Difference in spin crossover pathways among saddle-shaped six-coordinated iron(III) porphyrin complexes

The electronic states of a series of saddle-shaped porphyrin complexes [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) have been examined in solution by (1)H NMR, (13)C NMR, and EPR spectroscopy and by magnetic measurements. While [Fe(OMTPP)(DMAP)(2)](+) and [Fe(TBTXP)(DMAP)(2)](+) maintain the low-spin (S = (1)/(2)) state, [Fe(OMTPP)(THF)(2)](+) and [Fe(TBTXP)(THF)(2)](+) exhibit an essentially pure intermediate-spin (S = (3)/(2)) state over a wide range of temperatures. In contrast, the Py and 4-CNPy complexes of OMTPP and TBTXP exhibit a spin transition from S = (3)/(2) to S = (1)/(2) as the temperature was decreased from 300 to 200 K. Thus, the magnetic behavior of these complexes is similar to that of [Fe(OETPP)Py(2)](+) reported in our previous paper (Ikeue, T.; Ohgo, Y.; Yamaguchi, T.; Takahashi, M.; Takeda, M.; Nakamura, M. Angew. Chem., Int. Ed. 2001, 40, 2617-2620) in the context that all these complexes exhibit a novel spin crossover phenomenon in solution. Close examination of the NMR and EPR data of [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) (L = Py, 4-CNPy) revealed, however, that these complexes adopt the less common (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature in contrast to [Fe(OETPP)Py(2)](+) which shows the common (d(xy))(2)(d(xz), d(yz))(3) electron configuration. These observations have been attributed to the flexible nature of the OMTPP and TBTXP cores as compared with that of OETPP; the relatively flexible OMTPP and TBTXP cores can ruffle the porphyrin ring and adopt the (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature. Therefore, this study reveals that the rigidity of porphyrin cores is an important factor in determining the spin crossover pathways.     

Synthesis of oligo(spiroketal)s by polycondensation of silyl ethers derived from naturally occurring myo‐inositol with 1,4‐cyclohexanedione

Oligo(spiroketal)s (OSKs) were synthesized from myo‐inositol, a naturally occurring cyclic compound bearing six hydroxyl groups. The successful synthesis of OSKs was achieved using silyl ethers 2 derived from 1,4‐di‐O‐alkylated myo‐inositol 1 as monomers, which underwent polycondensation with 1,4‐cyclohexanedione (CHD) at 0 °C in the presence of trimethylsilyl triflate as a catalyst. Because of the irreversible nature of the condensation reaction of silyl ethers with ketones, the resulting OSKs 7 had higher molecular weights than previously reported OSKs that were obtained by polycondensation of tetraols 1 with CHD, where backward hydrolysis of the ketal functions occurred. In addition, another series of OSKs, 8, were synthesized using silyl ethers 3 derived from 2,5‐di‐O‐alkylated myo‐inositol 6 , which are more symmetric monomers than silyl ethers 2 . Silyl ethers 3 underwent efficient polycondensation with CHD, whereas tetraol 6 did not, demonstrating that the derivation of such tetraols into the corresponding silyl ethers is a powerful strategy to access OSKs. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2407–2414     

Synthesis of L-Lysine and L-Glutamic Acid Derivatives with Long Alkyl Chains and Polycondensation of Langmuir-Blodgett Films

Two esters of L-lysine and L-glutamic acid containing long alkyl groups were synthesized and their polycondensation in monolayers and multilayers was investigated. The pressure-area isotherms of the ester of L-lysine depend markedly on the time of residence at the air-water interface. The change of FT-IR spectra of the deposited film, which can be lifted as a Z-type film, indicates that polycondensation can occur in the monolayer at 10°C without any treatment. The spectrum of the film cast from chloroform hardly changed with time. These results lead to the conclusion that a regular arrangement of monomer molecules in the monolayer, where the amino and ester carbonyl groups are concentrated, is more suitable for the polycondensation. The ester of L-glutamic acid can also form stable monolayers which can be easily deposited on a hydrophobic plate as a Y-type film by the Blodgett technique. The polycondensation of multilayers under an atmosphere of triethylamine was investigated by IR spectroscopy. It indicates that the condensation in multilayers proceeds via intermolecular and intramolecular reactions, by which poly(L-glutamate) derivatives and 2-pyrrolidone derivatives are formed, respectively. The condensation in the bulk crystalline powder gives exclusively the 2-pyrrolidone derivative by intramolecular reaction. These results suggest that the monomer molecules in the multilayers are favorably aligned for the intermolecular reaction, in contrast to the situation in the bulk crystalline powder.     

