Comparative characterization study of microporous carbons by HRTEM image analysis and gas adsorption

The present work presents a useful comparison of micropore size distributions (MPSDs) obtained from gas adsorption and image analysis of high-resolution transmission electron micrographs. It is shown that the MPSD obtained for a chemical activated carbon is concordant with that obtained from CO2 adsorption. In addition, this technique has allowed us to obtain the MPSD of a carbon molecular sieve (CMS) prepared in our laboratory by a copyrolysis process, which could only be characterized by CO2 adsorption at 273 K (not by N2 adsorption at 77 K due to diffusional problems). The MPSD obtained by high-resolution transmission electron microscopy (HRTEM) for the CMS is wider than that obtained by CO2 adsorption, suggesting that HRTEM is detecting the closed porosity existing in this sample, which is not accessible to gas adsorption. The existence of closed porosity in the CMS is explained considering the preparation method used. Thus, HRTEM combined with image analysis seems to be useful for structural analysis of narrow micropores including closed porosity.     

Collisional activation mass spectra of pentene and hexene molecular ions

The collisional activation spectra of the molecular ions from fourteen pentene and hexene isomers show substantial differences, some of which can be rationalized using known ion fragmentation mechanisms. These differences, and their negligible dependence on ion internal energy, are advantageous for the structural characterization of such isomeric ions, including those produced by fragmentation of larger molecules. The decompositions of metastable ions of the pentenes were nearly identical, but those of the hexenes showed some differences useful for structural charactrization.     

Preferential Uniplanar Orientation of Cellulose Microfibrils Reinvestigated by the FTIR Technique

A simple detection method to observe the uniplanar orientation behavior of native cellulose microfibrils to the cell wall surface by using Fourier transform infrared (FTIR) spectroscopy in the transmission mode is reported. Four bands at 1372, 1355, 1337, and 1317 cm⁻¹ (the latter two have been mentioned previously by Liang and Marchessault (1960, J. Polym. Sci. 43: 85–100)) were found to be sensitive to such orientation: the two middle bands at 1355 and 1337 cm⁻¹ increase remarkably when the 0.60–61 nm lattice planes lie parallel to the cell wall surfaces. The reverse was true when the 0.53–54 nm lattice planes oriented preferentially. Polarization of the two bands at 1372 and 1355 cm⁻¹ was parallel, while that of the other two bands at lower wavenumbers, i.e., at 1337 and 1317 cm⁻¹, was perpendicular to the molecular axis of cellulose. These bands were assigned to OH-related motion, probably to in-plane OH bending, as reported by Maréchal and Chanzy (2000, J. Mol. Spectrosc. 523: 183–196).     

Monomer-isomerization polymerization. XX. Monomer-isomerization polymerization of 2-, 3-, and 4-octenes with Ziegler–Natta catalyst

A study of the monomer isomerization polymerization of 2-, 3-, and 4-octenes has been made with TiCl₃–(C₂H₅)₃Al catalyst at 80°C in comparison with the ordinary polymerization of 1-octene. It was found that all these octenes underwent monomer-isomerization polymerization to give high-molecular-weight homopolymer consisting exclusively of the 1-octene unit. The addition of an isomerization catalyst such as nickel acetylacetonate accelerated this polymerization. The rates of polymerization were found to decrease in the following order: 1-octene > 2-octene > 3-octene > 4-octene. These results indicate that the isomerization proceeded by a stepwise double-bond migration. It was also found that the monomer-isomerization copolymerization of 2-octene and 2-butene occurred under similar conditions and produced copolymers of both 1-olefin units.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.     

Determination of trace amounts of vanadium in air samples with 2-(8-quinolylazo)-5-N,N-diethylaminophenol by reversed-phase liquid chromatography

A reversed-phase liquid chromatographic method for the determination of trace amounts of vanadium is described. Metal ions are converted into 2-(8-quinolylazo)-5-N,N-diethylaminophenol chelates in an off-line system. The chelates are injected onto a Zorbax CN column and separated with an aqueous acetonitrile mobile phase containing no chromogenic reagent. Unter these conditions, only vanadium(V) is spectrophotometrically detected at 540 nm among the metal ions Al(III), Ba(II), Ca(II), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Ga(III), Hg(II), Mg(II), Mn(II), Ni(II), Pb(II), V(V) and Zn(II). Amounts of 8.0–200 pg of vanadium(V) in 100-μl injections can be determined without interference from 10-fold molar excesses of many cations. At 0.001 a.u.f.s., the detection limit (twice the peak-to-peak noise) for vanadium(V) is 8.0 pg in 100 μl of injected solution and the relative standard deviation at 120 pg of vanadium(V) in a 100-μl injection is 3.5%. The proposed method is applied to the determination of vanadium in rain water and airborne particulates.     

Profiling analysis of oligosaccharides in antibody pharmaceuticals by capillary electrophoresis

Carbohydrate chains in glycoprotein pharmaceuticals have important roles for the expression of their biological activities. Therefore, development of an assessment method for the carbohydrate chains is an important parameter for quality control of glycoprotein pharmaceuticals such as newly developed therapeutic antibodies. In this report, we applied capillary electrophoresis with laser-induced fluorescence detection to the analysis of carbohydrate chains after releasing with glycoamidase followed by derivatization with 3-aminobenzoic acid. We found that four major oligosaccharides present in antibody pharmaceuticals were successfully separated with good resolution. The present method showed good precision in both migration times and relative peak areas, and gave comparable accuracy with that using a derivatization method with 8-aminopyrene-1,3,6-trisulfonate.     

NLO‐active maleimide copolymers with ­high glass transition temperatures

We synthesized some novel rigid NLO‐active maleimide copolymers bearing DR‐1 moieties ( PMPD , PHSD and PHND ). All copolymers exhibited high T_g's (190～197 °C), good solubilities for common solvents and excellent film‐forming properties. Dependence of film thickness on the d₃₃ value for the poled copolymer films induced by corona poling was investigated and it was demonstrated that in less than thickness of 0.3 µm decrease of the thickness gives rise to remarkable increase in the d₃₃ value. The poled copolymer films exhibited large d₃₃ values (270 × 10^?9 esu (film thickness 0.13 µm) for PMPD , 290 × 10^?9 esu (0.12 µm) for PHSD and 350 × 10^?9 esu (0.08 µm) for PHND ) as well as large r₃₃ values (51.0 pmV^?1 for PMPD and 60.4 pmV^?1 for PHND ) which are significantly large compared to the value of LiNbO₃ (31 pmV^?1) as a typical EO material. The d₃₃ values of the poled copolymers were kept constant even after standing 1000h at 80 °C, although a small decrease was observed at an initial stage. Further, the d₃₃ values did not change up to ca. 123 °C upon heating at the rate of 10 °C/min in all cases. Copyright © 2002 John Wiley & Sons, Ltd.