Synthesis of optically active cobalt(salen) type complexes and their asymmetric reactivity toward propylene oxide

An optically active Co(I)(salen) type complex, lithium N,N′-bis(salicylaldehyde)-1(R), 2(R)-1,2-trans-cyclohexanediiminatocobalt(I), was prepared by reducing the Co^II complex, N,N′-bis(salicylaldehyde)-1(R),2(R)-1,2-trans-cyclohexanediiminatocobalt(II), with LiAlH₄. The structure of the Co^I complex was determined on the basis of the structure of the corresponding Co^II complex and was confirmed by usual physicochemical methods. Furthermore, characteristics of the absorption and circular dichroism(CD) spectra of the Co^I complex were compared with those of the reported structure of Na⁺[Co(I)(salen)]^?. Highly asymmetric selectivity was found in a resolution reaction of DL-propylene oxide by use of the above optically active lithium cobalt(I) complex as a catalyst.     

Vinyl Polymerization. 269. Polymerization of Methyl Methacrylate Initiated by p,p'-Dimethoxydiphenyldiazomethane

Using p,p'-dimethoxydiphenyldiazomethane (DMDM) as initiator, the polymerization of methyl methacrylate (MMA) in benzene or in bulk was carried out. The initial rate of polymerization, R_p, was found to be expressed by the following equation:

R_p = k[DMDM]^0.53 [MMA]^0.84

The polymerization was confirmed to proceed by a radical mechanism. The over-all activation energy for the polymerization in benzene was calculated as 19.3 kcal/mole. The rate of thermal decomposition of DMDM was also measured in benzene and the rate equation was obtained as follows:

k_d (sec^?1) = 1.0 × 10¹⁵ exp (^?29.1 kcal/RT) (for 50-80°C)

Explanations of these observations are discussed in connection with those of the preceding papers.     

Elementary Reactions of Metal Alkyl in Anionic Polymerization. III. Reaction Mode of n-Butylmagnesium Bromide with α,β-Unsaturated Carbonyl Compounds∗

Reaction modes of n-butylmagnesium bromide with α,β-unsaturated esters, ketones, and nitriles were investigated in ether under anionic polymerization conditions. n-Butane and conjugate addition products observed were with all the monomers examined, but carbonyl addition products were not detected except with the unsaturated esters. Product distribution depends mainly upon reaction temperature and the concentration of the Grignard reagent, not upon the concentration of the unsaturated compounds. n-Butyl-magnesium bromide etherate in toluene gave similar results.     

Liquid crystalline polyurethane. Polyurethanes containing bis-(p-oxymethylphenyl) terephthalate

Several polyurethanes based on bis-(p-oxymethylphenyl) terephthalate (BOPT) were synthesized and studied with respect to some of their thermal properties. BOPT exhibits a mesomorphic phase at 252–264°C. Polymerization was carried out by equimolar reaction with hexamethyl-ene diisocyanate (HDI), 4,4-dicyclohexylmethane diisocyanate (H₁₂MDI) α,α'-diisocyanate-1,3-dimethylcyclohexane (H6 XDI), 4,4′-diphenylmeth-ane diisocyanate (MDI), 2,4-tolylene diisocyanate (TDI), and phenylene diisocyanate (PDI). It became clear that polyurethanes obtained from BOPT with HDI, H₁₂MDI, H₆XDI, and TDI have mesomorphic phases at 243–291, 214–250, 172–229, and 180–234°C, respectively, as determined by DSC and polarized microscopy, and that all polyurethanes are crystalline as evidenced by x-ray diffraction.     

Synthesis of Substituted Phenyl Esters of Amino Acids and Polycondensation in Langmuirblodgett Films

Long-alkyl-chain phenyl esters of β-alanine, glycine, and L-valine were prepared, and their monolayer properties were correlated with their molecular structures. These compounds formed stable monolayers on acidic subphases. In particular, the p-hexadecylphenyl esters of β-alanine and glycine were remarkably stable, and their monolayers could be deposited on calcium fluoride plates as Y-type film by Blodgett's technique. The polycondensation of multilayers under an atmosphere saturated with triethylamine was investigated by changes in the IR spectra. It was determined that the polycondensation proceeded by a first-order reaction mechanism in the initial stage and that the rate in multilayers was faster than that in the bulk crystalline powder. These results suggest that the polycondensation is accelerated by a regular arrangement of the monomer in the multilayers, where the active sites are concentrated and located better for the polycondensation. In the case of the polycondensation in multilayers of the glycine ester, two kinds of condensation proceeded to afford poly(glycine) and 2,5-piperazinedione.     

