新型罗丹明型荧光探针的合成及其对Cu(Ⅱ)的识别性能

罗丹明B-酰肼和8-羟基-7-喹啉醛经缩合反应合成了一个新型的荧光探针(L),其结构经1H NMR,MS和元素分析表征。考察了L对金属离子的识别性能,结果表明:在乙腈溶液[V(MeCN)∶V(H2O)=19∶1,pH7.0]中,L可高选择性的识别Cu(Ⅱ)。Cu(Ⅱ)能诱导L内酰胺结构开环并形成1∶2型的配合物L-Cu(Ⅱ),这一过程是可逆的。     

尖晶石型钛酸锂负极材料的研究现状

对尖晶石型钛酸锂(Li4Ti5O12)的研究现状进行了综述。重点介绍了解决Li4Ti5O12倍率性能的途径,同时对其可能的胀气原因作了分析。参考文献32篇。     

量子点敏化太阳电池

基于量子限域效应的新型太阳电池——量子点敏化太阳电池(QD-SSCs),由于其最大理论转化效率超过了传统的Shockley-Queisser极限效率,已经成为目前最具研究潜力的太阳电池之一。本文综述了近几年来QD-SSCs领域的研究进展,主要从半导体氧化物纳米材料,特别是其低维纳米结构下的特殊性能;金属硫族化合物纳米晶;电解质;对电极等几个方面评述了电池材料的研究进展。另外,从量子点材料的制备和组装方面简述了目前电池光阳极的研究情况,并介绍了提高量子点光敏化性能的几个新途径。最后,从开路电压和短路电流角度分析了影响电池性能的几个关键因素,并对QD-SSCs今后的发展进行了展望。     

Fe/MgO催化裂解甲烷制备碳纳米带

采用溶胶-凝胶法制备了Fe/MgO催化剂(E)。以甲烷为碳源,通过催化化学气相沉积法在E上生长出了碳纳米带(F),其结构和形貌经SEM和TEM表征。在最佳制备条件[E中Fe负载量为50%,甲烷流速70mL·min-1,于870℃反应1 h]下制备的F宽度约135 nm,厚约89 nm,长度在几十微米量级。     

A Hairpin Electrochemical Aptasensor for Sensitive and Specific Detection of Thrombin Based on Homogenous Target Recognition

An electrochemical aptasensor was developed for sensitive and specific detection of thrombin by combining homogenous recognition strategy and gold nanoparticles (AuNPs) amplification. Streptavidin‐alkaline phosphatase was used as reporter molecule. Compared with the traditional hairpin aptasensor monitoring the distance of the redox molecule from the electrode surface, the proposed aptasensor successfully overcome the limitations of distance and improved the stability and high affinity of the aptamer hairpin through homogenous recognition, which enhanced the sensitivity and selectivity of the sensors effectively. Additionally, AuNPs were employed to increase the active area and conductivity of the electrode, thus, improving the sensitivity of the aptasensor. As a result, the designed thrombin detection sensor obtained a lower detection limit of 0.52 pM in buffer and 6.9 pM in blood serum.     

Coagulation behaviors and in-situ flocs characteristics of composite coagulants in cyanide-containing wastewater: Role of cationic polyelectrolyte

In this paper,composite coagulants(PFS,PFSC05,PFSC1 and PFSC5),prepared by mixing polyferric sulfate(PFS)and cationic polyelectrolyte(CP)coagulants with different weight percent(Wp)of CP(Wp=0%,0.5%,1%and 5%,respectively),were adopted to treat cyanide-containing wastewater.PFSC5 exhibited superior coagulation performances at optimal conditions:the removal of total cyanide(TCN)and chemical oxygen demand(COD)was 95%–97%and 50%–55%,respectively.The effects of CP on the properties and structure of flocs were investigated by laser diffraction instrument and small-angle laser light scattering(SALLS),respectively.The results show that the flocs of PFSC5 have higher growth rate,higher strength factor and lower recovery factor than other flocs.They are also much denser and more uniform owing to the higher fractal dimension(Df)and less microflocs(10–100 m).Furthermore,the dense structure of the PFSC5 flocs can be restored after shear and is more resistant to hydraulic conditions.Particularly,detailed morphology evolution of the flocs was in-situ detected by on-line particle imaging.Due to strong ionic strength in wastewater,the CP in PFSC5 plays a significant role of adsorption,while the main mechanism of CP is electrostatic patch aggregation during the PFSC05 systems.     

