电流控阈技术及二值 I2L 施密特电路设计

电流控阈技术及二值Ｉ~２Ｌ施密特电路设计黄瑞祥，杭国强（杭州大学电子工程系杭州３１００２８）在数字电路中，以往对施密特电路的分析与研究大多局限于用电压信号来表示逻辑值的电路，例如ＴＴＬ、ＣＭＯＳ、ＥＣＬ等电路［１－３］．然而，对于以电流为信号的电流型?..     

喷雾干燥-高温固相法制备纳米LiFePO4与LiFePO4/C材料及性能研究

采用喷雾干燥-高温固相法制备纳米LiFePO₄与LiFePO₄/C正极材料，用X-射线衍射，扫描电镜等对合成材料进行了表征，并对以LiFePO₄为正极的电池进行了电化学性能测试。结果表明:材料合成最佳煅烧温度为600 ℃;合成过程中由于碳对LiFePO₄晶型的生长有一定的抑制作用，相对于纯LiFePO₄材料，LiFePO₄/C材料粒径更小;并且，在此最佳合成温度下合成的LiF     

高分辨阿达玛变换显微荧光图像分析(Ⅱ)单细胞DNA荧光图像生成、处理及自动定量分析研究

本研究把荧光显微镜，阿达玛变换多通道成像技术和计算机图象处理技术结合起来，建立了一种单细胞DNA荧光图像自动定量分析系统，对系统的成像原理、信号编码和解码方法及单细胞定量分析方法进行了讨论，分析结果表明，本系统提供的单细胞定量分析数据稳定可靠。     

比光谱-导数吸光光度法及其应用与进展

综述了比光谱－导数吸光光度法的基本原理、主要试验条件的选择及其在多组分混合物同时测定中的应用与进展。全文共引用了参考文献50篇。     

舒兰褐煤树脂组分中某些分离物的化学研究

我国褐煤资源丰富 ,分布于云南、吉林、黑龙江、山东和内蒙古等地。褐煤除作燃料和腐植肥料外 ,还应用于轻化工和机械工业 ,如从褐煤制取褐煤蜡。褐煤蜡中含有较多的树脂物质 ,影响了褐煤蜡的质量 ,因此通常褐煤蜡树脂作为废弃物脱除 ,以提高褐煤蜡的质量。褐煤蜡的化学组成为纯蜡和树脂 ,前者为高碳脂肪酸和脂肪醇的酯类、游离脂肪酸和脂肪醇 ,以及烃类物等 ;后者则以萜类为主 ,并含有甾醇、羟基酸和烃化合物[1～ 5] 。 1982年唐运千等采用红外光谱和氢核磁共振谱检定 ,褐煤树脂中含有 β 谷甾醇 ;柱层析和薄层层析检出雌二醇和雌酚酮[2 ] …     

手性配体立体选择性萃取分离扁桃酸对映体

Based on chiral ligand exchange, the distribution behavior of mandelic acid enantiomers in the two-phase system containing copper ion(Ⅱ)(Cu²⁺) and N-n-dedecane-L-hydroxyproline (L), was studied. At different pH, the partition of Cu²⁺ in the two-phase system containing N-n-dedecane-L-hydroxyproline, was investigated. The formation constant of binary cpmplex(Li₂Cu) was obtained by regression. The influence of pH, concentrations of Cu²⁺ and chiral ligand, and solvents on partition coefficients(K) and separation factor(α), was discussed. The experimental results show that Li forms more stable ternary complex with D-mandelic acid than with L- mandelic acid. There is a large influence of pH on K and α. At low pH values (<3.5), formation of binary complexes is thermodynamically unfavourable. K and α are best when pH values are above 3.5 and the molar ratio of chiral ligand to Cu²⁺ is 2∶1. At the same time, solvents influence K and α very much.     

LiCoO2中锂离子固相扩散系数随循环次数的变化

The solid diffusion coefficient of lithium-ion in LiCoO₂ cathode material has been investigated by the capacity intermittent titration technique (CITT) at different voltages and at different charge/discharge cycles. By SEM, XRD and FTIR techniques, the structure of LiCoO₂ was studied before and after charge-discharge cycles, and the relationship between solid diffusion coefficient and crystal structure was further discussed. CITT results show that the value of Li⁺ solid diffusion coefficient of LiCoO₂ is about 10^-12 cm²·s^-1. During the whole charge-discharge cycles, the Li⁺ solid diffusion coefficient decreased within the voltage of 4.0～4.3 V, which is attributed to the change of the structure of LiCoO₂.     

多硫二硫醇烯配合物[Ni(C5S9)2]电磁学性能的研究

多硫 1 ,2 二硫醇烯能与过渡金属离子形成具有特殊平面共轭结构的稳定配合物 ,是构成有机导体或超导体的基本“砖块”[1,2 ] 。配合物的晶体结构研究表明 ,分子之间通过Ｓ…Ｓ原子ｐ轨道的重叠而存在的超分子相互作用是配合物具有高导电性的一个重要特征[3 ] 。增加分子间超分子相互作用的一个有效方法是增加配体上硫原子的个数。我们以Ｃ6Ｓ10 (图 1 )为中间体得到Ｃ5Ｓ2 -9(图2 ) ,与Ｎｉ2 + 离子配位后在四种不同阳离子作用下生成 (Ｃａｔ)2 [Ｎｉ(Ｃ5Ｓ9)2 ]型二价阴离子配合物。当这些配合物用Ｉ2 氧化时都生成了中性配位化合物 [Ｎｉ…     

Current Trend in Synthesis,Post‐Synthetic Modifications and Biological Applications of Nanometal‐Organic Frameworks (NMOFs)

Since the early reports of MOFs and their interesting properties, research involving these materials has grown wide in scope and applications. Various synthetic approaches have ensued in view of obtaining materials with optimised properties, the extensive scope of application spanning from energy, gas sorption, catalysis biological applications has meant exponentially evolved over the years. The far‐reaching synthetic and PSM approaches and porosity control possibilities have continued to serve as a motivation for research on these materials. With respect to the biological applications, MOFs have shown promise as good candidates in applications involving drug delivery, BioMOFs, sensing, imaging amongst others. Despite being a while away from successful entry into the market, observed results in sensing, drug delivery, and imaging put these materials on the spot light as candidates poised to usher in a revolution in biology. In this regard, this review article focuses current approaches in synthesis, post functionalization and biological applications of these materials with particular attention on drug delivery, imaging, sensing and BioMOFs.