CONE-DIRECTED CONTINGENT DERIVATIVES AND GENERALIZED PREINVEX SET-VALUED OPTIMIZATION

By using cone-directed contingent derivatives, the unified necessary and suffi-cient optimality conditions are given for weakly and strongly minimal elements respectively in generalized preinvex set valued optimization.     

Electroless deposition of open-end Cu nanotube arrays

Cu nanotube arrays were fabricated by electroless deposition using porous anodic aluminium oxide membranes as templates. This was accomplished by a four-step procedure, i.e. pore-wall modification, polishing treatment, sensitization-activation and electroless deposition. The as-synthesized Cu nanotubes possess controllable inner diameter and open ends.     

An effective method for improving diffraction performance of magnetostatic backward volume wave-based magneto-optic Bragg cells by using an appropriately tilted bias magnetic field in YIG film plane

The universal magneto-optic (MO) coupled-mode equations for magnetostatic waves (MSWs) and guided optical waves (GOWs) under arbitrarily tilted bias magnetic fields are presented for the first time and, as an example, applied to the noncollinear Stokes interaction between the incident TE₀-mode light and magnetostatic backward volume wave (MSBVW) excited by single-element microstrip line transducer in yttrium–iron–garnet (YIG) film. Our calculation indicates that, for the case of magnetization parallel to the MSBVW propagation direction, the diffraction efficiency (DE) is equal to the mode-conversion efficiency of the diffracted lights (MCDE) and the calculated curve of relative DE for the MSBVW-based MO Bragg cell in pure YIG waveguide is in good agreement with the experimental data. In contrast, the diffraction performance can be greatly improved by optimizing the bias magnetic field and the DE gain can be increased by 6.3 dB in the tangentially magnetized film. The angular dependences of the DE and the corresponding Bragg angle upon the magnetization direction are also discussed in the paper.     

Copolymerization of N‐vinylcaprolactam and glycidyl methacrylate: Reactivity ratio and composition control

Free‐radical copolymerizations of N‐vinylcaprolactam (VCL) and glycidyl methacrylate (GMA) were investigated to synthesize temperature‐responsive reactive copolymers with minimized compositional heterogeneity. The average copolymer composition was determined by Fourier transform infrared and nuclear magnetic resonance techniques. The reactivity ratios for VCL and GMA were found to be 0.0365 ± 0.0009 and 6.44 ± 0.36 by the Fineman–Ross method and 0.039 ± 0.006 and 6.75 ± 0.29 by the Kelen–Tudos method, respectively. When prepared by batch polymerization, VCL–GMA copolymers had a highly heterogeneous composition and fractions of different solubilities in water. The use of a gradual feeding technique, which included the sequential addition of more reactive GMA monomer into the reaction, yielded copolymers with much more homogeneous composition. The produced copolymers with 0.9 and 0.11 fractional GMA contents preserved their temperature‐responsive properties and precipitated from aqueous solutions when the temperature exceeded 31 °C. The GMA units in the VCL–GMA copolymers were capable of reacting with amino end‐functionalized poly(ethylene oxide) at room temperature to produce poly(N‐vinylcaprolactam)–poly(ethylene oxide) graft copolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 183–191, 2006     

次近邻相互作用对Heisenberg XX链纠缠影响的研究

研究了存在次近邻相互作用(耦合)时Heisenberg XX链的纠缠特性. 结果表明对近邻格点, 随着耦合常数J的变化, 次近邻相互作用的存在可能使其纠缠度增大或者减小; 而对次近邻格点, 引进次近邻相互作用却可以产生纠缠, 并且使其随着|J|的增大而增大. 近邻格点间纠缠存在的临界温度T_c随着J的增大而降低, 次近邻格点间纠缠存在的临界温度T_c随着|J|的增大而升高. 此外对纠缠W态的制备, 次近邻相互作用的存在还使得三量子位情形时W态产生的时刻改变, 而对于四量子位情形却没有影响.     

40,48Ca+90,96Zr融合反应的动力学模型研究

应用改进的量子分子动力学模型,在严格挑选初始核考虑弹靶结构效应的基础上,研究了近垒和垒上融合反应^40,48Ca+^90,96Zr. 研究表明: 4个反应的理论计算截面与实验值很好符合; 丰中子反应⁴⁰Ca+⁹⁶Zr的垒下融合截面比其他3个反应有明显增强的现象.为了理解丰中子反应⁴⁰Ca+⁹⁶Zr与⁴⁰Ca+⁹⁰Zr相比垒下融合截面增强,而Ca+⁹⁶Zr垒下融合截面没有明显增强的原因, 进一步分析了484个反应的融合位垒,中子转移与融合位垒的关系、中子转移与Q值的关系,结果表明: 正反应Q值会引起核子(特别是中子)转移的增强,从而导致动力学融合位垒的下降和垒下融合截面增强.     

The energy exchange and the optimum length of the sample tube of opfirl

The energy exchange between the pumping laser and FIR signal in the optically pumped FIR laser (OPFIRL) system was studied. The iteration method has been used to calculate the power density of the pumping and FIR signals at any point along the optical axis of the sample tube. It was found that the power density of the FIR signal did not always increase along the length of the laser tube. There was a maximum FIR power density at the appropriate point in the sample tube. If the distance of maximum power point from the entrance of the OPFIRL tube was taken as the length of sample tube Z_opt, the maximum FIR laser output should be obtained. This was the optimum length of OPFIRL tube. The value of Z_opt was closely related to the parameter of OPFIRL such as the pumping power density, the pumping detuning and the frequency of the FIR laser. The energy-exchange and the maximum output of the fir laser were calculated under the ideal condition.     

乌骨鸡磷脂侧链脂肪酸的GC-MS分析

用氯仿:甲醇(2:1)超声提取乌骨鸡总磷脂,丙酮脱油精制后,经皂化、甲酯化处理,应用GC-MS联用技术对其侧链脂肪酸组成进行分析,并以面积归一法,计算各脂肪酸的相对百分含量.结果显示,乌骨鸡总磷脂中含有硬脂酸27.46%、花生四烯酸21.39%、油酸18.22%、亚油酸16.67%、棕榈酸12.13%、二十二碳六烯酸(DHA) 2.26%、二十碳三烯酸1.71%、棕榈油酸0.16%.不饱和脂肪酸和多不饱和脂肪酸的含量分别为60.41%和42.03%.乌骨鸡磷脂侧链脂肪酸中高比例的多不饱和脂肪酸和花生四烯酸含量是乌骨鸡磷脂的显著特征.