Synthesis and photovoltaic properties of a star-shaped molecule based on a triphenylamine core and branched terthiophene end groups

A new star-shaped donor-acceptor molecule has been synthesized for application as the donor material in solution-processed bulk-heterojunction organic solar cells (OSCs). The molecule consists of a triphenylamine (TPA) unit as the core and a donor unit with three arms containing benzo[1,2,5]thiadiazole (BT) acceptor units and 5,5’’-dihexyl-2,2′:3′,2″-terthiophene (tTh) end groups. The molecule, denoted S(TPA-BT-tTh), exhibits a broad absorption band in the wavelength range 300-650 nm and high hole mobility of 1.1×10 -4 cm2 V -1 s 1 . An OSC device based on S(TPA-BT-tTh) as donor and [6,6]-phenyl C71 -butyric acid methyl ester (PC 70 BM) as the acceptor (1:3, w/w) exhibited a power conversion efficiency of 2.28% with a short circuit current density of 6.39 mA/cm2 under illumination of AM.1.5, 100 mW/cm2 .     

量子态选择的分子离子解离动力学：阈值光电子-光离子符合成像技术的应用

阈值光电子一光离子符合速度成像技术通过对光电子和符合的光离子同时进行速度聚焦控制,大幅提高了电子和离子的收集效率和离子平动能分辨率,成为开展气相分子光电离和光电离．解离动力学研究的有效工具．利用该技术,我们精确地测量了分子的电离能、离子出现势等重要参数,并且开展了若干具有量子态或内能选择的离子解离动力学研究,描绘了相关势能面存在浅势阱等重要动力学特征,讨论了不同振动态和电子态的激发对解离机理和产物通道的重要影响．     

Trigonal‐Bipyramidal and Square‐Pyramidal Chromium?Manganese Chalcogenide Clusters, [E2CrMn2(CO)n]2− (E=S,Se, Te; n=9, 10): Synthesis,Electrochemistry, UV/Vis Absorption,and Computational Studies

The reactions of E powder (E=S, Se) with a mixture of Cr(CO)₆ and Mn₂(CO)₁₀ in concentrated solutions of KOH/MeOH produced two new mixed Cr? Mn? carbonyl clusters, [E₂CrMn₂(CO)₉]^2? (E=S, 1 ; Se, 2 ). Clusters 1 and 2 were isostructural with one another and each displayed a trigonal‐bipyramidal structure, with the CrMn₂ triangle axially capped by two μ₃‐E atoms. The analogous telluride cluster, [Te₂CrMn₂(CO)₉]^2? ( 3 ), was obtained from the ring‐closure of Te₂Mn₂ ring complex [Te₂Mn₂Cr₂(CO)₁₈]^2? ( 4 ). Upon bubbling with CO, clusters 2 and 3 were readily converted into square‐pyramidal clusters, [E₂CrMn₂(CO)₁₀]^2? (E=Se, 5 ; Te, 6 ), accompanied with the cleavage of one Cr? Mn bond. According to SQUID analysis, cluster 6 was paramagnetic, with S=1 at room temperature; however, the Se analogue ( 5 ) was spectroscopically proposed to be diamagnetic, as verified by TD‐DFT calculations. Cluster 6 could be further carbonylated, with cleavage of the Mn? Mn bond to produce a new arachno‐cluster, [Te₂CrMn₂(CO)₁₁]^2? ( 7 ). The formation and structural isomers, as well as electrochemistry and UV/Vis absorption, of these clusters were also elucidated by DFT calculations.