Officinatrione: an unusual (17S)-17,18-seco-lupane skeleton,and four novel lupane-type triterpenoids from the roots of Taraxacum officinale

Novel 5 lupane-type of triterpenois, i.e., 3β-acetoxy-18α,19α-epoxylupan-21β-ol (1), 18α,19α-epoxy-21β-hydroxylupan-3-one (2), lup-18-ene-3,21-dione (3), lupa-18,21-dien-3β-yl acetate (4), and (17S)-17,18-seco-lup-19(21)-ene-3,18,22-trione (5), named officinatrione, as well as 16 known compounds from the roots of Taraxacum officinale collected in Takatsuki city, Osaka, Japan. Of the above compounds, 5 was the first lupane-type triterpene, of which the D-ring was open to form a nine-membered ring. Compounds 2 and 5 exhibited moderate cytotoxic activities against L1210 cell line (IC₅₀ 10.5 and 10.1 μM).     

Novel synthesis of zerumbone-pendant derivatives and their biological activity

Zerumbone 1, having powerful latent reactivity and containing two conjugated double bonds and a double conjugated carbonyl group is the major component of the essential oil of wild ginger, Zingiber zerumbet Smith. The conjugation system plays an important role in the expression of biological activity. N-Bromosuccinimide (NBS) reaction of 1 gave high reactive intermediate 2 with an exo-methylene group, which was obtained from 1 quantitatively. Treatment of 2 with nucleophiles gave various zerumbone-pendant derivatives, including C–H, C–O, C–N, and C–C bond formation, maintaining the conjugation system through S_N2′-type reaction. Almost all zerumbone-pendant derivatives showed a good value of IC₅₀ against the suppressive effect of NO generation. Among them, amine derivative 5, binding with 2 mol of zerumbone, showed the strongest activity (IC₅₀: 0.24 μM).     

Ni‐Catalyzed [4+3+2] Cycloaddition of Ethyl Cyclopropylideneacetate and Dienynes: Scope and Mechanistic Insights

A detailed study of the Ni‐catalyzed [4+3+2] cycloaddition reaction between ethyl cyclopropylideneacetate and dienynes has been conducted, resulting in the development of a new method for the synthesis of compounds containing nine‐membered rings. We studied the reactivity of various dienynes, together with their substituent and conformational effects. The mechanism of the reaction was probed by examining the stoichiometric reactions of the Ni complexes and dienynes.     

Application of simplified desorption method to study on sorption of americium(III) on bentonite

To elucidate the sorption behavior of americium(III) on bentonite, which is a mixture of montmorillonite clay, quartz and other minerals, simplified desorption experiments were applied to the solid phases collected after the sorption experiments. The sorption–desorption behavior was examined in the final pH range from 2 to 8. The desorption experiments revealed that most of the Am was sorbed on the montmorillonite moiety of the bentonite. The sorption of Am on montmorillonite was divided into two types: one was the “exchangeable” sorption, in which the sorbed Am was desorbed with a 1 M KCl aqueous solution, and the rest was the “unexchangeable” sorption. The exchangeable sorption was ion exchange of mostly Am³⁺. The unexchangeable sorption was the strong sorption of Am hydroxides. An accessory iron mineral, pyrite, might be involved in the Am sorption on bentonite at neutral pH.     

Classical phase space revealed by coherent light

We study the far-field characteristics of oval-resonator laser diodes made of an GaAs/Al(x)Ga(1-x)As quantum well. The resonator shapes are various oval geometries, thereby probing chaotic and mixed classical dynamics. The far-field pattern shows a pronounced fine structure that strongly depends on the cavity shape. Comparing the experimental data with ray-model simulations for a Fresnel billiard yields convincing agreement for all geometries and reveals the importance of the underlying classical phase space for the lasing characteristics.     

High-quality lowest-loss-mode lasing in GaAs quasi-stadium laser diodes having unstable resonators

We obtained high-quality lowest-loss-mode lasing in quasi-stadium laser diodes having unstable resonators that consisted of two curved end mirrors and two straight sidewall mirrors. The laser diodes were fabricated by applying a reactive ion etching technique to a metal-organic chemical-vapor deposition-grown graded-index separate-confinement heterostructure single-quantum-well GaAs/AlGaAs structure. The electrode contact area of the laser diodes was formed along unstable periodic orbits, along which the optical beams are localized. Highly directional fan-out beams corresponding to the numerically obtained lowest loss mode were emitted from the end mirrors under CW operation at room temperature.