Superconducting microwave cavity towards controlling the motion of polar molecules

We propose the use of superconducting microwave cavities for the focusing and deceleration of cold polar molecular beams. A superconducting cavity with a high quality factor produces a large ac Stark shift in polar molecules, which allow us to efficiently control molecular motion. Our discussion is based on the experimental characterization of a prototype cavity: a lead–tin-coated cylindrical copper cavity, which has a quality factor of 10⁶ and tolerates several watts of input power. Such a microwave device provides a powerful way to control molecules not only in low-field-seeking states, but also in high-field-seeking states such as the ground rotational state.     

Sinusoidal Phase-Modulating Superluminescent Diode Interferometer with Fabry-Perot Etalone for Step-Profile Measurement

In this paper we use a superluminescent diode (SLD) as the light source of an interferometer and extract a narrow spectrum from a wide spectrum of the SLD with a Fabry-Perot Etalone (FPE). By varying sinusoidally the distance between the two mirrors of FPE, the central wavelength of the narrow spectrum is scanned sinusoidally. The distance between the mirrors is exactly set by a feedback control system, and sinusoidal phase-modulated SLD light that has a large scanning width of about 10 nm can be obtained with high stability and spatial uniformity. The phase of the interference signal has two different components. One is amplitude Z_b of sinusoidal phase modulation, which is proportional to the optical path difference (OPD) and the scanning width. The other is conventional phase α, which provides a fractional value of the OPD in the range of the wavelength. By combining the two values of the OPD obtained from Z_b and α, an exact OPD larger than the wavelength can be measure with ment accuracy in α. Characteristics of the interferometer are made clearly through step-profile measurements.     

Self-oscillation of polymer chains with rhythmical soluble-insoluble changes

Self-oscillation of polymer chains in an aqueous solution has been achieved. The ruthenium catalyst for the Belousov-Zhabotinsky reaction was polymerized by using N-isopropylacrylamide and dissolved into the solution containing the BZ substrates. Periodical soluble-insoluble changes of the polymer chain were spontaneously induced by the BZ reaction. The conformational oscillations of the polymer were measured as the optical transmittance changes of the solution. This is the first report that rhythmical and reversible soluble-insoluble changes of polymer chains are realized under constant and homogeneous conditions. The transducing system from chemical energy of the BZ reaction to optical information has been constructed.     

Catalytic enantioselective allylation of aldehydes using β-amido functionalized allylstannanes with chiral In(OTf)3/i-Pr-pybox complexes

The enantioselective allylation of aldehydes using a variety of β-amido functionalized allyltributylstannanes proceeded smoothly with good to high yields and enantioselectivities in the presence of 10 mol % of a chiral catalytic complex prepared from In(OTf)₃ and 2,6-bis[(S)-4-isopropyloxazolin-2-yl]pyridine {(S)-i-Pr-pybox}, providing the corresponding chiral γ-hydroxy amides.     

Measurement of diameter of metal cylinders using a sinusoidally vibrating interference pattern

A method for measuring external diameters of metal cylinders is proposed in which a sinusoidally vibrating interference pattern (SVIP) of 100-μm period is used as an exact scale. Lights from the end-points of a metal cylinder are extracted with a spatial filtering in an imaging system to form a cross-sectional image of the metal cylinder. On the image a sinusoidally phase-modulated signal owing to the SVIP is detected with a CCD image sensor to measure the phases of the SVIP at the two end-points of the cylinder. The coordinates of the two end-points are obtained from the phases at the two end-points, the phase distribution of the SVIP, and the coordinates of the pixels of the CCD image sensor. Metal cylinder diameters of 7.99, 8.00, and 9.00 mm are measured along their length directions with an error less than 1 μm.     

Laser induced fluorescence spectroscopy of tetracene with large Ar, Ne, and H2 clusters in superfluid He nanodroplets

Clusters of tetracene molecules with different numbers of attached (Ar)(N), (Ne)(N) and (H(2))(N) particles (N = 1-2000) are assembled inside superfluid He nanodroplets and studied via laser-induced fluorescence. The frequency shift of the fluorescence spectrum of the tetracene molecules is studied as a function of cluster size and pickup order of tetracene and cluster species. For (Ar)(N) and (Ne)(N) clusters, our results indicate that the tetracene molecules reside inside the clusters when tetracene is captured by the He nanodroplet before the cluster species; conversely, the tetracene molecules stay on the surface of the clusters when tetracene is captured after the cluster species. In the case of (H(2))(N) clusters, however, tetracene molecules reside inside the (H(2))(N) clusters irrespective of the pickup order. We conclude that (Ar)(N) and (Ne)(N) clusters are rigid at T = 0.38 K, while (H(2))(N) clusters of up to N = 2000 remain fluxional at the same temperature. The results may also indicate the occurrence of heterogeneous nucleation of the (H(2))(N) clusters, which is induced by the interaction with tetracene chromophore molecules.     

A redox-active ionic liquid manifesting charge-transfer interaction between a viologen and carbazole and its effect on the viscosity,ionic conductivity,and redox process of the viologen

Redox-active ionic liquids (RAILs) are gaining attention as a material that can create a wide range of functions. We herein propose a charge-transfer (CT) RAIL by mixing two RAILs, specifically a carbazole-based ionic liquid ([CzC₄ImC₁][TFSI]) as a donor and a viologen-based ionic liquid ([C₄VC₇][TFSI]₂) as an acceptor. We investigated the effect of CT interaction on the physicochemical properties of the CT ionic liquid (CT-IL) using the results of temperature-dependent measurements of UV-vis absorption, viscosity, and ionic conductivity as well as cyclic voltammograms. We employed the Walden analysis and the Grunberg–Nissan model to elucidate the effect of the CT interaction on the viscosity and ionic conductivity. The CT interaction reduces the viscosity by reducing the electrostatic attraction between the dicationic viologen and TFSI anion. It also reduces the ionic conductivity by the CT association of the dicationic viologen and carbazole. The electrochemically reversible responses of the viologens in [C₄VC₇][TFSI]₂ and CT-IL are consistent with the Nernstian and the interacting two-redox site models. Notably, the transport and electrochemical properties are modulated by CT interaction, leading to unique features that are not present in individual component ILs. The inclusion of CT interaction in RAILs thus provides a powerful means to expand the scope of functionalized ionic liquids.

A redox-active ionic liquid (RAIL) consisting of a carbazole and viologen shows charge transfer (CT) interaction. The physicochemical properties are modulated by the CT interaction by comparison with the individual RAILs.     

Dynamic dendrimer at electrified interface: potential dependent adsorption-desorption and reorientation of a 4-pyridyl-modified PAMAM dendrimer

Potential-dependent dynamic adsorption-desorption and reorientation of a 4-pyridyl modified PAMAM G2 dendrimer at a Au(111) electrode has been demonstrated.