Deep levels and growth conditions of LPE GaAs crystals

Deep levels in LPE GaAs were studied in relation to growth conditions. The residual deep levels in LPE layers are hole traps 0.50 and 0.65 eV above the top of the valence band. Their concentrations are of the order of 10¹³ cm^-3 for growth temperatures between 650 and 840°C, and increase with increasing growth temperature. The activation energy of incorporation is about 0.7 eV, which is very close to that of an arsenic vacancy. It is also noted that their concentrations near the grown surface are independent of the growth temperature. This indicates that the hole traps undergo an annealing effect after the growth period. From the experimental results for Fe and oxygen doping, each impurity acts as a deep level only when it makes a complex defect with a gallium vacancy, otherwise they are shallow levels, The distribution coefficients at 750°C are 1 × 10^-7 and 1.1 × 10^-5 for the deep and Fe and the shallow acceptor, respectively.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]?n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was ?67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

Medium range order and optical properties of As2S3 glass

Low frequency Raman scattering and optical absorption edge were measured for As₂S₃ glasses quenched at temperature in the supercooling region of the glasses. It was found that both the Raman spectrum and the optical absorption edge shift to the lower energy side with the rise of the quenching temperature. The effects were interpreted in terms of the order of the arrangements of the layer-like clusters, which become more random as the quenching temperature goes higher.     

Cluster carbonyls of the [Re(6)(mu(3)-Se)(8)](2+) core: synthesis, structural characterization, and computational analysis

The reactions of the previously reported cluster complexes [Re(6)(mu(3)-Se)(8)(PEt(3))(5)I]I, trans-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)I(2)], and cis-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)I(2)] with the [Re(6)(mu(3)-Se)(8)](2+) core with CO in the presence of AgSbF(6) afforded the corresponding cluster carbonyls [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(CO)][SbF(6)](2) (), trans-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)(CO)(2)][SbF(6)](2) (), and cis-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)(CO)(2)][SbF(6)](2) (). Infrared spectroscopy indicated weakening of the bond in CO, suggesting the existence of backbonding between the cluster core and the CO ligand(s). Electrochemical studies focusing on the reversible, one-electron oxidation of the cluster core revealed a large increase in the oxidation potential upon going from the acetonitrile derivatives to their carbonyl analogs, consistent with the depleted electron density of the cluster core upon CO ligation. Disparities between the IR spectra and oxidation potential between and indicate that electronic differences exist between sites trans and cis to the location of a ligand of interest. The active role played by the Se atoms in influencing the cluster-to-CO bonding interactions is suggested through this result and density functional (DF) computational analysis. The computations indicate that molecular orbitals near the HOMO account for backbonding interactions with a high percentage of participation of Se orbitals.     

DFT studies of the characteristics of Pd−Pt core-shell clusters

It is reported that Pd?Pt core-shell type nanoclusters in which the inner atoms of the Pd cluster are substituted by Pt significantly enhance the catalytic activity for cycloocatdiene hydrogenation. In order to discuss the electronic states of core-shell clusters, DFT calculations were carried out for Pd₁₃, Pt₁₃, Pt/Pd₁₂, Pd/Pt₁₂ Pd₃₈ and Pd₆/Pt₃₂ clusters. From these calculations, it was found that the charge transfer between the core atoms and the shell atoms played an important role for the modification of the electronic state of the surface atoms in them.     

Self-modeling curve resolution (SMCR) analysis of near-infrared (NIR) imaging data of pharmaceutical tablets