Flow injection system with in-line Winkler's procedure using 16-way valve and spectrofluorimetric determination of dissolved oxygen in environmental waters

Flow injection spectrofluorimetry with in-line Winklers procedure was developed for the dissolved oxygen (DO) determination. 2-Thionaphthol reacted with iodine produced by Winkler’s method to form fluorescence inactive disulfide compound. To automate the process completely, a 5-channel flow system with a newly designed 16-way valve was assembled. The system consisted of a dispersion coil (DC), a precipitate formation coil (PFC), a precipitate dissolving coil (PDC), and extraction coil (EC). A calibration can be constructed by using a standard iodine solution for dissolved oxygen. The calibration graph was linear over the range 1.2×10⁻⁴∼6.0×10⁻⁴ mol l⁻¹ iodine (1.96∼9.80 mg O l⁻¹)). The relative standard deviation (n=6) was below 0.3% for the 4×10⁻⁴ mol l⁻¹ iodine (6.27 mg O l⁻¹) determination. The sample throughput was 12/h.     

Thermal and mechanical properties of radiation crosslinked poly(tetrafluoroethylene-co-perfluoromethyl vinyl ether)

The effect of irradiation temperature on the polymer properties was investigated for the fluoroelastomer poly(tetrafluoroethylene-co-perfluoromethylvinyl ether) (TFE/PMVE). TFE/PMVE samples were γ-irradiated to 150 kGy at temperatures ranging from 77 K to 373 K. Analysis of the sol/gel behaviour, tensile properties, and glass transition temperatures indicated that crosslinking commenced in the temperature range 195 to 263 K, for a dose of 150 kGy. The latter temperature was 13 K below the glass transition temperature. Crosslinking remained relatively constant to higher temperatures. Chain scission reactions were found to occur well below the glass transition temperature and increased at higher temperatures. The optimum temperature for the radiation crosslinking of TFE/PMVE, for the temperatures investigated, was 263 K.     

Lifetime regulation of the charge-separated state in DNA by modulating the oxidation potential of guanine in DNA through hydrogen bonding

A series of naphthalimide (NI)- and 5-bromocytosine ((br)C)-modified oligodeoxynucleotides (ODNs) were prepared, and their lifetimes of the charge-separated states during the photosensitized one-electron oxidation of DNA were measured. Various lifetimes of the charge-separated states were observed depending on the sequence and the incorporation sites of (br)C, and the oxidation potential of G in the (br)C:G base-pair relative to that of G in the C:G base-pair and in the GGG sequence was determined by comparing the lifetimes of the charge-separated states. The change in the cytosine C5 hydrogen to bromine resulted in a 24 mV increase in the oxidation potential of G in the (br)C:G base-pair as compared to that of G in the C:G base-pair, the value of which is comparable to a 58 mV decrease in the oxidation potential of G in the GGG sequence. These results clearly demonstrate that hole transfer in DNA can be controlled through hydrogen bonding by introducing a substituent on the cytosine.     

Retinal Photodamage Mediated by All‐trans‐retinal†

Accumulation of all‐trans‐retinal (all‐trans‐RAL), reactive vitamin A aldehyde, is one of the key factors in initiating retinal photodamage. This photodamage is characterized by progressive retinal cell death evoked by light exposure in both an acute and chronic fashion. Photoactivated rhodopsin releases all‐trans‐RAL, which is subsequently transported by ATP‐binding cassette transporter 4 and reduced to all‐trans‐retinol by all‐trans‐retinol dehydrogenases located in photoreceptor cells. Any interruptions in the clearing of all‐trans‐RAL in the photoreceptors can cause an accumulation of this reactive aldehyde and its toxic condensation products. This accumulation may result in the manifestation of retinal dystrophy including human retinal degenerative diseases such as Stargardt’s disease and age‐related macular degeneration. Herein, we discuss the mechanisms of all‐trans‐RAL clearance in photoreceptor cells by sequential enzymatic reactions, the visual (retinoid) cycle, and potential molecular pathways of retinal photodamage. We also review recent imaging technologies to monitor retinal health status as well as novel therapeutic strategies preventing all‐trans‐RAL‐associated retinal photodamage.     

Hole transfer in DNA: DNA as a scaffold for hole transfer between two organic molecules

Hole transfer process in ODNs conjugated with two organic molecules, pyrene (Py) and phenothiazine (Ptz) was investigated with the pulse radiolysis measurements. Monitoring the transient absorption of Py⁺ and Ptz⁺, it was shown that the hole transfer rate was dependent on the distance and sequence between Py and Ptz.