Active species transfer-type artificial light harvesting system in the nanosheet – Dye complexes: Utilization of longer wavelength region of sunlight

A novel light harvesting system that captures long-wavelength light of sunlight by the use of hole transfer was newly investigated. Ga phthalocyanine(Ga^IIITMAPc⁴⁺(D)) and Ru porphyrin(Ru^IIDMPyMP²⁺(A)) co-adsorbed reaction system on the synthetic nanosheet was examined as an artificial light harvesting system. By irradiating 660?nm light, where Ga^IIITMAPc⁴⁺(D) absorbs, to the system under a presence of PtCl₆^2? as an electron acceptor, cation radical of Ru^IIDMPyMP²⁺(A) was produced despite that Ru porphyrin adsorbs only 413 and 533?nm light. The efficient hole transfer reaction from Ga^IIITMAPc⁴⁺(D)⁺, that is generated from its excited state, to Ru^IIDMPyMP²⁺(A) takes place on the nanosheet.     

Behavior of Ionic Liquids Around Charged Metal Complexes: Investigation of Homogeneous Electron Transfer Reactions Between Metal Complexes in Ionic Liquids

The second-order electron transfer reaction between the photo-excited triplet state of [Zn(TPP)]* (TPP?=?5,10,15,20-tetraphenylporphyrin) and [Co(sep)]³⁺ (sep?=?sepulchrate?=?1,3,6,8,10,13,16,19-octaazabicyclo[6.6.6]eicosane) was investigated in three ionic liquids (ILs, 1-R-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with R?=?butyl, pentyl, and hexyl) and in acetonitrile. Results of electrochemical and kinetic measurements indicated that ILs dissociate in the vicinity of charged metal complexes and at electrodes, although the dissociated anionic and cationic components of the ILs seem to exist as pairs around the metal complexes. Second-order rate constants for the electron transfer reaction are 1.88?×?10⁹, 3.65?×?10⁷, 2.63?×?10⁷, and 2.01?×?10⁷ kg·mol^?1·s^?1 in acetonitrile and in the butyl, pentyl and hexyl ILs, respectively, at 298 K, after correction of the contribution of diffusion. The average slope of the plot of the logarithmic second-order rate constants observed in acetonitrile and ILs against the logarithmic viscosity of each solvent was ??0.84. However, the slope of the same plot was much steeper (??4.1) when data for only the three ILs were used. Detailed analyses of the experimental results on the basis of the Latner–Levin cross relation and the Marcus theory lead to the conclusion that the solvent properties such as the dielectric constant and refractive index around the polarized/charged transition states are different from those for the bulk ILs: observed self-exchange rate constants did not exhibit the Pekar factor dependence when dielectric constants and refractive indices for bulk ILs are used.     

Evolution of Kondo resonance from a single impurity molecule to the two-dimensional lattice

The successive spectral evolution of the Kondo resonance state was investigated from a single iron(II) phthalocyanine molecule to the two-dimensional lattice on Au(111) by interrogating the individual molecules with a scanning tunneling microscope. A sharp Kondo peak appears in the single-impurity regime, which broadens and splits as the lattice builds up. The origin of spectral evolution together with the electronic ground state of the lattice are discussed based on the competition of the Kondo effect and Rudermann-Kittel-Kasuya-Yosida coupling between the molecular spins.     

Accurate LC-MS analyses for microcystins using per-15N-labeled microcystins

Per-¹⁵N-labeled microcystins were prepared for use as surrogates for accurate liquid chromatography–mass spectrometry analysis. Two strains of Microcystis aeruginosa were cultured in ¹⁵NO₃-containing TS-15 medium. To change from the incorporation of ¹⁴N to ¹⁵N into all cell components, cells of Microcystis aeruginosa were precultured in Na¹⁵NO₃-containing medium for more than 6 months. After mass cultivation of the strains, cells of each strain were harvested and lyophilized. Microcystin variants were extracted from the lyophilized cells and per-¹⁵N-labeled microcystin variants were purified using high-performance liquid chromatography and high-performance thin-layer chromatography. The structures of per-¹⁵N-labeled microcystin variants were confirmed by their mass spectrometry spectra and NMR spectra. When per-¹⁵N-labeled microcystins were used as surrogates for quantitative analysis of these toxins in cyanobacterial cells, excellent accuracy (98–106%) was obtained, with the m/z of M⁺, [M+1]⁺, and [M+2]⁺ of both microcystins and the per-¹⁵N-labeled microcystins as surrogates being completely separated. In conclusion, per-¹⁵N-labeled microcystins are excellent surrogates for microcystin analysis using liquid chromatography–mass spectrometry.     