The idea of quality by design (QbD) has been proposed in pharmaceutical field. QbD is a systematic approach to control the product performance based on the scientific understanding of the product quality and its manufacturing process. In the present study, near-infrared (NIR) imaging is utilized as a tool to achieve this concept. A practical use of a chemometrics technique called self-modeling curve resolution (SMCR) is demonstrated with NIR imaging analysis of pharmaceutical tablets containing two ingredients, a soluble active ingredient, pentoxifylline (PTX), and an insoluble excipient, palmitic acid. Concentration profiles obtained by SMCR reveal that the homogenous distribution of chemical ingredients strongly depends on the grinding time and that its process plays a central role in quantitative control, say sustained-release of PTX. In addition, pure component spectra by SMCR indicate a sequential change of specific NIR peak intensities following the increase of the grinding time. The spectra change shows a molecular structure change related to its crystallinity during grinding process. Accordingly, this study clearly demonstrates that NIR imaging combined with SMCR can be a powerful tool to reveal chemical or physical mechanism induced by the manufacturing process of pharmaceutical products and that it may be a solid solution for QbD of pharmaceutical products.     

Rapid QM/MM approach for biomolecular systems under periodic boundary conditions: Combination of the density‐functional tight‐binding theory and particle mesh Ewald method

A quantum mechanical/molecular mechanical (QM/MM) approach based on the density‐functional tight‐binding (DFTB) theory is a useful tool for analyzing chemical reaction systems in detail. In this study, an efficient QM/MM method is developed by the combination of the DFTB/MM and particle mesh Ewald (PME) methods. Because the Fock matrix, which is required in the DFTB calculation, is analytically obtained by the PME method, the Coulomb energy is accurately and rapidly computed. For assessing the performance of this method, DFTB/MM calculations and molecular dynamics simulation are conducted for a system consisting of two amyloid‐β(1‐16) peptides and a zinc ion in explicit water under periodic boundary conditions. As compared with that of the conventional Ewald summation method, the computational cost of the Coulomb energy by utilizing the present approach is drastically reduced, i.e., 166.5 times faster. Furthermore, the deviation of the electronic energy is less than . © 2016 Wiley Periodicals, Inc.     

Arenophile‐Mediated Dearomative Reduction

A dearomative reduction of simple arenes has been developed which employs a visible‐light‐mediated cycloaddition of arenes with an N‐N‐arenophile and in situ diimide reduction. Subsequent cycloreversion or fragmentation of the arenophile moiety affords 1,3‐cyclohexadienes or 1,4‐diaminocyclohex‐2‐enes, compounds that are not synthetically accessible using existing dearomatization reactions. Importantly, this strategy also provides numerous opportunities for further derivatization as well as site‐selective functionalization of polynuclear arenes.     

Carbohydrate-appended curdlans as a new family of glycoclusters with binding properties both for a polynucleotide and lectins

Beta-1,3-glucans having carbohydrate-appendages (alpha-D-mannoside, N-acetyl-beta-D-glucosaminide and beta-lactoside) at the C6-position of every repeating unit can be readily prepared from curdlan (a linear beta-1,3-glucan) through regioselective bromination/azidation to afford 6-azido-6-deoxycurdlan followed by chemo-selective Cu(i)-catalyzed [3 + 2]-cycloaddition with various carbohydrate modules having a terminal alkyne. The resultant carbohydrate-appended curdlans can interact with polycytosine to form stable macromolecular complexes consistent with two polysaccharide strands and one polycytosine strand. Furthermore, these macromolecular complexes show strong and specific affinity toward carbohydrate-binding proteins (lectins). Therefore, one can utilize these carbohydrate-appended curdlans as a new family of glycoclusters.     

Hydrogen generation from weak acids: electrochemical and computational studies of a diiron hydrogenase mimic

Extended investigation of electrocatalytic generation of dihydrogen using [(mu-1,2-benzenedithiolato)][Fe(CO)3]2 has revealed that weak acids, such as acetic acid, can be used. The catalytic reduction producing dihydrogen occurs at approximately -2 V for several carboxylic acids and phenols resulting in overpotentials of only -0.44 to -0.71 V depending on the weak acid used. This unusual catalytic reduction occurs at a potential at which the starting material, in the absence of a proton source, does not show a reduction peak. The mechanism for this process and structures for the intermediates have been discerned by electrochemical and computational analysis. These studies reveal that the catalyst is the monoanion of the starting material and an ECEC mechanism occurs.