99Ru,61Ni,57Fe,and119Sn Mössbauer studies of Heusler alloys containing ruthenium

⁹⁹Ru,⁶¹Ni,⁵⁷Fe and¹¹⁹Sn Mössbauer spectroscopic studies were made on ternary intermetallic compounds containing ruthenium, Ru_xY_3?xZ (Y=Fe, Ni; Z=Si, Sn). In the system of Ru_xFe_3?xSi, two different hyperfine magnetic fields were observed at the⁹⁹Ru nuclei (H _hf[Ru]) in the range ofx≤1.0 and the magnitude of eachH _hf[Ru] was found to decrease with an increase in the ruthenium concentrationx. Both the⁹⁹Ru and¹¹⁹Sn Mössbauer spectra of Ru₂FeSn could be analyzed with two sets of magnetically split lines. The⁶¹Ni Mössbauer spectra of Ru₂NiSn were obtained at 5 and 77 K.     

ZnO nano-rods synthesized by nano-particle-assisted pulsed-laser deposition

We succeeded in synthesizing ZnO nanorods by nanoparticle assisted pulsed-laser deposition (PLD) without using any catalyst where nanoparticles formed by condensation of ablated particles play an important role. The nanorods have an average size of about 120 nm. Stimulated emission was observed from ZnO nanorods at 388 nm by optical pumping. The size-controlling of nanorods can be achieved by controlling the size and the density of these nanoparticles. PACS 61.46.+w; 81.07.Bc; 78.66.Hf; 78.67.Bf; 81.16.Mk.     

Fabrication of LiNbO3 thin films by pulsed laser deposition and investigation of nonlinear properties

Thin films of LiNbO₃ were deposited by pulsed-laser deposition (PLD). Crystalline and transparent films were deposited on a sapphire substrate at 400 °C, in 100 mTorr of oxygen, with a fluence lower than 1.2 J/cm². Droplet free films were deposited with low ablation laser fluence by the eclipse method, and waveguide losses were 15.9 dB/cm and 3.1 dB/cm. Subsequently, second-harmonic generation (SHG) was achieved by waveguide mode phase matching. The center wavelength of the matching spectrum was 853 nm, and the full width at half maximum (FWHM) was 19 nm. PACS 42.70.Mp; 52.38.Mf; 68.55.Jk; 77.84.Dy; 81.15.-z     

Micromachining of a thin film by laser ablation using femtosecond laser with masks

A gold thin film was machined by laser ablation using a femtosecond laser with mask patterns in the shape of lines and numbers. The patterns were successfully transferred with proper focusing and laser fluence. The optimal femtosecond laser fluence to keep the line width was about 5.2 mJ/cm² on the mask, and 99 mJ/cm² on the film. The processing resolution was 13 μm, and the narrowest line width was about 4 μm.     

Dynamical study of femtosecond-laser-ablated liquid-aluminum nanoparticles using spatiotemporally resolved x-ray-absorption fine-structure spectroscopy

We study the temperature evolution of aluminum nanoparticles generated by femtosecond laser ablation with spatiotemporally resolved x-ray-absorption fine-structure spectroscopy. We successfully identify the nanoparticles based on the L-edge absorption fine structure of the ablation plume in combination with the dependence of the edge structure on the irradiation intensity and the expansion velocity of the plume. In particular, we show that the lattice temperature of the nanoparticles is estimated from the L-edge slope, and that its spatial dependence reflects the cooling of the nanoparticles during plume expansion. The results reveal that the emitted nanoparticles travel in a vacuum as a condensed liquid phase with a lattice temperature of about 2500 to 4200 K in the early stage of plume expansion.     

Evaluation of immobilized-lysozyme by means of TOF-SIMS

Evaluation of immobilized-proteins on bio-devices is important for the development of sophisticated devices. Lysozyme molecules immobilized on substrates were evaluated by means of time-of-flight secondary ion mass spectrometry (TOF-SIMS). Two types of the lysozyme-immobilized samples were prepared by controlling the binding parts, i.e., the amino groups or carboxyl groups, of the protein. The TOF-SIMS spectra of each sample were analyzed with mutual information to select fragment ions specific to each sample. According to the results, differences between the samples being immobilized in the different ways are suggested, and the surface structure of the lysozyme molecule immobilized at amino groups is determined based on three-dimensional structure of lysozyme in the Protein Data Bank.     

Pressure loading of detonation waves through 90-degree bend in high pressure H2–O2–N2 mixtures

Detonation experiments are conducted to investigate the detonation wave behavior in steam pipelines of boiling water reactors. Accumulated gases in BWRs are stoichiometric hydrogen/oxygen mixtures diluted with steam at 7 MPa. In the experiment, flammable gas mixture diluted with nitrogen at room temperature and up to 5 MPa is used to achieve equivalent detonation condition. Two test pieces are used, one is straight tube and the other is 90-degree bend. No initial pressure dependency in detonation wave behavior is observed in the experiments. However, in the straight tube tests, detonation velocities higher than theoretical values are measured when the initial pressures are greater than 2.3 MPa. This result is considered as attribution of real gas effect. In the 90-degree bend experiments, pressure time histories reveal pressure loads greater than the straight tube portion at two locations. One is a high pressure peak at the extrados of the bend and the other is a double pressure peak just downstream of the bend outlet. Second pressure peak just downstream of the bend outlet is due to transverse wave propagation. Additionally, the largest impulse is observed not at the extrados of the bend but at the intrados of bend outlet. These results show the importance of more investigations on transverse wave behaviors in failure potential evaluation.     

Laser spectroscopy of trapped 7Be and 10Be at a prototype slow RI-beam facility of RIKEN

A next-generation slow radioactive nuclear ion beam facility (SLOWRI) which provides slow, high-purity and small emittance ion beams of all elements is being build as one of the principal facilities at the RIKEN RI-beam factory (RIBF). High energy radioactive ion beams from the projectile fragment separator BigRIPS are thermalized in a large gas catcher cell. The thermalized ions in the gas cell are guided and extracted to a vacuum environment by a combination of dc electric fields and inhomogeneous rf fields (rf carpet ion guide). From there the slow ion beam is delivered via a mass separator and a switchyard to various devices: such as an ion trap, a collinear fast beam apparatus, and a multi-reflection time of flight mass spectrometer. In the R&D works at the present RIKEN facility, an overall efficiency of 5% for a 100A MeV ⁸Li ion beam from the present projectile fragment separator RIPS was achieved and the dependence of the efficiency on the ion beam intensity was investigated. Recently our first spectroscopy experiment at the prototype SLOWI was performed on Be isotopes. Energetic ions of ¹⁰Be and ⁷Be from the RIPS were trapped and laser cooled in a linear rf trap and the specific mass shifts of these isotopes were measured for the first time.