescence emission spectra and a change of conformation of the tetrapyrrole macrocycle from planar to roof-shaped. Oxidation proceeds only under photoillumination of a dianionic state prepared through deprotonation using fluoride anions. Conversely, photoreduction occurs in the presence of a sacrificial electron donor. Transient absorption spectroscopy and electron spin resonance spectroscopy were applied to investigate the processes in photochemical reaction, and radical intermediates were characterized. That is, photooxidation initially results in a phenol-substituent-centered radical, while the reduction process occurs via a delocalized radical state involving both the macrocycle and 5,15-substituents. Forward and reverse photochemical processes are governed by different chemical mechanisms, giving the important benefit that conversion reactions are completely isolated, leading to better separation of the end states. Furthermore, energy diagrams based on electrochemical analyses (cyclic voltammetry) were used to account for the processes occurring during the photochemical reactions. Our molecular design indicates a simple and versatile method for producing photoredox macrocyclic compounds, which should lead to a new class of advanced functional materials suitable for application in molecular devices and machines.