Synthesis of directly linked zinc(II) porphyrin-imide dyads and energy gap dependence of intramolecular electron transfer reactions

A series of zinc(II) porphyrin-imide dyads (ZP-Im), in which an electron donating ZP moiety is directly connected to an electron accepting imide moiety in the meso position, have been prepared for the examination of energy gap dependence of intramolecular electron transfer reactions with large electronic coupling. The nearly perpendicular conformation of the imide moiety towards the porphyrin plane has been revealed by Xray crystal structures. The energy gap for charge separation, 1ZP* - Im --> ZP+ - Im-, is varied by changing the electron accepting imide moiety to cover a range of about 0.8 eV in DMF. Definitive evidence for electron transfer has been obtained in three solvents (toluene, THF, and DMF) through picosecond-femtosecond transient absorption studies, which have allowed us to determine the rates of photoinduced charge separation, 1ZP* - Im --> ZP+ - Im-, and subsequent thermal charge recombination ZP+ - Im- --> ZP - Im. The free-energy gap dependence (energy gap law) has been probed from the normal to the nearly top region for the charge separation rate alone, and only the inverted region for the charge recombination rate. Although both of the energy gap dependencies can be approximately reproduced by means of the simplified semiclassical equation, when we take into consideration the effect of the high frequency vibrations replaced by one mode of averaged frequency, many features, including the effects of solvent polarity and the electron tunneling matrix element on the energy gap law, differ considerably from those of the previously studied porphyrin-quinone systems, which have weaker interchromophore electronic interactions.     

m-Diethynylbenzene macrocycles: syntheses and self-association behavior in solution

m-Diethynylbenzene macrocycles (DBMs), buta-1,3-diyne-bridged [4(n)]metacyclophanes, have been synthesized and their self-association behaviors in solution were investigated. Cyclic tetramers, hexamers, and octamers of DBMs having exo-annular octyl, hexadecyl, and 3,6,9-trioxadecyl ester groups were prepared by intermolecular oxidative coupling of dimer units or intramolecular cyclization of the corresponding open-chain oligomers. The aggregation properties were investigated by two methods, the (1)H NMR spectra and the vapor pressure osmometry (VPO). Although some discrepancies were observed between the association constants obtained from the two methods, the qualitative view was consistent with each other. The analysis of self-aggregation by VPO revealed unique aggregation behavior of DBMs in acetone and toluene, which was not elucidated by the NMR method. Namely, the association constants for infinite association are several times larger than the dimerization constant, suggesting that the aggregation is enhanced by the formation of dimers (a nucleation mechanism). In polar solvents, DBMs aggregate more strongly than in chloroform due to the solvophobic interactions between the macrocyclic framework and the solvents. Moreover, DBMs self-associate in aromatic solvents such as toluene and o-xylene more readily than in chloroform. In particular, the hexameric DBM having a large macrocyclic cavity exhibits extremely large association constants in aromatic solvents. By comparing the aggregation properties of DBMs with the corresponding acyclic oligomers, the effect of the macrocyclic structure on the aggregation propensity was clarified. Finally, it turned out that DBMs tend to aggregate more readily than the corresponding phenylacetylene macrocycles, acetylene-bridged [2(n)]metacyclophanes, owing to the withdrawal of the electron density from the aromatic rings by the butadiyne linkages which facilitates pi-pi stacking interactions.     

Rhodamine B amine as a highly sensitive fluorescence derivatization reagent for saccharides in reversed-phase liquid chromatography

6-Rhodamine B amine functions as a highly sensitive fluorescence derivatization reagent for mono- and oligosaccharides; it reacts with the reducing end of saccharides under acidic conditions. The fluorescent derivatives of five monosaccharides can be separated within 25 min by reversed-phase liquid chromatography with isocratic elution. The detection limits (S/N = 3) for mono-, di-, and oligosaccharides are 7-51, 13, and 9-35 fmol/20 microl injection, which correspond to analyte concentrations of 35-255, 65, 45-175 nM, respectively. We have applied this derivatization method successfully to the analysis of the components of oligosaccharides in glycoproteins (ribonuclease B and fetuin) following their acidic or enzymatic hydrolysis. The results from these analyses are in good agreements with the reported values established previously.     

