Pseudopartial wetting and precursor film growth in immiscible metal systems

We explore the equilibrium wetting behavior and precursor film growth in pure and alloy metallic systems. The systems exhibit equilibrium "pseudopartial" wetting, that is, a thin film in equilibrium with a nonzero contact angle in both liquid and solid states. The film spreading kinetics clearly indicates a diffusive transport mechanism. The alloying has only a small impact on the equilibrium wetting properties but strongly affects the transport during the growth of the precursor film.     

Click chemistry to construct fluorescent oligonucleotides for DNA sequencing

"Click chemistry" 1,3-dipolar cycloaddition between alkynyl 6-carboxyfluorescein (FAM) and azido-labeled single-stranded (ss) DNA was carried out under aqueous conditions to produce FAM-labeled ssDNA in quantitative yield. The FAM-labeled ssDNA was successfully used as a primer to produce DNA sequencing products with single-base resolution in a capillary electrophoresis DNA sequencer with laser-induced fluorescence detection.     

Improved expression by cytomegalovirus promoter/enhancer and behavior of vascular endothelial growth factor gene after myocardial injection of naked DNA

Direct injection of the vascular endothelial growth factor (VEGF) gene plasmid DNA into the myocardium was shown to induce development of new blood vessels to increase the circulation in the heart of patients with coronary artery diseases. However, such angiogenic gene therapy (via naked DNA) was limited by low level of gene expression. Furthermore, the temporal and spatial characteristics of VEGF gene transfer in the heart are not known. In this study, we demonstrated that a plasmid vector, containing the human cytomegalovirus immediate early (HCMV IE) promoter and enhancer, induces greater expression of gene in the rat heart monitored by gene fused to the chloramphenicol acetyl transferase (CAT) reporter, than four different viral and cellular promoters. Interestingly, expression of VEGF121 protein showed an earlier peak, a shorter duration, and a wider distribution than that of CAT only. Therefore, a plasmid vector with an HCMV IE promoter/enhancer provides clear advantages over other previously developed plasmids. Furthermore, expression profile of VEGF121 gene may provide useful information in the design of angiogenic gene therapy in the heart.     

Hydrodynamic microfabrication via"on the fly" photopolymerization of microscale fibers and tubes

A microfluidic apparatus capable of creating continuous microscale cylindrical polymeric structures has been developed. This system is able to produce microstructures (e.g. fibers, tubes) by employing 3D multiple stream laminar flow and "on the fly"in-situ photopolymerization. The details of the fabrication process and the characterization of the produced microfibers are described. The apparatus is constructed by merging pulled glass pipettes with PDMS molding technology and used to manufacture the fibers and tubes. By controlling the sample and sheath volume flow rates, the dimensions of the microstructures produced can be altered without re-tooling. The fiber properties including elasticity, stimuli responsiveness, and biosensing are characterized. Responsive woven fabric and biosensing fibers are demonstrated. The fabrication process is simple, cost effective and flexible in materials, geometries, and scales.     

Synthesis and Structures of Titanosiloxane Cage Compounds

Reaction of (triphenylmethyl)silanetriol (1) with cyclopentadienyltitanium trichloride (CpTiCl₃) in the presence of triethylamine as a HCl scavenger gave both compounds of a partial open-cage type {[Ph₃CSiO(OH)]₃(Ph₃CSiO_3/2)(CpTiO_3/2)₄} (2) and cube type (Ph₃CSiO_3/2CpTiO_3/2)₄ (3). The 1:1 reaction of 1 and CpTiCl₃ in toluene solvent at reflux temperature for 3 d afforded compounds 2 (22%) and 3 (36%). When 1 is reacted with a 1.5 fold excess of CpTiCl₃ under the same conditions, compound 3 was obtained in high yield (81%) along with 2 in trace quantities. Compounds 2 and 3 were fully characterized by the analyses of ¹H, ¹³C, ²⁹Si NMR, IR, and FAB MS data. The solid-state structure of 3 was determined by a single crystal X-ray diffraction study. Compound 3 had shown to have catalytic activity for the oxidation of alkenes such as 1-octene, cyclooctene, and norbornene with t-butyl hydrogen peroxide. The effect of solvent was observed in this epoxidation reaction. The order of reactivity were decreased as follows: CHCl₃ > hexane THF.     

