Stir bar sorptive extraction and thermal desorption-gas chromatography-mass spectrometry for trace analysis of triclosan in water sample

A simple and highly sensitive method called stir bar sorptive extraction (SBSE) and thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS), which is used for the determination of trace amounts of 5-chloro-2-(2,4-dichlorophenoxy)phenol (triclosan) in river water samples, is described. A stir bar coated with polydimethylsiloxane (PDMS) is added to a 10mL water sample and stirring is carried out for 120min at room temperature (25 degrees C) in a vial. Then, the PDMS stir bar is subjected to TD-GC-MS. The detection limit of triclosan is 5ngL(-1) (ppt). The method shows linearity over the calibration range (0.02-20mugL(-1)) and the correlation coefficient is higher than 0.997 for triclosan standard solution. The recovery of triclosan in river water samples ranges from 91.9 to 108.3% (RSD: 4.0-7.0%). This simple, accurate, sensitive, and selective analytical method may be used in the determination of trace amounts of triclosan in river water samples.     

Mercury speciation and analysis in drinking water by stir bar sorptive extraction with in situ propyl derivatization and thermal desorption-gas chromatography-mass spectrometry

A method for mercury analysis and speciation in drinking water was developed, which involved stir bar sorptive extraction (SBSE) with in situ propyl derivatization and thermal desorption (TD)-GC-MS. Ten millilitre of tap water or bottled water was used. After a stir bar, pH adjustment agent and derivatization reagent were added, SBSE was performed. Then, the stir bar was subjected to TD-GC-MS. The detection limits were 0.01 ng mL(-1) (ethylmercury; EtHg), 0.02 ng mL(-1) (methylmercury; MeHg), and 0.2 ng mL(-1) (Hg(II) and diethylmercury (DiEtHg)). The method showed good linearity and correlation coefficients. The average recoveries of mercury species (n=5) in water samples spiked with 0.5, 2.0, and 6.0 ng mL(-1) mercury species were 93.1-131.1% (RSD<11.5%), 90.1-106.4% (RSD<7.8%), and 94.2-109.6% (RSD<8.8%), respectively. The method enables the precise determination of standards and can be applied to the determination of mercury species in water samples.     

Simultaneous analysis of benzophenone sunscreen compounds in water sample by stir bar sorptive extraction with in situ derivatization and thermal desorption-gas chromatography-mass spectrometry

A method for the simultaneous measurement of benzophenone (BP) sunscreen compounds, its derivatives 2,4-dihydroxybenzophenone (BP-1), 2-hydroxy-4-methoxybenzophenone (BP-3), 2-hydroxy-4-methoxy-4'-methylbenzophenone (BP-10), 2-hydroxybenzophenone (2OH-BP), 3-hydroxybenzophenone (3OH-BP) and 4-hydroxybenzophenone (4OH-BP), in water samples was developed using stir bar sorptive extraction (SBSE) with in situ derivatization followed by thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS). The detection limit is 0.5-2 ng L(-1) (ppt) for the seven BPs. The method shows good linearity and the correlation coefficients are equal to or higher than 0.990 for all the analyte. The average recoveries of BPs range from 102.0 to 128.1% (RSD<15.4%, n=6). Trace amounts of BPs in river water samples were determined by the present method.     

Lamellar structure in poly(ala-gly) determined by solid-state NMR and statistical mechanical calculations

Lamellar structure of poly(Ala-Gly) or (AG)n in the solid was examined using 13C solid-state NMR and statistical mechanical approaches. Two doubly labeled versions, [1-13C]Gly14[1-13C]Ala15- and [1-13C]Gly18[1-13C]Ala19 of (AG)15 were examined by two-dimensional (2D) 13C spin diffusion NMR in the solid state. In addition five doubly labeled [15N,13C]-versions of the same peptide, (AG) 15 and 15 versions labeled [3-13C] in each of the successive Ala residues were utilized for REDOR and 13C CP/MAS NMR measurements, respectively. The observed spin diffusion NMR spectra were consistent with a structure containing a combination of distorted beta-turns with a large distribution of the torsion angles and antiparallel beta-sheets. The relative proportion of the distorted beta-turn form was evaluated by examination of 13C CP/MAS NMR spectra of [3-13C]Ala-(AG)15. In addition, REDOR determinations showed five kinds of atomic distances between doubly labeled 13C and 15N nuclei which were also interpreted in terms of a combination of beta-sheets and beta-turns. Our statistical mechanical analysis is in excellent agreement with our Ala Cbeta 13C CP/MAS NMR data strongly suggesting that (AG)15 has a lamellar structure.     

Specific isolation of N-terminal fragments from proteins and their high-fidelity de novo sequencing

A new method to determine N-terminal amino acid sequences of multiple proteins at low pmol level by a parallel processing has been developed. The method contains the following five steps: (1) reduction, S-alkylation and guanidination for targeted proteins; (2) coupling with sulfosucccimidyl-2-(biotinamido)ethyl-1,3-dithiopropionate(sulfo-NHS-SS-biotin) to N(alpha)-amino groups of proteins; (3) digestion of the modified proteins by an appropriate protease; (4) specific isolation of N-terminal fragments of proteins by affinity capture using the biotin-avidin system; (5) de novo sequence analysis of peptides by MALDI-TOF-/MALDI-TOF-PSD mass spectrometry with effective utilization of the CAF (chemically assisted fragmentation) method.1 This method is also effective for N-terminal sequencing of each protein in a mixture of several proteins, and for sequencing components of a multiprotein complex. It is expected to become an essential proteomics tool for identifying proteins, especially when used in combination with a C-terminal sequencing method.     