Solid‐phase Total Synthesis of (−)‐Apratoxin A and Its Analogues and Their Biological Evaluation

Two approaches for the solid‐phase total synthesis of apratoxin A and its derivatives were accomplished. In synthetic route A, the peptide was prepared by the sequential coupling of the corresponding amino acids on trityl chloride SynPhase Lanterns. After cleavage from the polymer‐support, macrolactamization of 10 , followed by thiazoline formation, provided apratoxin A. This approach, however, resulted in low yield because the chemoselectivity was not sufficient for the formation of the thiazoline ring though its analogue 33 was obtained. However, in synthetic route B, a cyclization precursor was prepared by solid‐phase peptide synthesis by using amino acids 13 – 15 and 18 . The final macrolactamization was performed in solution to provide apratoxin A in high overall yield. This method was then successfully applied to the synthesis of apratoxin analogues. The cytotoxic activity of the synthetic derivatives was then evaluated. The epimer 34 was as potent as apratoxin A, and O‐methyl tyrosine can be replaced by 7‐azidoheptyl tyrosine without loss of activity. The 1,3‐dipolar cycloaddition of 38 with phenylacetylene was performed in the presence of a copper catalyst without affecting the thiazoline ring.     

Design and synthesis of a novel fluorescent protein probe for easy and rapid electrophoretic gel staining by using a commonly available UV‐based fluorescent imaging system

A new fluorescent molecular probe, methyl 3‐(3,5‐bis((bis(pyridin‐2‐ylmethyl)amino)‐methyl)‐4‐hydroxyphenyl)‐2‐(5‐(dimethylamino)naphthalene‐1‐sulfonamido) propanoate, dizinc(II) chloride salt (Dansyl‐ 1 ‐Zn(II)), which possesses Zn(II) complexes and a dansyl group, was designed and synthesized to enable the detection of proteins in solution and in high‐throughput electrophoresis by using a UV‐based detection system. Dansyl‐ 1 ‐Zn(II) exhibited weak fluorescence in the absence of proteins and strong green fluorescence at approximately 510 nm in the presence of BSA upon irradiation with light at a wavelength of 345 nm. Compared with conventional protocols for in‐gel SDS‐PAGE protein staining (e.g. silver staining, SYPRO Ruby, and Oriole), the operating times of which range from 90 min to overnight, Dansyl‐ 1 ‐Zn(II) allowed 1‐step protein staining (SDS‐PAGE →Staining →Detection) and shortened the operating time (35 min) with high sensitivity (LOD: 1 ng or less) under 312‐nm or 365‐nm light excitation with orange or red emission filters, respectively. Moreover, Dansyl‐ 1 ‐Zn(II) was successfully applied to protein identification by MS via in‐gel tryptic digestion, Western blotting, and Native‐PAGE. Accordingly, Dansyl‐ 1 ‐Zn(II) may facilitate highly sensitive and high‐throughput protein detection, and it may be widely applicable as a convenient tool in various scientific and medical fields.     

Investigation of adsorption behavior and energy transfer of cationic porphyrins on clay surface at low loading levels by picosecond time-resolved fluorescence measurement

Time-resolved fluorescence and steady-state spectroscopic measurements were performed with +4-charged cationic porphyrins adsorbed on an anionic-type clay (Sumecton SA; SSA) surface at a low molecular loading level (10 % vs. cation-exchange capacity of clay) corresponding to an occupied area of ca 50 nm² per molecule. Absorption spectra indicated no interaction between transition moments of the porphyrins on the clay surface. An efficient energy-transfer process from donor to acceptor porphyrin was observed on the clay surface even under low porphyrin loading conditions. The efficiency of energy transfer obtained from the steady-state measurement was 65 %. Real-time behavior of the porphyrins was successfully captured during energy transfer. The rate constant of the energy transfer obtained from time-resolved fluorescence measurements was found to be 5.3 × 10⁸ s^?1. According to the efficiency and the rate constant, it is proposed that the adsorbed porphyrins did not have a uniform and fixed distribution.     

Molecular Recognition by Cyclophane/Guanidinium Supramolecular Receptor Embedded at the Air-Water Interface

In order to develop a supramolecular receptor through a self-assembling process, a site-specific host and an inclusion-type host were mixed as a Langmuir monolayer, and guest binding and pressure-induced fluorescence emission were investigated. A guanidinium amphiphile and several cyclophanes carrying hydrophobic moieties were used as the host molecules; molecular recognition of an aqueous fluorescent guest, 6-p-toluidino-2-naphthalenesulfonic acid (TNS) by binary mixed receptor monolayers was evaluated by a surface pressure-molecular area (π-A) isotherm and a surface fluorescence measurement. An apparent increase in fluorescence intensity was observed when the mixed monolayers of the guanidinium and cyclophane amphiphiles were compressed on an aqueous TNS solution. In contrast, single-component monolayers of the guanidinium or the cyclophane did not show a significant increase in fluorescence emission. In the mixed monolayers, the guest TNS would be bound to the interface by strong electrostatic interaction with the guanidinium, and inclusion of the formed complex probably suppresses the quenching effect in polar medium and/or self-quenching. Experiments with various mixing ratios of these components suggest selective formation of an equimolar cooperative receptor of the guanidinium and the cyclophane. Investigation of the cyclophane structures by fluorescence emission and a competitive binding experiment with another guest were also carried out.