Combustion and thermal properties of paper honeycomb

The honeycomb structure has superior compressive strength so that it is being utilized in various fields. In addition, the paper honeycomb has excellent economic feasibility because of its low production cost and has an environment-friendly advantage because its recycling is possible. Securing of flame retardant performance is essential to use it as interior materials of buildings and fireproof doors using the advantage like this. The present research has evaluated combustion and thermal properties according to flame retardant treatment in terms of two kinds of specimens when flame retardant film is attached to paper honeycomb, and when paper honeycomb is impregnated to flame retardant agents. As a result of evaluating flame retardant performance utilizing a cone calorimeter, the case impregnated into flame retardant agents showed the most superior flame retardant performance. Through this result, it was confirmed that the paper honeycomb can be utilized as interior materials of buildings though improvement of flame retardant performance.     

Thermally modulated multilayered graphene oxide for hydrogen storage

We have obtained high pressure H(2) isotherms with respect to the interlayer distance of multilayered graphene oxide (GO) modulated by thermal annealing. The maximum storage capacity is 4.8 (0.5) wt% at 77 K (298 K) and at 9.0 MPa pressure. We found the optimum GO interlayer distance for maximum H(2) uptake at 6.5 ?, similar to the predicted distances from first-principles calculations for graphite materials. Our results reveal that multilayered GO can be a practical material of choice to allow the use of graphene as a hydrogen storage material, provided that only small amounts of O and OH functional groups exist as spacers on GO sheets.     

Wave breaking and global existence for the generalized periodic two-component Hunter–Saxton system

In this paper, we study the wave-breaking phenomena and global existence for the generalized two-component Hunter–Saxton system in the periodic setting. We first establish local well-posedness for the generalized two-component Hunter–Saxton system. We obtain a wave-breaking criterion for solutions and results of wave-breaking solutions with certain initial profiles. We also determine the exact blow-up rate of strong solutions. Finally, we give a sufficient condition for global solutions.     

Chronic mild stress decreases survival, but not proliferation, of new-born cells in adult rat hippocampus

New-born cells continue to proliferate and survive to become mature granule cells in adult rat hippocampus. Although this process, known as neurogenesis, is inhibited by acute stress, it is not clear whether chronic stress affects neurogenesis. To determine whether chronic mild stress (CMS) influences neurogenesis in the adult rat hippocampus, male Sprague-Dawley rats were exposed to CMS and administered bromodeoxyuridine (BrdU) before or after CMS to observe the survival/differentiation or proliferation of new-born cells, respectively. In addition, we measured brain-derived neurotrophic factor (BDNF) mRNA in the granule cell layer (GCL) of the hippocampus, because BDNF is known to play an important role in the survival of new-born cells. CMS significantly decreased the survival of new-born cells in the GCL, but did not influence the proliferation or differentiation of new-born cells. CMS did not affect the proliferation and survival of new-born cells in the hilus. In addition, CMS did not change BDNF mRNA levels in the GCL. These results demonstrate that CMS reduces the survival of new-born cells but not of their proliferation, suggesting that repeated mild stress could influence a part of neurogenesis, but not the whole part of neurogenesis. These results raise the possibility that the survival of new-born cells may be suppressed in the presence of normal BDNF mRNA levels in GCL.     

New cavitand derivatives bearing four coumarin groups as fluorescent chemosensors for Cu and recognition of dicarboxylates utilizing Cu complex

New cavitand derivatives (1, 2) bearing four coumarin groups were synthesized, and the binding properties of these cavitands towards metal ions were examined through their fluorescent changes. Cavitand 1 effectively recognized the Cu²⁺ ions among the metal ions examined. The recognition of cavitand 1-Cu²⁺ with dicarboxlyates is also described.     

Effect of orbital rotation and mixing on the optical properties of orthorhombic RMnO3 (R=La, Pr, Nd, Gd, and Tb)

We investigated the ab-plane absorption spectra of RMnO3 (R=La, Pr, Nd, Gd, and Tb) thin films. As the ionic radius of the R ion decreases, we observed a drastic suppression of the 2 eV peak, i.e., the intersite optical transition between spin- and orbital-aligned states across the Mott gap. We found that, in addition to orbital rotation, orbital mixing in the orbital-ordered state should play an important role in the suppression of 2 eV peak. We also found that the spectral weight of 2 eV peak is proportional to the A-type antiferromagnetic ordering temperature, which suggests that the magnetic interaction should be sensitively coupled to the orbital degree of freedom.     