Simultaneous detection of N-terminal fragment ions in a protein mixture using a ruthenium(II) complex

Use of a bis(terpyridine)ruthenium(II) derivative as an N-terminal labeling reagent resulted in the simultaneous detection and individual determination of all the N-terminal fragments of the proteins in a mixture without requiring any separation. All of the N-termini of the guanidinated proteins were labeled selectively by the ruthenium complex (-CO-labeling). After chymotryptic digestion, the fragments were analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and post-source decay (PSD). The -CO moiety exclusively enhanced N-terminal fragment ions in mass spectra and enabled easy N-terminal sequencing. In a mixture containing three different proteins (lysozyme, ubiquitin, and insulin), all of the N-terminal fragment ions labeled with the ruthenium complex were found to produce uniformly intense peaks without the detection of the other unlabeled fragments. The N-terminal sequences of these ions were determined individually by PSD analysis. Application to unknown proteins from Thermus thermophilus HB8 with two-dimensional electrophoretic separation resulted in the successful determination of the N-terminal sequence and easy identification of the target protein.     

Kinetic investigations of the process of encapsulation of small hydrocarbons into a cavitand-porphyrin

Exchange of guest molecules into capsule shaped host molecules is the most fundamental process in host-guest chemistry. Several examples of quantitative measurements of guest exchange rates have been reported. However, there have been no reports on the activation energies of these processes. A molecule known as cavitand-porphyrin (H2CP) has been reported to have a flexible host structure capable of facilitating moderate guest exchange rates suitable for kinetic measurements of the guest exchange process with 1H NMR. In this article, various kinetic and thermodynamic parameters related to the process of encapsulation of small hydrocarbons into H2CP in CDCl3 solution were determined by 2D exchange spectroscopy (EXSY): association and dissociation rate constants (k(ass) = 320 M-1 s-1, k(diss) = 1.4 s-1 for methane at 25 degrees C), the corresponding activation energies (E(a,ass) = 27 kJ.mol-1, E(a,diss) = 58 kJ.mol-1), and thermodynamic parameters for each process (DeltaG++(ass) = 59 kJ.mol-1, DeltaG++(diss) = 72 kJ.mol-1, DeltaH++(ass) = 25 kJ.mol-1, DeltaH++(diss) = 55 kJ.mol-1, DeltaS++(ass) = -113 J.K-1.mol-1, and DeltaH++(diss) = 58 J.K-1.mol-1 for methane). The thermodynamic parameters (DeltaG degrees = -13 kJ.mol-1, DeltaH degrees = -31 kJ.mol-1, DeltaS degrees = -60 J.K-1.mol-1 for methane) for this encapsulation equilibrium determined by EXSY were comparable to those for methane determined by 1D 1H NMR titration (DeltaG degrees = -11 kJ.mol-1, DeltaH degrees = -33 kJ.mol-1, DeltaS degrees = -75 J.K-1.mol-1 for methane). In addition, the structure of the methane encapsulation process was revealed by ab initio MO calculations. The activation energies for methane association/dissociation were estimated from MP2 calculations (E(a,ass) = 58.3 kJ.mol-1, E(a,diss) = 89.1 kJ.mol-1, and DeltaH degrees = -30.8 kJ.mol-1). These values are in accord with the experimentally determined values. The observed guest exchange rates and energies are compared with the corresponding values of various reported capsule-shaped hosts.     

Two-dimensional networks based on Mn4 complex linked by dicyanamide anion: from single-molecule magnet to classical magnet behavior

Three two-dimensional (2D) network compounds based on Mn(III)/Mn(II) tetranuclear single-molecule magnets (SMMs) connected by dicyanamide (dcn-) linkers have been synthesized: [Mn4(hmp)4(Hpdm)2(dcn)2](ClO4)2 x 2 H2O x 2 MeCN (2), [Mn4(hmp)4Br2(OMe)2(dcn)2] x 0.5 H2O x 2 THF (3), [Mn4(hmp)6(dcn)2](ClO4)2 (4), where Hhmp and H2pdm are 2-hydroxymethylpyridine and pyridine-2,6-dimethanol, respectively. The [Mn4]/dcn- system appears very versatile, but enables its chemistry to be rationalized by a fine-tune of the synthetic conditions. The double cuboidal [Mn4] unit is preserved in the whole family of compounds, despite strong modifications of its Mn(II) coordination sphere. The chemical control of the coordination number of dcn- on the Mn(II) sites has been the key to obtain the following series of compounds: a discrete cluster, [Mn4(hmp)6(NO3)2(dcn)2] x 2 MeCN (1), 2D networks (2, 3, and 4), and the previously reported 3D compound, [Mn4(hmp)4(mu3-OH)2][Mn(II)(dcn)6] x 2 MeCN x THF. Direct current magnetic measurements show that both Mn2+-Mn3+ and Mn3+-Mn3+ intra-[Mn4] magnetic interactions are ferromagnetic leading to an S(T) = 9 ground state for the [Mn4] unit. Despite the very similar 2D lattices in 2-4, the two kinds of orientation of the [Mn4] unit (i.e., angle variations between the two easy axes) lead to different magnetic properties ranging from SMM behavior for 2 and 1 to a long-range canted antiferromagnetic order for 4. Compound 3 is more complicated as the magnetic measurements strongly suggest the presence of a canted antiferromagnetic order below 2.1 K, although the magnetization slow relaxation is simultaneously observed. Heat capacity measurements confirm the long-range magnetic order in 4, while in 3, the critical behavior is frozen by the slow relaxation of the anisotropic [Mn4] units.