The effect of humidity on thermal process of zinc acetate

The thermal decomposition of zinc acetate dihydrate Zn(CH₃CO₂)₂·2H₂O in some humidity-controlled atmospheres has been successfully investigated by novel thermal analyses, which are sample-controlled thermogravimetry (SCTG), thermogravimety combined with evolved gas analysis using mass spectrometry (TG–MS) and simultaneous measurement of differential scanning calorimetry and X-ray diffractometry (XRD–DSC). The thermal processes of anhydrous zinc acetate in dry gas atmosphere by conventional linear heating experiment initiated with the sublimation around 180 °C, followed by the fusion and the decomposition over 250 °C. SCTG was useful to interpret clearly the successive reaction because the high-temperature parallel decompositions were effectively inhibited. The thermal behavior changed dramatically by introducing water vapor in the atmosphere and the thermal process was quite different from that in dry gas atmosphere. Zinc oxide (ZnO) was formed only in a humidity-controlled atmosphere, and could be easily synthesized at temperatures below 300 °C. XRD–DSC equipped with a humidity generator revealed directly the crystalline change from Zn(CH₃CO₂)₂ to ZnO. A detailed thermal process of Zn(CH₃CO₂)₂·2H₂O and the effect of water vapor are discussed.     

Injectable Polypeptide Hydrogel Depot System for Assessment of the Immune Response–Inducing Efficacy of Sustained Antigen Release Alone

Vaccines typically contain an antigen, delivery system (vehicle), and adjuvant, all of which contribute to inducing a potent immune response. Consequently, design of new vaccines is difficult, because the contributions and interactions of these components are difficult to distinguish. Here, it is aimed to develop an easy‐to‐use, non‐immunogenic, injectable depot system for sustained antigen release that will be suitable for assessing the efficacy of prolonged antigen exposure per se for inducing an immune response. This should mimic real‐life infections. Recombinant elastin‐like polypeptides with periodic cysteine residues (cELPs) are selected, which reportedly show little or no immunogenicity, as carriers and tetanus toxoid (Ttd) as an antigen. After subcutaneous injection of the mixture, cELP rapidly forms a disulfide cross‐linked hydrogel in situ, within which Ttd is physically incorporated, affording a biodegradable antigen depot. A series of Ttd‐containing hydrogels is examined. A single injection induces high levels of tetanus antibody with high avidity for at least 20 weeks in mice. The chain length of cELP proves critical, whereas differences in hydrophobicity has little effect, although hydrophilic cELPs are more rapidly biodegraded. This system's ability to distinguish the contribution of sustained antigen release to antibody induction should be helpful for rational design of next‐generation vaccines.     

Modeling Thioredoxin Reductase-Like Activity with Cyclic Selenenyl Sulfides: Participation of an NH⋅⋅⋅Se Hydrogen Bond through Stabilization of the Mixed Se−S Intermediate

At the redox-active center of thioredoxin reductase (TrxR), a selenenyl sulfide (Se−S) bond is formed between Cys497 and Sec498, which is activated into the thiolselenolate state ([SH,Se⁻]) by reacting with a nearby dithiol motif ([SH^Cys59,SH^Cys64]) present in the other subunit. This process is achieved through two reversible steps: an attack of a cysteinyl thiol of Cys59 at the Se atom of the Se−S bond and a subsequent attack of a remaining thiol at the S atom of the generated mixed Se−S intermediate. However, it is not clear how the kinetically unfavorable second step progresses smoothly in the catalytic cycle. A model study that used synthetic selenenyl sulfides, which mimic the active site structure of human TrxR comprising Cys497, Sec498, and His472, suggested that His472 can play a key role by forming a hydrogen bond with the Se atom of the mixed Se−S intermediate to facilitate the second step. In addition, the selenenyl sulfides exhibited a defensive ability against H₂O₂-induced oxidative stress in cultured cells, which suggests the possibility for medicinal applications to control the redox balance in cells.     

Phase Transition of CuITe

The phase transition and the crystal structures of CuITe were investigated by differential thermal analysis and X-ray powder diffraction measurements in the temperature range between 300 and 683 K. The new phase transition in CuITe was observed at 592 K. The enthalpy of transition is ΔH=0.125 kJ mol^-1. The new phase above 592 K belongs to tetragonal system with the space group I4₁ /amd. This revised version was published online in August 2006 with corrections to the Cover Date.     

