Rapid racemization of chiral non-racemic sec-alcohols catalyzed by (η-C5(CH3)5)Ru complexes bearing tertiary phosphine-primary amine chelate ligands

A ternary catalyst system of Cp*RuCl(cod)-2-diphenylphosphinoethylamine-KOt-Bu (Cp*=η⁵-C₅(CH₃)₅, cod=1,5-cyclooctadiene) causes rapid racemization of chiral non-racemic sec-alcohols, which results from the reversible hydrogen transfer between sec-alcohols and ketones. Both tertiary phosphine and primary amine functionalities in the ligand are responsible for the high rate.     

Total synthesis of (+)-tubelactomicin A. 2. Synthesis of the upper-half segment and completion of the total synthesis

[reaction: see text]. We have completed the total synthesis of natural (+)-tubelactomicin A (1), a 16-membered macrolide antibiotic. This Letter presents a highly efficient synthesis of the upper-half segment (C14-C24) and the completion of the total synthesis featuring a high-yielding Stille coupling for the connection of the upper-half and lower-half segments and Mukaiyama macrolactonization for the construction of the entire structure of 1.     

Structure-activity relationships of a new antifungal imidazole, AFK-108, and related compounds

Fungicidal activity of widely used imidazole antifungal drugs in topical applications is not so strong in spite of their fungistatic activities against dermatophytes and pathogenic yeasts. In order to improve fungicidal activity of imidazole antifungal agents, a series of novel imidazole derivatives having a hydrophobic substituent derived from isoprenoid were synthesized. The efficacy of these compounds was evaluated with respect to direct cell-membrane damaging activity, ergosterol biosynthesis inhibition, minimum growth-inhibitory concentration (MIC) and therapeutic effect for experimental dermatophytosis of guinea pigs. Among the newly synthesized compounds, the geranyl derivative named AFK-108 (2a) showed the highest in vivo fungicidal activity with both cell membrane damaging activity and ergosterol biosynthesis inhibition in vitro.     

Measurement of hyperfine structure constants,g values and tensor polarizability of excited states of Sm I

Atomic-beam laser spectroscopy with fluorescence detection is applied to investigate the hyperfine structure (hfs), Stark and Zeeman effects of the electric dipole transitions of Sm i. The measurements are performed for the four transitions of 0 → 15650.55, 292.58 → 15650.55, 292.58 → 15567.32, and 1489.55 → 16890.59 cm^-1. The hfs constants of the upper and lower levels and the isotope shifts of the transitions are determined. The tensor polarizability of the 15650.55 cm^-1 level is found to be α₂ = -556.2 ± 11.8 kHz/(kV/cm)². Thanks to the accurate g values of the lower levels [Childs, W.J., Goodman, L.S.: Phys. Rev. A 6, 2011 (1972)], the g values of the upper levels are obtained from the observed Zeeman splittings. The values are found to be -0.115907(79), 2.22259(20) and 1.599968(51) for the 15650.55 cm^-1 .1, 15567.32 cm^-1 and 16890.59.cm^-1 levels, respectively.     

Determination of 21-hydroxycorticosteroids in human urine by high-performance liquid chromatography with fluorescence detection

A simple and sensitive high-performance liquid chromatographic method with fluorescence detection for the determination of nineteen 21-hydroxycorticosteroids is described. The corticosteroids are oxidized by cupric acetate to form the corresponding glyoxal derivatives. The derivatives are converted into fluorescent quinoxalines by reaction with 1,2-diamino-4,5-methylenedioxybenzene, a fluorogenic reagent for alpha-dicarbonyl compounds. The quinoxalines are separated within 70 min on a reversed-phase column (TSK gel ODS-120T) by stepwise elution with mixtures of methanol, acetonitrile, and 1.0 M ammonium acetate. The detection limits are 0.14-29.4 pmol at a signal-to-noise ratio of 3 in a 50-microliter injection volume. This sensitivity permits precise determination of hydrocortisone, cortisone, corticosterone, and their tetrahydro derivatives in 500 microliters of normal human urine.     

Diffusion Mechanisms of Zeolite Catalysts

The diffusion mechanisms within zeolite catalysts, such as resistance to diffusion at pore mouths, configurational diffusion, adsorption-controlled diffusion, influence of co-existing molecules and pore blocking, were overviewed. Two kinds of diffusivities, the intracrystalline diffusivity and the effective diffusivity, were discussed separately to clarify the diffusion mechanism.     

Metal Ion Guest Responsive Benzoxazine Dimers and Inclusion Phenomena of Cyclic Derivatives

This study was carried out with the aim to optimize the dissolution propertiesof diclofenac (DIC) – a non-steroidal anti-inflammatory drug sparingly solublein water – through association -with -cyclodextrin (CD). Theeffect of CD on the aqueous solubility of DIC was evaluated by thephase solubility method. The amount of DIC dissolved increased linearly withthe addition of CD according to an AL type plot and without precipitationof the complex. The apparent stability constant of the complex, calculated supposinga 1:1 stoichiometry, was 295 M^-1; this value was confirmed by circulardichroism analysis. DIC/CD interactions were also studied in water by¹H and ¹³C NMR spectroscopy. Equimolar DIC/CD solid systems were prepared by physical-mixing, kneading, co-evaporation andfreeze-drying, and their properties in the solid state studied by DifferentialScanning Calorimetry, X-ray powder diffractometry and Fourier-TransformInfrared analysis. For sake of comparison, the mixture of DIC and CDseparately lyophilized was investigated too. The results demonstrated that thefreeze-dried product had the highest degree of amorphization and they were inagreement with the existence of an inclusion complex in the solid state. Thedissolution profiles of the drug from each solid system were affected by its physico-chemical properties, the freeze-dried being the most rapidly dissolvingforms.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Asymmetric total syntheses of (+)-mycoepoxydiene and related natural product (-)-1893A: application of one-pot ring-opening/cross/ring-closing metathesis to construct their 9-oxabicyclo[4.2.1]nona-2,4-diene skeleton

The total syntheses of (+)-mycoepoxydiene and (-)-1893A have been completed. The present synthetic strategy features the use of one-pot ring-opening/cross metathesis (ROM/CM) followed by a ring-closing metathesis (RCM) reaction, allowing for the concise construction of the 9-oxabicyclo[4.2.1]nona-2,4-diene framework from a 7-oxabicyclo[2.2.1]hept-2-ene derivative and 1,3-butadiene. The sequential metathesis product was converted into (+)-mycoepoxydiene through the oxidative rearrangement of a furfuryl alcohol to a pyranone, thereby establishing its absolute stereochemistry. From the common intermediate, a structurally related natural product (-)-1893A was also synthesized via the vinylogous aldol reaction.     

Liquid crystalline gel with refractive index gradient of curdlan

Curdlan dissolved in aqueous sodium hydroxide was dialyzed to aqueous calcium chloride to form a gel. Transparent and turbid concentric layers observed in the gel cross section perpendicular to the long axis of the dialysis tube were identified as liquid crystalline gels with refractive index gradient and amorphous gels, respectively. The thickness of each layer was proportional to the diameter of the dialysis tube, and the gelation proceeded in proportion to the root of time. The unique pattern formation was attributed to the change of curdlan conformation and calcium-induced cross-linking resulting from a diffusion of calcium cations and hydroxide anions through the dialysis tube. It is suggested that the orderedness of the curdlan molecules decreases by the increase of the curvature of the concentric liquid crystal layers as the layer comes toward the center of the dialysis tube.