Temperature measurements using fiber optic polarization interferometer

A novel measurement method of temperature based on the phenomena that the phase difference between principle polarization states in the optical retarder is function of temperature is described. The polarization state of optical beam is changed as it passes through the optical retarder, which depends on the temperature. The temperature of optical retarder is determined by comparison of the power difference between principal polarization states. We demonstrate successfully the temperature measurement by using a polarization maintaining fiber as the optical retarder. With a 100 mm length of the fiber optic retarder, the change rate of phase difference on temperature was 0.236 rad/°C and the measurement error was ±0.038°C over the temperature range of −2.6 – +3.4°C. With a 11.5 mm length of the fiber optic retarder, the change rate of phase difference on temperature was 0.021 rad/°C and the measurement error was ±0.79°C over the temperature range of −8.5 – +86.5°C.     

Directed Motion of a Molecular Motor Based on the Four-State Model with Unequal Substeps

A periodic one-dimensional four-state hopping model is proposed. In the model, the substeps betweenarbitrary adjacent states are unequal, and an explicit solution of the master equation is first obtained for the probabilitydistribution as a function of the time and position for any initial distribution with all the transients included. Next, thetransient behaviors in the initial period of time and the characteristic time to reach the steady state for the molecularmotor are discussed. Finally, we compare the steady state results to experiments and illustrate qualitatively the kineticbehaviors of a molecular motor under external load F.     

Approximate confidence limits of the reliability performances for a cold standby series system

This paper is to investigate the approximate confidence limits of the reliability performances (such as failure rate, reliability function and average life) for a cold standby series system. The Bayesian approximate upper confidence limit of failure rate is obtained firstly, and next Bayesian approximate lower confidence limits for reliability function and average life are presented. The expressions for calculating Bayesian lower confidence limits of the reliability function and average life are also obtained, and an illustrative example is examined numerically by means of the Monte-Carlo simulation. Finally, the accuracy of confidence limits is discussed.     

Quantum Dynamics of Systems Connected by a Canonical Transformation

Quantum Hamiltonian systems corresponding to classical systems related by a general canonical transformation are considered. The differential equation to find the unitary operator, which corresponds to the canonical transformation and connects quantum states of the original and transformed systems, is obtained. The propagator associated with their wave functions is found by the unitary operator. Quantum systems related by a linear canonical point transformation are analyzed. The results are tested by finding the wave functions of the under-, critical-, and over-damped harmonic oscillator from the wave functions of the harmonic oscillator, free-particle system, and negative harmonic potential system, using the unitary operator to connect them, respectively.     

数字全息中再现像分离问题的研究

详细分析了数字全息的再现像分离条件,指出数字全息和普通全息的再现像分离条件之间的区别,同时也讨论了再现条件对数字全息记录光路的要求,同时给出一种能部分避免再现像重叠的处理方法,并做出相应的实验验证.     

Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

Formation of p-type ZnO film on InP substrate by phosphor doping

ZnO thin film was initially deposited on InP substrate by radio frequency (rf) magnetron sputtering and the diffusion process was performed using the closed ampoule technique where Zn₃P₂ was used as the dopant source. To verify the junction formation of ZnO thin films, the electrical properties were measured, and the effects of Zn₃P₂ diffusion on ZnO thin films were investigated. It is observed that the electrical property of the film is changed from n-type to p-type by dopant diffusion effect. Based on the results, it is confirmed that ZnO thin films can be a potential candidate for ultraviolet (UV) optical devices.     

Effects of hysteretic and aerodynamic damping on supersonic panel flutter of composite plates

The governing equation for the finite element analysis of the panel flutter of composite plates including structural damping is derived from Hamilton's principle. The first order shear deformable plate theory has been applied to structural modelling so as to obtain the finite element eigenvalue equation. The unsteady aerodynamic load in a supersonic flow is computed by using the linear piston theory. The critical dynamic pressures for composite plates have been calculated to investigate the effects of structural damping on flutter boundaries. The effects are dependent on fiber orientation because flutter mode can be weak or strong in the fiber orientation of composite plates. Structural damping plays an important role in flutter stability with low aerodynamic damping but would not affect the flutter boundary with high aerodynamic damping.     

完全Rees矩阵半群的分解及性质

用等价关系Q^~出了完全Rees矩阵半群的一种分解．而且得到了它的每个Q^~一类的表示．     

Quantum wire heterostructure for optoelectronic applications

Quantum wire (QWR) heterostructures suitable for optoelectronic applications should meet a number of requirements, including defect free interfaces, large subband separation, long carrier lifetime, efficient carrier capture. The structural and opticl properties of GaAs/AlGaAs and InGaAs/GaAs quantum wire (QWR) heterostructures grown by organometallic chemical vapor deposition on nonplanr substrates, which satisfy many of these criteria, are described. These crescent-shaped QWRs are formed in situ during epitaxial growth resulting in virtually defect free interfaces. Effective wire widths as small as 10nm have been achieved, corresponding to electron subband separations greater than K_BT at room temperature. The enhanced density of states at the QWR subbands manifests itself in higher optical absorption and emission as visualized in photoluminescence (PL), PL excitation, amplified spontaneous emission and lasing spectra of these structures. Effective carrier capture into the wires via connected quantum well regions, which is important for enhancing the otherwise extremely small capture cross section of these wires, has also been observed. Room temperature operation of GaAs/AlGaAs and strained InGaAs/GaAs QWR lasers with threshold currents as low as 0.6mA has been demonstrated.