Tailoring the trajectory of cell rolling with cytotactic surfaces

Cell separation technology is a key tool for biological studies and medical diagnostics that relies primarily on chemical labeling to identify particular phenotypes. An emergent method of sorting cells based on differential rolling on chemically patterned substrates holds potential benefits over existing technologies, but the underlying mechanisms being exploited are not well characterized. In order to better understand cell rolling on complex surfaces, a microfluidic device with chemically patterned stripes of the cell adhesion molecule P-selectin was designed. The behavior of HL-60 cells rolling under flow was analyzed using a high-resolution visual tracking system. This behavior was then correlated to a number of established predictive models. The combination of computational modeling and widely available fabrication techniques described herein represents a crucial step toward the successful development of continuous, label-free methods of cell separation based on rolling adhesion.     

Robust and efficient amide-based nonheme manganese(III) hydrocarbon oxidation catalysts: substrate and solvent effects on involvement and partition of multiple active oxidants

Two new mononuclear nonheme manganese(III) complexes of tetradentate ligands containing two deprotonated amide moieties, [Mn(bpc)Cl(H₂O)] ( 1 ) and [Mn(Me₂bpb)Cl(H₂O)] ? CH₃OH ( 2 ), were prepared and characterized. Complex 2 has also been characterized by X‐ray crystallography. Magnetic measurements revealed that the complexes are high spin (S=5/2) Mn^III species with typical magnetic moments of 4.76 and 4.95 μ_B, respectively. These nonheme Mn^III complexes efficiently catalyzed olefin epoxidation and alcohol oxidation upon treatment with MCPBA under mild experimental conditions. Olefin epoxidation by these catalysts is proposed to involve the multiple active oxidants Mn^V?O, Mn^IV?O, and Mn^III? OO(O)CR. Evidence for this approach was derived from reactivity and Hammett studies, KIE (k_H/k_D) values, H₂¹⁸O‐exchange experiments, and the use of peroxyphenylacetic acid as a mechanistic probe. In addition, it has been proposed that the participation of Mn^V?O, Mn^IV?O, and Mn^III? OOR could be controlled by changing the substrate concentration, and that partitioning between heterolysis and homolysis of the O? O bond of a Mn‐acylperoxo intermediate (Mn? OOC(O)R) might be significantly affected by the nature of solvent, and that the O? O bond of the Mn? OOC(O)R might proceed predominantly by heterolytic cleavage in protic solvent. Therefore, a discrete Mn^V?O intermediate appeared to be the dominant reactive species in protic solvents. Furthermore, we have observed close similarities between these nonheme Mn^III complex systems and Mn(saloph) catalysts previously reported, suggesting that this simultaneous operation of the three active oxidants might prevail in all the manganese‐catalyzed olefin epoxidations, including Mn(salen), Mn(nonheme), and even Mn(porphyrin) complexes. This mechanism provides the greatest congruity with related oxidation reactions by using certain Mn complexes as catalysts.     

Simple sample transfer technique by internally expanded desorptive flow for needle trap devices

Needle trap devices (NTDs) are improving in simplicity and usefulness for sampling volatile organic compounds (VOCs) since their first introduction in early 2000s. Three different sample transfer methods have been reported for NTDs to date. All methods use thermal desorption and simultaneously provide desorptive flow to transfer desorbed VOCs into a GC separation column. For NTDs having 'side holes', GC carrier gas enters a 'side hole' and passes through sorbent particles to carry desorbed VOCs, while for NTD not having a 'side hole', clean air as desorptive flow can be provided through a needle head by a air tight syringe to sweep out desorbed VOCs or water vapor has been reported recently to be used as desorptive flow. We report here a new simple sample transfer technique for NTDs, in which no side holes and an external desorptive flow are required. When an NTD enriched by a mixture of benzene, toluene, ethylbenzene, and xylene (BTEX) or n-alkane mixture (C6-C15) is exposed to the hot zone of GC injector, the expanding air above the packed sorbent transfers the desorbed compounds from the sorbent to the GC column. This internal air expansion results in clean and sharp desorption profiles for BTEX and n-alkane mixture with no carryover. The effect of desorption temperature, desorption time, and overhead volumes was studied. Decane having vapor pressure of approximately 1 Torr at 20 degrees C showed approximately 1% carryover at the moderate thermal desorption condition (0.5 min at 250 degrees C).     

Development of naphtho[1,2-b:5,6-b']dithiophene based novel small molecules for efficient bulk-heterojunction organic solar cells

Two new small molecules with a rigid planar naphtho[1,2-b:5,6-b']dithiophene (NDT) unit were designed and synthesized. Solution processed bulk-hetereojunction organic solar cells based on blends of the small molecules and [6,6]-phenyl-C(71)-butyric acid methyl ester (PC(71)BM) exhibited promising photovoltaic device performance with a maximum power conversion efficiency up to 2.20% under the illumination of AM 1.5G, 100 mW cm(-2).     