Radiation-induced solid-state polymerization of trioxane under high pressure

The in-source polymerization of trioxane in the solid state was investigated over a wide range of temperature and pressure, i.e., from 30 to 140°C and up to 7000 kg/cm², respectively. In the polymerization that was carried out slightly below the melting point under pressure, the higher the pressure, the higher the rate of polymerization. It was confirmed that the maximum rate of solid-state polymerization of trioxane occurs near the melting points, even under elevated pressure. The rate of polymerization decreased with increasing pressure at constant temperature. The shape of the time–conversion curves may be classified into two types, i.e., one which is typical of high pressure and low temperature, and the other which is typical of low pressure and high temperature. Changes in the shape of the conversion—intrinsic viscosity curves occurred coincidentally. Thus, three regions for the different “polymerization characteristic” were determined as functions of polymerization temperature and pressure. Explanations are given for the above-mentioned polymerization characteristic.     

One-pot synthesis of sialo-containing glycosyl amino acids by use of an N-trichloroethoxycarbonyl-beta-thiophenyl sialoside

We describe an efficient synthesis of 2,6- and 2,3-sialyl T antigens linked to serine in a one-pot glycosylation. We first investigated the glycosidation of thiosialosides by varying the N-protecting group. Modification of the C-5 amino group of beta-thiosialosides into the N-9-fluorenylmethoxycarbonyl, N-2,2,2-trichloroethoxycarbonyl (N-Troc), and N-trichloroacetyl derivatives enhanced the reactivity of these compounds towards glycosidation. Addition of a minimum amount of 3 A molecular sieves was also effective in improving the yield of alpha-linked sialosides. Next, we conducted one-pot syntheses of the glycosyl amino acids by using the N-Troc sialyl donor. The N-Troc derivative can be converted into the N-acetyl derivative without racemization of the amino acids. Branched-type one-pot glycosylation, initiated by regioselective glycosylation of the 3,6-dihydroxy galactoside with the N-Troc-beta-thiophenyl sialoside, provided the protected 2,6-sialyl T antigen in good yield. Linear-type one-pot glycosylation, initiated by chemoselective glycosylation of galactosyl fluoride with the N-Troc-beta-thiophenyl sialoside, afforded the protected 2,3-sialyl T antigen in excellent yield. Both protected glycosyl amino acids were converted into the fully deprotected 2,6- and 2,3-sialyl T antigens linked to serine in good yields.     

A new approach to the synthesis of pyridazino[4,5-c]pyridazinones

The reaction of 5-hydrazinopyridazin-3(2H)-ones 1 with α-keto diester 2 in acetic acid afforded the corresponding 4,6-dihydropyridazino[4,5-c]pyridazin-5(1H)-ones 3 and pyrrolo[2,3-d)pyridazin-4(5H)-ones 4 . Compounds 3 were also obtained from 4-bromo-5-hydrazinopyridazin-3(2H)-ones 8 and 2 under milder conditions. 5-Bromo-4-hydrazinopyridazin-3(2H)-one 9 , the regioisomer of 8b , also reacted readily with 2a to give 4,7-dihydropyridazino[4,5-c]pyridazin-8(1H)-one 10b , the regioisomer of 3b .     

