Non-markovian effects in NMR relaxation processes: An application to molecular dynamics in branched and cross-linked solid polymers

The dynamic of restricted rotatranslation of mobile structural defects along a polymer chain are treated with an equation of motion with a non-Markovian, stochastic force. The MORI/KUBO/ZWANZIG representation gives a stochastic process with a memory where the loss of correlation is dependend on the restriction of diffusional motion of defects. The influence of crosslinks and branchings of the polymer chains on the molecular dynamics are discussed. The analytical spectral densities of ω^−-α-type characterized by the fractal dimensions of the relevant processes in the different polymeric systems, e. g. cis-polybutadiene, cis-polyisoprene, styrene-butadiene-rubber, high density and linear low density polyethylenes, are compared with the observed NMR data.     

The effect of specific nucleation on molecular and supermolecular orientation in isotactic polypropylene

The molecular and supermolecular orientation, morphology and structural changes observed during cold drawing of injection moulded isotactic polypropylene modified by specific α, and β nucleating agents were studied by polarised photoacoustic FTIR spectroscopy, wide-angle X-ray diffraction and differential scanning calorimetry. Significantly lower molecular orientation was found in the core of the β-nucleated injection moulded specimens as compared to unmodified and α-nucleated materials. This has been ascribed to the fast growth of the β-crystallites which inevitably dislocates the flow-induced orientation within the crystalline regions and in their vicinity. Moreover, it was found that the presence of the developed β-crystallites distinctly diminishes the efficiency of the orientational solid-state drawing assessed on both levels of the hierarchical structure (molecular and crystalline). This structural observation is directly connected with macroscopic softening effect of the β-phase: lowering the yield stress and flattening the neck shoulder. Thus, the interrelation between the microstructural and macroscopic effects of the β-phase could be described as a feedback process.     

Simulation of a mixed-conducting membrane-based gas turbine power plant for CO<Subscript>2</Subscript> capture: system level analysis of operation stability and individual process unit degradation

A gas turbine power plant for CO₂ capture, based on oxygen-permeable membranes with mixed ionic-electronic conductivity, was analysed with respect to long-term stability by means of numerical simulation. Due to the attractive transport and physicochemical properties of mixed-conducting La₂NiO_4+δ, this nickelate was selected as a prototype membrane material for this application. Experiments showed very slow degradation of La₂NiO_4+δ membranes at oxygen chemical potentials close to atmospheric conditions, which are associated with kinetic demixing and other microstructure-related factors. Interaction with CO₂ in the intermediate temperature range also leads to lower oxygen permeation, whilst increasing oxygen pressure may cause partial phase decomposition and microstructural changes, thus again limiting the range of possible operation conditions. The relevant operational constraints were included in a detailed membrane-based gas turbine power plant model. The membrane performance degradation with time was approximated by a linear function with average rate of 3.3% per 1,000 operation hours. Furthermore, performance deterioration of the gas turbine compressor and turbine were also considered. Simulations revealed that the power plant is substantially affected by degradation of the ceramic membranes and turbomachinery components. The already rather small operating window was further narrowed when compared with a conventional gas turbine power plant. Two different designs of the membrane-based power plant were analysed: (1) with and (2) without additional combustors (afterburners) between the membrane reactor and the gas turbine. Afterburners increase thermal efficiency as well as power output, but also lead to non-negligible CO₂ emissions. In order to have a frame of comparison, results for a conventional gas turbine power plant with degradation of turbomachinery components are also presented. Simulations representing changes in ambient temperature and fuel composition as well as failure incidents were executed to analyse the susceptibility of the gas turbine power plant to external and internal changes.     

The [Sn(9)Pt(2)(PPh(3))](2)(-) and [Sn(9)Ni(2)(CO)](3)(-) complexes: two markedly different Sn(9)M(2)L transition metal zintl ion clusters and their dynamic behavior

[Sn(9)Pt(2)(PPh(3))](2)(-) (2) was prepared from Pt(PPh(3))(4), K(4)Sn(9), and 2,2,2-cryptand in en/toluene solvent mixtures. The [K(2,2,2-cryptand)](+) salt is very air and moisture sensitive and has been characterized by ESI-MS, variable-temperature (119)Sn, (31)P, and (195)Pt NMR and single-crystal X-ray diffraction studies. The structure of 2 comprises an elongated tricapped Sn(9) trigonal prism with a capping PtPPh(3), an interstitial Pt atom, a hypercloso electron count (10 vertex, 20 electron) and C(3)(v)() point symmetry. Hydrogenation trapping experiments and deuterium labeling studies showed that the formation of 2 involves a double C-H activation of solvent molecules (en or DMSO) with the elimination of H(2) gas. The ESI-MS analysis of 2 showed the K[Sn(9)Pt(2)(PPh(3))](1)(-) parent ion, an oxidized [Sn(9)Pt(2)(PPh(3))](1)(-) ion, and the protonated binary cluster anion [HSn(9)Pt(2)](1)(-). 2 is highly fluxional in solution giving rise to a single time-averaged (119)Sn NMR signal for all nine Sn atoms but the Pt atoms remain distinct. The exchange is intramolecular and is consistent with a rigid, linear Pt-Pt-PPh(3) rod embedded in a liquidlike Sn(9) matrix. [Sn(9)Ni(2)(CO)](3)(-) (3) was prepared from Ni(CO)(2)(PPh(3))(2), K(4)Sn(9), and 2,2,2-cryptand in en/toluene solvent mixtures. The [K(2,2,2-cryptand)](+) salt is very air and moisture sensitive, is paramagnetic, and has been characterized by ESI-MS, EPR, and single-crystal X-ray diffraction. Complex 3 is a 10-vertex 21-electron polyhedron, a slightly distorted closo-Sn(9)Ni cluster with an additional interstitial Ni atom and overall C(4)(v)() point symmetry. The EPR spectrum showed a five-line pattern due to 4.8-G hyperfine interactions involving all nine tin atoms. The ESI-MS analysis showed weak signals for the potassium complex [K(2)Sn(9)Ni(2)(CO)](1-) and the ligand-free binary ions [K(2)Sn(9)Ni(2)](1)(-), [KSn(9)Ni(2)](1)(-), and [HSn(9)Ni(2)](1)(-).     

