A molecular dynamics simulation of a homogeneous organic-inorganic hybrid silica membrane

A new molecular dynamics simulation method was successfully applied to construct a homogeneous organic-inorganic hybrid silica membrane using the hybrid-pcff (h-pcff) potential function. Analysis suggested that the hybrid BTESE silica membrane provided a looser network and larger cavity size for the enhancement of gas permeability and selectivity.     

A study on the role of gelatin in methacrylic-acid-based gel dosimeters

In radiotherapy treatment, polymer gel dosimetry can be used for verifying three-dimensional (3D) dose distributions. Gelatin is generally used as a gelling agent in the dosimeters. In this paper, another role of gelatin in a methacrylic-acid-based gel dosimeter (MAGAT) is investigated. Temperature increases due to exothermic polymerization in the irradiated gel are measured directly. Dose–R₂ responses are also obtained using MRI. It is shown that no appreciable increases in either temperature or R₂ are observed in MAGAT dosimeters made without gelatin, and that significant temperature and R₂ increases are observed when very low gelatin concentrations are used. These results indicate that gelatin is an important enabler for radiation-induced free-radical polymerization in methacrylic-acid-based gels. When gelatin is replaced by amino acids, changes in temperature are observed, along with small changes in R₂. The resulting dosimeter solutions remain transparent because the polymer does not precipitate as it does in regular MAGAT dosimeters containing gelatin. When the amino acids are replaced by acids without amino groups, no temperature or R₂ changes are observed, indicating that no polymer forms. These results show that amino groups (and possibly other functional groups) on the gelatin catalyze the radiation-induced free-radical polymerization that occurs in MAGAT dosimeters.     

Non-glutamate type pyrrolo[2,3-d]pyrimidine antifolates. III. Synthesis and biological properties of N(omega)-masked ornithine analogs

The glutamic acid moiety of N-[4-[3-(2,4-diamino-7H-pyrrolo[2,3-d]pyrimidin-5-yl)propyl]benzoyl]-L-g lutamic acid (1b, TNP-351) and the related compound (1a), was replaced with various N(omega)-acyl-, sulfonyl-, carbamoyl- and aryl-2,omega-diaminoalkanoic acids, and the inhibitory effects of the resulting products (9, 11, 14, 18, 21, 23, 25, 30, 36) on dihydrofolate reductase (DHFR), the growth of murine fibrosarcoma Meth A cells, and methotrexate-resistant human CCRF-CEM cells, were examined. Compounds (9a-f) acylated with a hemiphthaloyl group were efficiently synthesized by coupling pyrrolo[2,3-d]pyrimidine carboxylic acids (7a,b) and N(omega)-phthaloyl 2,omega-diaminoalkanoic acid methyl esters (6a-c) and subsequent hydrolysis. The other N(omega)-acyl- and sulfonyl-ornithine analogs (21, 23, 25) were synthesized by acylation of free amino intermediates (19a,b) derived from tert-butoxycarbonyl-ornithine analogs (17a,b). A free ornithine analog (18) did not strongly inhibit Meth A cell growth, whereas all N(omega)-acyl-, sulfonyl-, carbamoyl- and aryl-ornithine analogs (9, 11, 21, 23, 25, 30, 36) exhibited much more potent inhibitory activities against both DHFR and Meth A cell growth. In particular, compounds 9c, 21k and 36a also showed remarkable growth-inhibitory activities against methotrexate-resistant CCRF-CEM cells. These results demonstrate that the potent inhibitory activities of N(omega)-masked ornithine analogs against the growth of Meth A cells and methotrexate-resistant CCRF-CEM cells, results from effective uptake via reduced folate carrier and their potent DHFR inhibition.     

Effect of polymer excipients on the enzyme activity of lyophilized bilirubin oxidase and beta-galactosidase formulations

The effects of excipients on the protein stability during lyophilization as well as the storage stability of lyophilized bilirubin oxidase (BO) and beta-galactosidase (GA) formulations were studied using four polymer excipients: dextran, polyvinylalcohol (PVA), poly(acrylic acid) (PAA), and alpha, beta-poly(N-hydroxyethyl)-L-aspartamide (PHEA). Denaturation of BO and GA during lyophilization largely depended on the excipient used. Dextran appeared to cause severe damage to proteins, whereas PHEA protected proteins effectively from denaturation. Storage stability of BO and GA formulations also depended on the excipients, such that the formulations containing dextran and PAA were relatively unstable. Storage stability was improved by absorption of a small amount of water for all the formulations studied. Absorption of a larger amount of water, however, decreased the storage stability of the formulations containing PVA, PAA or PHEA. In contrast, the storage stability of formulations containing dextran did not decrease noticeably with increasing water. This may be because formulations containing dextran have a higher glass transition temperature than formulations containing PVA, PAA or PHEA when a large amount of water is absorbed.     