An electrical impedance spectroscopic (EIS) study on transport characteristics of ion-exchange membrane systems

This study aimed at investigating ion-exchange membrane systems using impedance spectroscopy. Nyquist plots showed that the impedance obtained in this study described the ion-exchange membrane system well, as consisting of (i) an ion-exchange membrane immersed in solution, (ii) electrical double layers at the membrane surface, and (iii) diffusion boundary layers arising from the interface between the ion-exchange membrane and the electrolyte solutions. Taking into account the physical and electrochemical understanding of the ion-exchange membrane system, an equivalent circuit was suggested to quantitatively analyze each component of the ion-exchange membrane system. To confirm the reliability of the proposed equivalent circuit, the resistance and capacitance were estimated from the impedance data and the values were compared with other experimental results (e.g., I-V curves). The comparison showed good agreement and validated the equivalent circuit. Moreover, the impedance measurements made it possible to confirm the electroconvective effects in the over LCD region.     

An approach to fouling characterization of an ion-exchange membrane using current-voltage relation and electrical impedance spectroscopy

Fouling phenomena of an anion-exchange membrane by bovine serum albumin (BSA) were investigated using current-voltage relation and electrical impedance spectroscopy (EIS) in this study. Electrochemical parameters of the Neosepta CMX cation- and AMX anion-exchange membrane (Tokuyama Corp., Japan) such as limiting current density (LCD), transport number, plateau length, and fraction of the conducting phase were measured. Fraction of the conducting phase of the ion-exchange membranes, calculated from the modified Sand equation, played an important role in determining the electrochemical parameters in the presence of foulants such as BSA. Fraction of the conducting phase of the AMX membrane significantly decreased in the presence of BSA. Two distinguishable slopes were observed in the over-LCD region of the current-voltage (I-V) curve, indicating the change of resistance. To further elucidate the phenomena, the electrical impedance spectroscopic study was carried out using the offset alternating current. It was found that the negatively charged loose fouling layer changed to the dense deposited BSA on the surface of the AMX membrane occurring along with enhanced water dissociation phenomena at the surface of the fouled AMX membrane at a higher current density. This result was confirmed by water dissociation experiments in a six-compartment electrodialysis cell.     

Nanoflow liquid chromatography-tandem mass spectrometry for the characterization of intact phosphatidylcholines from soybean, bovine brain, and liver

Nanoflow liquid chromatography-electrospray ionization tandem-mass spectrometry (nanoLC-ESI-MS-MS) was applied for the characterization of intact phosphatidylcholine (PC) lipid molecules using a homemade reversed phase capillary column with a pulled tip for direct ESI at positive ion mode. Prior to the analytical column, a short capillary trapping column was utilized for on-line pre-concentration via microcross connection. Separation of intact phosphatidylcholines in the nanoflow LC column was carried out using a binary gradient elution method at 300 nL/min. The structures of the eluted PC components were determined by analysis of the typical fragment ions of PC molecules obtained from collision-induced dissociation (CID) after each precursor scan in mass spectrometry. In the current study, nanoflow LC-ESI-MS-MS analysis of PC molecules demonstrated the ability to obtain clear structural information, such as alkyl chain lengths and the degree of unsaturation with a protonated molecule ([M + H]+) and its characteristic fragment ions ([M + H-RCH2COOH]+, [M + H-RCH=C=O]+, and [M + H-184]+). Results from the nanoflow LC-ESI-MS experiment showed the limit of detection at 3.5 fmol for the 14:0/14:0-PC standard. This technique then was applied to intact PC extracts from soybean, bovine brain, and liver without derivatization and resulted in the identification of 28, 25, and 39 phosphatidylcholines, respectively. The LC-MS-MS method has been shown to be useful for the analysis of low concentration PC molecules in biological samples.     

A new class of SN2 reactions catalyzed by protic solvents: Facile fluorination for isotopic labeling of diagnostic molecules

Aprotic solvents are usually preferred for the SN2 reactions, because nucleophilicity and hence SN2 reactivity are severely retarded by the influence of the partial positive charge of protic solvents. In this work, we introduce a remarkable effect of using tertiary alcohols as a reaction medium for nucleophilic fluorination with alkali metal fluorides. In this novel synthetic method, the nonpolar protic tert-alcohol enhances the nucleophilicity of the fluoride ion dramatically in the absence of any kind of catalyst, greatly increasing the rate of the nucleophilic fluorination and reducing formation of byproducts (such as alkenes, alcohols, or ethers) compared with conventional methods using dipolar aprotic solvents. The great efficacy of this method is a particular advantage in labeling radiopharmaceuticals with [18F]fluorine (t1/2 = 110 min) for positron emission tomographic (PET) imaging, and it is illustrated by the synthesis of four [18F]fluoride-radiolabeled molecular imaging probes-[18F]FDG, [18F]FLT, [18F]FP-CIT, and [18F]FMISO-in high yield and purity and in shorter times compared to conventional syntheses.