Size and purity of gold nanoparticles changes with different types of thiolate ligands

Gold nanoparticles (Au-NPs) were prepared by a surfactant-free single-phase reduction of hydrogen tetrachloroaurate(III) hydrate in the presence of different organic thiol ligands. Sizes, size distributions, and crystallinity of the Au-NPs were determined by high-resolution transmission electron microscopy and powder X-ray diffraction, whereas thermogravimetric analysis provided information on the organic ligand-to-gold ratios as well as amounts of contaminants. A systematic decrease in size with increasing conical bulk of the thiolate ligand is observed but large size distributions and contamination of the generated Au-NPs prohibit detailed mechanistic studies. A first-generation Fréchet dendron thiol produced the smallest and cleanest Au-NPs of the narrowest size distribution.     

Temperature-sensitive swelling of poly(N-isopropylacrylamide) brushes with low molecular weight and grafting density

Temperature-sensitive poly(N-isopropylacrylamide) (PNIPAAm) brushes with different molecular weights M(n) and grafting densities σ were prepared by the "grafting-to" method. Changes in their physicochemical properties according to temperature were investigated with the help of in situ spectroscopic ellipsometry and in situ attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy. Brush criteria indicate a transition between a brush conformation below the lower critical solution temperature (LCST) and an intermediate to mushroom conformation above the LCST. By in situ ellipsometry distinct changes in the brush layer parameters (wet thickness, refractive index, buffer content) were observed. A broadening of the temperature region with maximum deswelling occurred with decreasing grafting density. The brush layer properties were independent of the grafting density below the LCST, but showed a virtually monotonic behavior above the LCST. The midtemperature ?(half) of the deswelling process increased with increasing grafting density. Thus grafting density-dependent design parameters for such functional films were presented. For the first time, ATR-FTIR spectroscopy was used to monitor segment density and hydrogen bonding changes of these very thin PNIPAAm brushes as a function of temperature based on significant variations of the methyl stretching, Amide I, as well as Amide II bands with respect to intensity and wavenumber position. No dependence on M(n) and σ in the wavenumber shift of these bands above the LCST was found. The temperature profile of these band intensities and thus segment density was found to be rather step-like, exceeding temperatures around the LCST, while the respective profile of their wavenumber positions suggested continuous structural and hydration processes. Remaining buffer amounts and residual intermolecular segment/water interaction in the collapsed brushes above the LCST could be confirmed by both in situ methods.     

Synthesis and Characterization of Liquid-Crystalline Tetraoxapentacene Derivatives Exhibiting Aggregation-Induced Emission

A series of new tetrakis(dialkoxyphenyl) dicyanotetraoxapentacene derivatives ( 1 a – c ) were prepared by reaction of the appropriate terphenyl diols with tetrafluoroterephthalonitrile in good yields. Compounds 1 b and 1 c , which bear hexyloxy and decyloxy side chains, exhibited columnar hexagonal mesophases, as shown by polarized optical microscopy, variable-temperature powder X-ray diffraction, and differential scanning calorimetry. Single-crystal X-ray diffraction of methoxy-substituted 1 a revealed that the dicyanotetraoxapentacene core is highly planar, consistent with the notion that these molecules are able to stack in columnar mesophases. A detailed photophysical characterization showed that these compounds exhibit aggregation-induced emission in solution, emission in nonpolar solvents, weak emission in polar solvents, and strong emission in the solid state both as powder and in thin films. These observations are consistent with a weakly emissive charge-transfer state in polar solvents and a more highly emissive locally excited state in nonpolar solvents.     

Characterization of a poly(ethersulphone) by on-line coupling of size exclusion chromatography with NMR and FTIR spectroscopy

An on-line detection „on the flow”︁ during the size exclusion chromatography run using FTIR and NMR spectrometers was applied to investigate the liquid chromatographic separation process of oligomers and to identify the separated chromatographic compounds. The FTIR and NMR detectors give real-time information about the chemical structure and functional groups of the eluated species. The preferences and limits of the on-line coupling were discussed using an oligomeric hydroxyl terminated poly(ethersulphone) as an example. Molecular weights could be calculated from the ¹H-NMR spectra of the separated species using the intensities of end-group and main-chain signals. Residues of N-methylpyrrolidone which was used as solvent in the oligomer synthesis were identified by the FTIR detector.