Thermal decomposition of SO4 2?-intercalated Mg–Al layered double hydroxide

The thermal properties of SO₄ ^2?-intercalated Mg?CAl layered double hydroxide (SO₄·Mg?CAl LDH) were investigated using simultaneous thermogravimetry?Cmass spectrometry (TG?CMS), and the elimination behavior of sulfur oxides from this double hydroxide was examined. The TG?CMS results showed that SO₄·Mg?CAl LDH decomposed in five stages. The first stage involved evaporation of surface-adsorbed water and interlayer water in SO₄·Mg?CAl LDH. In the second, third, and fourth stages, dehydroxylation of the brucite-like octahedral layers in SO₄·Mg?CAl LDH occurred. The fifth stage corresponded to the elimination of SO₄ ^2? intercalated in the interlayer of Mg?CAl LDH, producing SO₂ and SO₃. The thermal decomposition of SO₄·Mg?CAl LDH resulted in the formation of SO₂ and SO₃ at 900?C1000?°C, which then reacted with H₂O to form H₂SO₃ and H₂SO₄. The elimination of sulfur oxides increased with the decomposition time and temperature. Almost all of the intercalated SO₄ ^2? was desulfurized from SO₄·Mg?CAl LDH at 1000?°C; however, Mg?CAl oxide was not formed due to the production of MgO and MgAl₂O₄.     

Beta-replacement reaction of serine-O-carbonate derivatives with thiols catalyzed by a pyridoxal model having an ionophore side-chain

Serine-O-carbonate derivatives, including peptides having a serine-O-carbonate residue at the N-terminal position, are catalytically transformed into S-substituted cysteine derivatives employing the pyridoxal model having an ionophore function in the presence of Li+; this is the first artificial model mimicking cystathionine Beta-synthase.     

Extraction separation of strontium and yttrium radionuclides by hydrogen heptachlorodicarbollylcobaltate in the presence of benzo-15-crown-5

Extraction of strontium and yttrium by the nitrobenzene solution of H⁺-form of heptachloro-bis-1,2-dicarbollylcobaltate (H⁺B^–) in the presence of benzo-15-crown-5 (B15C5, L) has been investigated. The presence of B15C5 leads to a great synergistic effect for the extraction of strontium and an antagonistic effect for the extraction of yttrium. The extraction constants of Sr²⁺ complexes of B15C5 were determined. The separation factor a(Sr/Y) in the system with B15C5 presents the same order of magnitude as that for 15C5.     

Molecular mobility of lyophilized poly(vinylpyrrolidone) and methylcellulose as determined by the laboratory and rotating frame spin-lattice relaxation times of 1H and 13C

Laboratory- and rotating- frame spin-lattice relaxation times (T(1) and T(1rho)) of (1)H and (13)C in lyophilized poly(vinylpyrrolidone) (PVP) and methylcellulose (MC) are determined to examine feasibility of using T(1) and T(1rho) as a measure of molecular motions on large time scales related to the storage stability of lyophilized formulations. The T(1rho) of proton and carbon was found to reflect the mobility of PVP and MC backbones, indicating that it is useful as a measure of large-time-scale molecular motions. In contrast to the T(1rho), the T(1) of proton measured in the same temperature range reflected the mobility of PVP and MC side chains. The T(1) of proton may be useful as a measure of local molecular motions on a smaller-time-scale, although the measurement is interfered by moisture under some conditions. The temperature dependence of T(1) and T(1rho) indicated that methylene in the MC molecule had much higher mobility than that in the dextran molecule, also indicated that methylene in the PVP side chain had a higher mobility than that in the MC side chain.     

Selective hydrogen peroxide oxidation of sulfides to sulfoxides or sulfones with MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions

Selective oxidation of sulfides to sulfoxides and sulfones with hydrogen peroxide under organic solvent-free conditions was demonstrated by the MWW-type titanosilicate zeolite catalyst. Sulfides were oxidized smoothly to give sulfoxides with good selectivities at ambient temperature using 1.0–1.2 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst. Especially, the Ti-MWW with an interlayer-expanded structure (Ti-IEZ-MWW) catalyst showed high activity with good chemoselectivity for the oxidation of various sulfides. The catalyst is recyclable for at least five cycles, and the only byproduct is water. Sulfides were directly oxidized to give sulfones in high yields by 2.5 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions.     

Where is the Oxygen? Structural Analysis of α‐Humulene Oxidation Products by the Crystalline Sponge Method

Crystal structures of α‐humulene, a cyclic sesquiterpene, and its oxidized subproducts, were analyzed by the crystalline sponge method. Regio‐ and stereochemistry, including absolute configuration when a chiral oxidant was applied, and the stable conformations of all the scaffold‐related compounds were successfully determined for samples on a 5–50 μg scale.