薄层色谱法在香兰素合成中的应用

应用薄层色谱法对愈创木酚、3－甲氧基－4－羟基扁桃酸和香兰素进行了分析，以硅胶GF254作为吸附剂，从几种溶剂系统中选出氯仿：乙酸乙酯：正丙醇：冰乙酸：水＝20：1：1：1：2溶液作为展开剂。建立了 香兰素的薄层扫描定量分析方法，测定波长为500nm，参比波长为570nm，线性范围为0．31－6．2μg。     

基于“超星直播+学习通”的在线教学示范

为了应对新冠病毒肺炎(COVID-19)蔓延和响应教育部"停课不停教,停课不停学"的号召,作者从"两问题三误区"入手分析了现有在线教学存在的问题,并对比了不同直播平台的优缺点,提出了在线教学的具体教学建议。以基于"超星直播+学习通"的在线教学为例进行了教学示范指导。     

Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique

A new Fe(III)-imprinted amino-functionalized silica gel sorbent was prepared by a surface imprinting technique for selective solid-phase extraction (SPE) of Fe(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher selectivity and adsorption capacity for Fe(III). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Fe(III) was 25.21 and 5.10 mg g⁻¹, respectively. The largest selectivity coefficient of the Fe(III)-imprinted sorbent for Fe(III) in the presence of Cr(III) was over 450. The relatively selective factor (α_r) values of Fe(III)/Cr(III) were 49.9 and 42.4, which were greater than 1. The distribution ratio (D) values of Fe(III)-imprinted polymers for Fe(III) were greatly larger than that for Cr(III). The detection limit (3σ) was 0.34 μg L⁻¹. The relative standard deviation of the method was 1.50% for eight replicate determinations. The method was validated by analyzing two certified reference materials (GBW 08301 and GBW 08303), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace iron in plants and water samples with satisfactory results.     

有机试剂结构与性质的研究XII有机试剂的pKa与改进的Swain－Lupton参数

有机试剂的ｐＫ０ａ是其重要的物化参数，它是有机试剂酸碱性的度量，决定其配合物的稳定性．根据Ｓｗａｉｎ－Ｌｕｐｔｏｎ的工作，每个取代基的效应可用两个参数：场／诱导效应参数与共振效应参数来描述．本文应用Ｈａｎｓｃｈ改进的参数值研究了ｐＫａ与取代基常数的相关性，建立了下式．ｐＫａ＝ｐＫ０ａ＋ｒ１Ｆ＋ｒ２Ｒ     

Biopolymer and carbon nanotubes interface prepared by self-assembly for studying the electrochemistry of microperoxidase-11

Stable films of biopolymer chitosan and carbon nanotubes were prepared by a layer-by-layer self-assembly technique. Atomic force microscopy, scanning electron microscopy, cyclic voltammetry, and UV-vis spectroscopy were used to characterize the film assembly. Atomic force microscopy and scanning electron microscopy showed that an even, stable film was formed. The UV-vis spectroscopy and cyclic voltammetry study indicated the uniform growth of the film. The property of the self-assembled multilayer film in promoting protein electron transfer was demonstrated by incorporating microperoxidase-11 in the film. Microperoxidase-11 in the multilayer film could transfer electrons with the electrode indicating that carbon nanotubes could wire the protein to the electrode. The electrocatalytic activity of the microperoxidase-11 containing multilayer film-modified electrode toward H(2)O(2) and O(2) was investigated. The results showed that along with the increase in the assembled layers the electrocatalytic reduction potentials of H(2)O(2) and O(2) shifted positively. The prepared multilayer film of chitosan and carbon nanotubes containing protein was a sensitive interface for electrocatalytic study.     

含金鸡纳碱的光活性聚合物──Ⅰ．金鸡纳碱／丙烯酰胺共聚物的合成与表征

研究了金鸡纳碱与丙烯酰胺的自由基共聚反应。发现在氯仿／乙醇混合溶剂中采用硫酸奎宁作为金鸡纳碱共聚单体可以合成收率和金鸡纳碱含量均较高的新型水溶性共聚物。对共聚物用元素分析、核磁共振、粘度和旋光度测定等方法进行表征，发现在假定丙烯酰胺链节为非光活性的条件下共聚物中金鸡纳碱链节的比旋光度随聚合配方中金鸡纳碱含量的增加而增加。     

Dual‐Amplification of Antigen–Antibody Interactions via Backfilling Gold Nanoparticles on (3‐Mercaptopropyl) Trimethoxysilane Sol‐Gel Functionalized Interface

A new dual‐amplification strategy of electrochemical signaling from antigen–antibody interactions was proposed via backfilling gold nanoparticles on (3‐mercaptopropyl) trimethoxysilane sol‐gel (MPTS) functionalized interface. The MPTS was employed not only as a building block for the electrode surface modification but also as a matrix for ligand functionalization with first amplification. The second signal amplification strategy introduced in this study was based on the backfilling immobilization of nanogold particles to the immunosensor surface. Several coupling techniques, such as with nanogold but not MPTS or with MPTS but not nanogold, were investigated for the determination of carcinoembryonic antigen (CEA) as a model, and a very good result was obtained with nanogold and MPTS coupling immunosensor. With the noncompetitive format, the formation of the antigen–antibody complex by a simple one‐step immunoreaction between the immobilized anti‐CEA and CEA in sample solution introduced membrane potential change before and after the antigen–antibody interaction. Under optimal conditions, the proposed immunosensor exhibited a good electrochemical behavior to CEA in a dynamic concentration range of 4.4 to 85.7 ng/mL with a detection limit of 1.2 ng/mL (at 3 δ). Moreover, the precision, reproducibility and stability of the as‐prepared immunosensor were acceptable. Importantly, the proposed methodology would be valuable for diagnosis and monitoring of carcinoma and its metastasis.     

Effect of additives on the stereochemical integrity and reactivity of alpha-alkoxycarbonyl alkenylcopper intermediates. Optimal conditions for the synthesis of isomerically pure tetrasubstituted alkenes

A systematic study on the effect of additives on the isomerizability of 1-alkoxycarbonyl alkenylcopper(I) intermediates revealed that the lithium chelator 12-crown-4 is significantly more efficient than HMPA at retarding isomerization. On the other hand, 12-crown-4 alone is unable to promote effective coupling with alkyl halides. The combination of 12-crown-4 and a reduced amount of HMPA, however, led to an improved procedure for the preparation of useful, isomerically pure tetrasubstituted alkenes such as allylation reagents and skipped dienes.     

Synthetic enantiopure aziridinomitosenes: preparation, reactivity, and DNA alkylation studies

An enantiocontrolled route to aziridinomitosenes had been developed from l-serine methyl ester hydrochloride. The tetracyclic target ring system was assembled by an internal azomethine ylide cycloaddition reaction based on silver ion-assisted intramolecular oxazole alkylation and cyanide-induced ylide generation via a labile oxazoline intermediate (62 to 66). Other key steps include reductive detritylation of 26, methylation of the N-H aziridine 56, oxidation of the sensitive cyclohexenedione 68 to quinone 70, and carbamoylation using Fmoc-NCO. Although the aziridinomitosene tetracycle is sensitive, a range of protecting group manipulations and redox chemistry can be performed if suitable precautions are taken. A study of DNA alkylation by the first C-6,C-7-unsubstituted aziridinomitosene 11a has been carried out, and evidence for DNA cross-link formation involving nucleophilic addition to the quinone subunit is described.