Simultaneous sampling and analysis of indoor air infested with Cimex lectularius L. (Hemiptera: Cimicidae) by solid phase microextraction,thin film microextraction and needle trap device

Air in a room infested by Cimex lectularius L. (Hemiptera: Cimicidae) was sampled simultaneously by three different sampling devices including solid phase microextraction (SPME) fiber coatings, thin film microextraction (TFME) devices, and needle trap devices (NTDs) and then analyzed by gas chromatography–mass spectrometry (GC–MS). The main focus of this study was to fully characterize indoor air by identifying compounds extracted by three different microextraction formats and, therefore, perform both the device comparison and more complete characterization of C. lectularius pheromone. The NTD technique was capable of extracting both (E)-2-hexenal and (E)-2-octenal, which were previously identified as alarm pheromones of bedbugs, and superior NTD recoveries for these two components allowed reliable identification based on mass spectral library searching and linear temperature programmed retention index (LTPRI) technique. While the use of DVB/CAR/PDMS SPME fiber coatings provided complementary sample fingerprinting and profiling results, TFME sampling devices provided discriminative extraction coverage toward highly volatile analytes. In addition to two alarm pheromones, relative abundances of all other analytes were recorded for all three devices and aligned across all examined samples, namely, highly infested area, less infested area, and control samples which were characterized by different bedbug populations. The results presented in the current study illustrate comprehensive characterization of infested indoor air samples through the use of three different non-invasive SPME formats and identification of novel components comprising C. lectularius pheromone, therefore, promising future alternatives for use of potential synthetic pheromones for detection of infestations.     

Frequency-selective absorbance detection: Refractive index and turbidity compensation with dual-wavelength measurement

A frequency-selective absorbance detection approach and its applications are described. First, a digital signal processor-lock-in amplifier (DSP-LIA)-based absorbance detector was evaluated. Compared to a simple operational amplifier (TL082CP)-based detector, the DSP-LIA-based detector showed lower noise levels, but the relative advantage was reduced under very low photocurrent levels (down to few nA). A 7 cm pathlength flow cell with this commercial LIA-based detector exhibited excellent Beer's law linearity (r² = 0.9999) and a noise level of 7 micro absorbance units (μAU). The limit of detection (LOD, S/N = 3) for methyl orange (MO) was 7 nM with this detector. Finally, as a more affordable alternative to an LIA, a balanced demodulator integrated circuit chip was used to fabricate a dual wavelength-frequency-selective LED-based absorbance detector. This device successfully compensated refractive index (RI) effect and turbidity effect in test flow systems. The LOD for MO with this system was 8 nM.     

Tomographic imaging of a suspending single live cell using optical tweezer-combined full-field optical coherence tomography

We propose a label-free depth-resolved tomographic scheme for imaging a single live cell in fluid. This approach utilizes a modified time-domain full-field optical coherence tomography (FF-OCT) system combined with an optical tweezer technique. The optical trap for holding a moving specimen is made by tightly focusing a 1064 nm Q-switching pulsed laser beam with a 1.0 NA microscope objective in the sample arm of the FF-OCT part. By cosharing the probe for both systems, the optical actions of trapping and cellular resolution tomographic imaging could be achieved simultaneously. Feasibility of the combined system is demonstrated by imaging micron-sized polystyrene beads and a living suspension cell in medium.     

Mercaptoamine-assisted Post-encapsulation of Metal Nanoparticles within Preformed Zeolites and their Analogues for Hydroisomerization and Methane Decomposition

We report a general synthetic strategy for post-encapsulation of metal nanoparticles within preformed zeolites using post-synthetic modification. Both anionic and cationic precursors to metal nanoparticle are supported on 8- and 10-membered ring zeolites and analogues during wet impregnation using 2-aminoethanethiol (AET) as a bi-grafting agent. Thiol groups are coordinated to metal centers, whereas amine moieties are dynamically attached to micropore walls via acid-base interactions. The dynamic acid-base interactions cause the even distribution of the metal-AET complex throughout the zeolite matrix. These processes encapsulate Au, Rh, and Ni precursors within the CHA, *MRE, MFI zeolite, and SAPO-34 zeolite analogues, for which small channel apertures preclude the post-synthesis impregnation of metal precursors. Sequential activation forms small and uniform nanoparticles (1–2.5 nm in diameter), as confirmed through electron microscopy and X-ray absorption spectroscopy. Containment within the small micropores protected the nanoparticles against harsh thermal sintering conditions and prevented the fouling of the metal surface by coke, thus resulting in a high catalytic performance in n-dodecane hydroisomerization and methane decomposition. The remarkable specificity of the thiol to metal precursors and the dynamic acid-base interaction make these protocols extendable to various metal-zeolite systems, suitable for shape-selective catalysts in challenging chemical environments.