A theoretical (DFT, GIAO-NMR, NICS) study of the carbocations and oxidation dications from azulenes, homoazulene, benzazulenes, benzohomoazulenes, and the isomeric azulenoazulenes

Protonation of parent azulene (1), homoazulene (8), representative isomeric benzazulenes (9, 9A, and 9B), and benzohomoazulenes (10, 10A, and 10B) as well as the mono- and diprotonation of isomeric azulenoazulenes (11-16) were studied by DFT at the B3LYP/6-31G(d) level. The most likely carbocations were identified based on relative protonation energies. For comparison, complete experimental 13C NMR data were obtained for parent azulenium ion 1H+ and guaiazulenium ion 2H+ in TFA. The oxidation dications derived from benzazulenes (9, 9A, and 9B), benzohomoazulenes (10, 10A, and 10B) and azulenoazulenes (11, 16) were also investigated. For azulenoazulene dications the singlet and triplet states are both minima, but except for 11(2+) and 13(2+), the triplet states are higher in energy. Structural/geometrical changes in the carbocations were examined. GIAO-NMR, NPA charges (and changes in charges), and NICS (and delta NICS) were employed to compute the NMR chemical shifts (delta delta 13C values) in order to derive charge delocalization maps and to gauge relative aromaticitylantiaromaticity in the energetically most favored carbocations and oxidation dications. The emerging trends are discussed and compared. Creation of tropylium or homotropylium entities in the carbocations (monoprotonated) and carbodications (diprotonated) is identified as an important driving force governing the protonation outcomes. Consideration of the AM1-derived delta delta Hf values (and the DFT-derived delta delta G values) suggests that the two-electron oxidation of azulenoazulenes should be experimentally feasible. Given their antiaromatic (paratropic) character, azulenoazulene dications represent interesting targets for NMR study. GIAO-derived charge delocalization mapping allows the most likely sites for nucleophilic attack on the dications to be identified.     

Photoreactions of benzosilacyclobutenes with carbonyl compounds. SH2 reaction on SiC bond by triplet carbonyl compounds

Photoreaction of 2,3-benzo-1,1-diphenyl(or dimethyl)-1-sila-2-cyclobutene with an aldehyde or ketone results in 1:1 cycloadduct of [4+2] type, the formation of which is accountd for in terms of S_H2 process, i.e., attack of a triplet carbonyl compound on the silicon of the benzosilacyclobutene.     

Rapid racemization of chiral non-racemic sec-alcohols catalyzed by (η-C5(CH3)5)Ru complexes bearing tertiary phosphine-primary amine chelate ligands

A ternary catalyst system of Cp*RuCl(cod)-2-diphenylphosphinoethylamine-KOt-Bu (Cp*=η⁵-C₅(CH₃)₅, cod=1,5-cyclooctadiene) causes rapid racemization of chiral non-racemic sec-alcohols, which results from the reversible hydrogen transfer between sec-alcohols and ketones. Both tertiary phosphine and primary amine functionalities in the ligand are responsible for the high rate.     

Total synthesis of (+)-tubelactomicin A. 2. Synthesis of the upper-half segment and completion of the total synthesis

[reaction: see text]. We have completed the total synthesis of natural (+)-tubelactomicin A (1), a 16-membered macrolide antibiotic. This Letter presents a highly efficient synthesis of the upper-half segment (C14-C24) and the completion of the total synthesis featuring a high-yielding Stille coupling for the connection of the upper-half and lower-half segments and Mukaiyama macrolactonization for the construction of the entire structure of 1.     

Diffusion Mechanisms of Zeolite Catalysts

The diffusion mechanisms within zeolite catalysts, such as resistance to diffusion at pore mouths, configurational diffusion, adsorption-controlled diffusion, influence of co-existing molecules and pore blocking, were overviewed. Two kinds of diffusivities, the intracrystalline diffusivity and the effective diffusivity, were discussed separately to clarify the diffusion mechanism.     