Search for a simpler synthetic model system for intramolecular 1,3-dipolar cycloaddition to the 5,6-double bond of a pyrimidine nucleoside

In search for a simpler model system for the study of intramolecular thermal reactions between the base and 5'-functionalized sugar moiety in nucleosides, 1-(3-azidopropyl)uracil (2), 1-(4-azidobutyl) pyrimidines (12 and 13) and 1-(5-azidopentyl)-uracil (14) was synthesized through the corresponding ω-benzoyloxy-(6,7 and 8) and ω-hydroxyalkyl-pyrimidines (9,10 and 11). Heating 2 gave 1,N⁶-trimethylene-6-aminouracil (4), while heating 12 and 13 gave N¹-C₆ cleaved addition products. 15 and 16, respectively. 15 was regiospecifically transformed to 1,2,3-triazole derivatives, 17,18 and 19. Heating 1-(4-azidobutyl)-5-bromouracil (20) yielded 3,9-tetramethylene-8-azaxanthine (22). 9 with NBA gave 1,0⁶-tetramethylene-5-bromo-6-hydroxy-5,6-dihydrouracil (24) and the 5-brominated analog of 9 (25). The 4-functionalized butyl side chain proved to serve as a substitute for the 5'-functionalized sugar moiety in pyrimidine ribonucleosides.     

Plaunol A and B,new anti-ulcer diterpenelactones from Crotonsublyratus

Two new diterpenelactones named plaunol A ($\text{2}$) and B ($\text{3}$) exhibiting anti-Shay ulcer activity were isolated from Thai medicinal plant, $\text{Croton}$$\text{sublyratus}$. Structure of $\text{2}$ was determined by X-ray analysis of its $\text{p}$-bromobenzoate and structure of $\text{3}$ was deduced from the results of chemical correlation and the spectral data.     

Metal-complex assemblies constructed from the flexible hinge-like ligand H2bhnq: structural versatility and dynamic behavior in the solid state

Novel metal-complex assemblies constructed from the flexible hinge-like ligand H(2)bhnq (H(2)bhnq=2,2'-bi(3-hydroxy-1,4-naphthoquinone)) have been synthesized. The X-ray crystal structures of these compounds reveal that four types of architectures are accessible by variation of the metal ions. In copper(II) compounds 1-3, the chelating bhnq(2-) ions bridge copper(II) centers to form one-dimensional zigzag chains. The chains of 1-3 are arranged by hydrogen-bonding interactions and stacking interactions to produce porous structures. Cobalt(II) and zinc(II) compounds 4 and 5 form one-dimensional helical chains. In 4 and 5, the crystal packing induces spontaneous resolution of the helical chains with chiral cavities formed perpendicular to the helices. Nickel(II) compounds 6 and 7 form cyclic tetramers. The fourth architecture, a dimer (compound 8), is obtained by the reaction of zinc(II) and bhnq(2-) in MeOH. In these compounds, changes of the dihedral angles and the metal-coordination mode of the bhnq(2-) ion induce the structural versatility. The assemblies of the zigzag chains of the copper(II) compounds exhibit reversible vapochromic behavior. UV/Vis, powder X-ray diffraction, EPR, and adsorption isotherm measurements indicate that this vapochromic behavior is based on the hinge-like flexibility of the bhnq(2-) ion.     

Triple hydrogen bonds direct crystal engineering of metal-assembled complexes: the effect of a novel organic-inorganic module on supramolecular structure

Novel triply hydrogen bonded suprastructures based on [M(tdpd)2(L)2]2- (H2tdpd=1,4,5,6-tetrahydro-5,6-dioxo-2,3-pyrazinedicarbonitrile, L=solvent) and melamine-analogous cations have been synthesized and characterized. The use of anions containing two AAA sets from [M(tdpd)2(L)2]2- together with cations containing one DDD set (A=hydrogen-bond acceptor, D=hydrogen-bond donor) leads to the formation of complementary triply hydrogen bonded modules in the solid state. In all cases, the building module is further extended via additional hydrogen-bonding interactions to produce a tape, and tapes are assembled into sheets. These results show that a hydrogen-bonded module consisting of different kinds of building blocks, one of which is a metal complex that includes hydrogen-bond acceptor sites and the other is a hydrogen-bond donor molecule, will be attractive for constructing metal-containing supramolecular systems by the self-assembly technique.