Diastereoselective imino-aldol condensation of chiral 3-(p-Tolylsulfinyl)-2-furaldimine and ester enolates

(Ss)-3-(p-Tolylsufinyl)-2-furaldimine was synthesized, and condensation of the chiral furaldimine with lithium ester enolates has been examined. The product distribution of the reaction is dependent upon reaction conditions and on the kind of the substituent placed on the esters. Disubstituted ester enolate resulted in the exclusive formation of (4R)-beta-lactam, while unsubstituted, tert-butyl ester enolate preferentially gave (3R)-beta-amino ester. With the monosubstituted ester enolates, the condensation afforded (4R)-beta-lactams and/or (3R)-beta-amino esters as major products. This method has been applied to an efficient route to chiral furyl beta-lactams.     

Dissolution tests for self-setting calcium phosphate cement-containing nifedipine

Nifedipine-containing calcium phosphate cement (CPC) was prepared, and nifedipine (NF) release from this preparation was evaluated by the shaking method (SK), Japanese Pharmacopoeia XIV (JPXIV) paddle method (PD), and JPXIV flow-through cell method (FT). The release of NF from the CPC preparation continued for 7 d or longer by all these methods. This suggests that the release of NF can be controlled by preparing NF-containing CPC. The release pattern of NF from CPC in these tests was found to follow the Higuchi equation. However, the Higuchi constant differed among the three dissolution tests, probably because the apparent tortuosity of capillary system (tau) varied.     

Amino acid end-group in commercial heparin. III. Determination of the number of amino groups of amino acid and hexosamine residues per heparin molecule

The reactions of heparin with 2,4,6-trinitrobenzenesulfonic acid (TNBS) were studied spectrometrically. Seven different commercial heparins were used in this study. The amino groups react with TNBS to form equimolar amounts of trinitrophenylated (TNP) amino groups and bisulfite ions. The TNP-amino groups further react with bisulfite ions to form the monosubstituted anionic sigma complex. The absorption spectrum with two maxima at approximately 350 nm and approximately 420 nm, characteristic of either the TNP-amino groups or the complex, was analyzed for the reaction of TNBS with heparin. It was shown that the reactivities of TNBS with amino groups from α-amino acid and hexosamine residues are greatly different. By combining the results of the reaction kinetics and the reaction of heparin with Sanger's reagent, the number of the α-amino groups and the free amino groups in hexosamine residues were determined. These data have been performed with a range of heparins from different commercial sources, of different activities and physical characteristics. No correlation was found between the free amino contents of these heparins and biological potency. © 1993 John Wiley & Sons, Inc.     

High Refractive-Index Microspheres as Optical Cavity Structure

Microspheres of refractive index of n_D > 2.0 have been investigated. The organic-inorganic hybrid microspheres of n_D = 1.72 were prepared by the vibrating orifice technique using titanium-tetra-n-butoxide (TTBu) and diphenyldimethoxysilane (DPhDMS). For lasing demonstration, Eu³⁺-doped microspheres were prepared using europium (III) thenoyltrifluoroacetonate [Eu(TTFA)₃] as the dopant. The particles have good spherical shape, smooth surface and high optical transparency. The diameters of the particles could be controlled to within 0.1 m. Subsequent heating of the microspheres at 550°C under oxygen atmosphere resulted in an increase in the refractive index up to n_D = 2.6 with retention of the spherical shape. Resonant emission was confirmed from Eu^{3 +}-doped microspheres after heating at 400–550°C, by pumping with the 514.5 nm line of a CW- Ar⁺laser.     

Total synthesis of brevetoxin-B

Brevetoxin-B (BTX-B), produced by the red tide organism, Gymnodium breve Davis, is the first member of marine polycyclic ethers to be structurally elucidated and one of the most potent neurotoxins. The structural feature is a trans-fused polycyclic ether ring system with 23 stereocenters. Its unique, complex structure and potent biological activity have attracted the attention of synthetic organic chemists. Total synthesis of BTX-B has been accomplished via the coupling of the ABCDEFG and IJK-ring segments, each ether ring of which was stereoselectively and efficiently constructed on the basis of SmI2-induced intramolecular cyclization, 6-endo-cyclization of hydroxy epoxide, ring-closing olefin metathesis, and SmI2-induced intramolecular Reformatsky-type reaction. Several kinds of double reactions at the left and right sides were efficiently used through the synthesis.     

Total synthesis of (+)-cylindricine C

A stereoselective total synthesis of (+)-cylindricine C has been achieved starting with (S)-N-Boc-2-pyrrolidinone. The key elements of this synthesis involve the sequence of reactions including BF₃-mediated addition of the allyl Grignard reagent to the cyclic imine, spirocyclization via enamine formation, and intramolecular Michael addition to form the tricyclic core.