A free energy calculation study of the effect of H-->F substitution on binding affinity in ligand-antibody interactions

Changes in binding affinity to catalytic antibody 6D9 of chloramphenicol phosphonate derivatives (CPDs) containing H or F were investigated by performing free energy calculations based on molecular dynamics simulations. We calculated the binding free energy, enthalpy, and entropy changes (DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS) attributable to H-->F substitution by comparing results for CPDs containing a trifluoroacetylamino group (CPD-F) or an acetylamino group (CPD-H). The calculated DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS values were -2.9, -6.3, and 3.5 kcal mol(-1) and close to experimental values observed for a series of similar ligands, chloramphenicol phosphonates with F and H (-1.4, -3.5, and 2.1 kcal mol(-1)). Therefore, CPD-F binds more strongly to 6D9 than does CPD-H. To clarify the origin of the large difference in DeltaDeltaG, we apportioned the calculated values of DeltaDeltaG and DeltaG for the associated and dissociated states into contributions from various atomic interactions. We found that the H-->F substitution increased the binding affinity mainly by decreasing the hydration free energy and not by increasing favorable interactions with the antibody. The decreased hydration free energy of the ligand was mainly due to unfavorable coulombic interactions between the trifluoroacetylamino group and solvent waters, which increased the free energy of the dissociated state (by about 3.7 kcal mol(-1)). Also, the trifluoroacetylamino group slightly increased the free energy level of the associated state (about 0.8 kcal mol(-1)) because favorable van der Waals interactions compensated for unfavorable coulombic interactions with antibody atoms. In addition, the enthalpy and entropy changes, DeltaDeltaH and -TDeltaDeltaS (computationally -6.3 and 3.5 kcal mol(-1)), originated mainly from a decrease in hydration free energy in the dissociated state. The CPD-F and CPD-H ligands had substantially different structures in the dissociated and complexed states.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Asymmetric total syntheses of (+)-mycoepoxydiene and related natural product (-)-1893A: application of one-pot ring-opening/cross/ring-closing metathesis to construct their 9-oxabicyclo[4.2.1]nona-2,4-diene skeleton

The total syntheses of (+)-mycoepoxydiene and (-)-1893A have been completed. The present synthetic strategy features the use of one-pot ring-opening/cross metathesis (ROM/CM) followed by a ring-closing metathesis (RCM) reaction, allowing for the concise construction of the 9-oxabicyclo[4.2.1]nona-2,4-diene framework from a 7-oxabicyclo[2.2.1]hept-2-ene derivative and 1,3-butadiene. The sequential metathesis product was converted into (+)-mycoepoxydiene through the oxidative rearrangement of a furfuryl alcohol to a pyranone, thereby establishing its absolute stereochemistry. From the common intermediate, a structurally related natural product (-)-1893A was also synthesized via the vinylogous aldol reaction.     

Selective chemical vapor deposition synthesis of double-wall carbon nanotubes on mesoporous silica

Double-wall carbon nanotubes (DWNTs) have been selectively synthesized over Fe/Co loaded mesoporous silica by catalytic chemical vapor deposition of alcohol. Several silica materials with desired pore diameter and morphology have been investigated for the DWNT growth. The diameter distribution and selectivity of the DWNT are found to depend on the reaction temperature, pore size, and thermal stability of the support material. A high-yield synthesis of DWNTs has been achieved at 900 degrees C over high-temperature stable mesoporous silica. The outer diameter of DWNTs is found to be in the range of 1.5-5.4 nm with a "d" spacing of 0.38 +/- 0.02 nm between inner and outer layers, which is much larger than those of multiwall carbon nanotubes.     

Liquid crystalline gel with refractive index gradient of curdlan

Curdlan dissolved in aqueous sodium hydroxide was dialyzed to aqueous calcium chloride to form a gel. Transparent and turbid concentric layers observed in the gel cross section perpendicular to the long axis of the dialysis tube were identified as liquid crystalline gels with refractive index gradient and amorphous gels, respectively. The thickness of each layer was proportional to the diameter of the dialysis tube, and the gelation proceeded in proportion to the root of time. The unique pattern formation was attributed to the change of curdlan conformation and calcium-induced cross-linking resulting from a diffusion of calcium cations and hydroxide anions through the dialysis tube. It is suggested that the orderedness of the curdlan molecules decreases by the increase of the curvature of the concentric liquid crystal layers as the layer comes toward the center of the dialysis tube.