All-solid-state carbonate-selective electrode based on a molecular tweezer-type neutral carrier with solvent-soluble conducting polymer solid contact

Carbonate-selective membranes were prepared by incorporating a molecular tweezer-type carbonate-selective neutral carrier [N,N-dioctyl-3alpha,12alpha-bis(4-trifluoroacetylbenzyloxy)-5beta-cholan-24-amide] into a room temperature vulcanizing-type silicone rubber (3140 RTV-SR) matrix, and deposited on the planar-type electrodes (Pt containing Ag/AgCl electrodes formed on a ceramic plate) with and without an intermediary conducting polymer layer. Two types of solvent-soluble conducting polymers [poly(1-hexyl-3,4-dimethyl-2,5-pyrrolylene) or poly(3-octylthiophene-2,5-diyl)] have been examined as the solid contact material. Potentiometric properties of the resultant all-solid-state electrodes were evaluated in terms of their carbonate selectivity, response slope, potential stability and reproducibility. The sensitivity and carbonate selectivity of the SR membrane-based all-solid-state electrodes with conducting polymer solid contact were comparable to those of conventional electrodes. Experimental results also showed that the intermediary conducting polymer layer used in the all-solid-state electrodes greatly reduces the interference from dissolved oxygen.     

Catalytic degradation of polystyrene using HUSY catalysts

Summary The addition of carbon dioxide to phenyl glycidyl ether (PGE) was investigated in a semi-batch reactor using immobilized quaternary ammonium chloride catalysts. Five different catalysts were prepared with the following supports : (1) soluble poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC) [C1], (2) insoluble poly(ST-DVB-VBC) [C2], (3) macroporous poly(ST-DVB-VBC) [C3], (4) poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC)-MMT [C4] (5) modified MCM-41 [C5]. The addition of carbon dioxide to PGE can be considered as a pseudo-first order process with respect to the concentration of PGE. The pseudo-first order rate constant for the catalysts decreased in the series C1&gt;C3&gt;C2&gt;C4&gt;C5. The activation energy for C1 to C5 catalysts was 8.6, 20.9, 19.9, 23.9, and 26.8 kJ/mol, respectively. The immobilized catalysts can be reused in least 4 successive runs without any considerable loss of their initial reactivities.     

Independent exponential feeding of glycerol and methanol for fed-batch culture of recombinant Hansenula polymorpha DL-1

As a novel feeding strategy for aptomizing human epidermal growth factor (hEGF) production with a recombinant Hansenula polymorpha DL-1 using the methanol oxidase (MOX) promoter in H. polymorpha DL-1, independent exponential feeding of two substrates was used. A simple kinetic model considering the cell growth on two substrates was established and used to calculate the respective feeding rates of glycerol and methanol. In the fedbatch culture with methanol-only feeding, the optimal set point of specific growth rate on methanol was found to be 0.10 h⁻¹. When the fed-batch cultures were conducted by the independent feeding of glycerol and methanol, the actual specific growth rate on glycerol and methanol was slightly lower than the set point of specific growth rate. By the uncoupled feeding of glycerol and methanol the volumetric productivity of hEGF increased from 6.4 to 8.0 mg/(L·h), compared with methanol-only feeding.     

Analysis of urban dust (PM<Subscript>2</Subscript>/PM<Subscript>10-2</Subscript>) in Daejeon city by instrumental neutron activation analysis

Summary As part of an air pollution monitoring study, airborne particulate matter (PM₂/PM_10-2) samples were collected from 2000 to 2003 at two sampling sites in an urban region, Daejeon, the middle of Korea. Mass concentrations of both fine and coarse fractions and that of the black carbon in the fine particles were measured using the Gent stacked filter unit sampler and the smoke stain reflectometer, respectively. In the collected samples the concentrations of 24 elements were analyzed using instrumental neutron activation analysis. Monitored data were investigated for their temporal trends under different environmental conditions and their seasonal correlation patterns. Crustal enrichment factors were also estimated to establish the contribution between anthropogenic and crustal origin. Patterns for airborne particle matter (APM) and elemental concentrations, seasonal variation of some marker elements were investigated. The results can be applied for the investigation of further air pollution sources and for the evaluation of air quality.     

Airborne particulates (PM2.5/PM10) monitoring in Korea by instrumental neutron activation analysis

Instrumental neutron activation analysis was used for the analysis of 25 trace elements in airborne particulate matter (PM) for air pollution monitoring. For the collection of air samples, the Gent stacked filter unit low volume sampler and two types of Nuclepore polycarbonate filters were employed. Samples were collected at selected sampling dates in suburban and industrial regions of Daejon city in the Republic of Korea. Mass concentrations and black carbon of PM were measured, and enrichment factors were calculated. The results were used to describe the emission sources and their correlation patterns.