Intrinsic Localized Spin-Wave Modes in an Anisotropic Ferromagnet with Dzyaloshinsky-Moriya Interaction

The existence and properties of intrinsic localized spin-wave modes in a ferromagnetic XXZ spin chain with Dzyaloshinsky-Moriya interaction are investigated analytically in the semiclassical limit. The model Hamiltonian is quantized by introducing the Dyson-Maleev transformation and the coherent state representation is chosen as the basic representation of the system. By making use of the method of multiple scales combined with a quasidiscreteness approximation, the equation of motion for the coherent-state amplitude is reduced to the nonlinear Schrödinger equation. It is shown that a bright intrinsic localized spin-wave mode whose eigenfrequency lies below the bottom of the magnon frequency band can exist in the ferromagnetic system. We also show that the system can produce a dark intrinsic localized spin-wave mode, i.e., nonpropagating kink, whose eigenfrequency is below the upper of the magnon frequency band. In addition, we find that the introduction of the Dzyaloshinsky-Moriya interaction changes wave numbers in the Brillouin-zone corresponding to the appearance of intrinsic localized spin-wave modes.     

ICP-AES测定7种花茶中8种微量元素的含量和溶出率

采用微波消解样品,电感耦合等离子体-原子发射光谱法测定了金银花、玫瑰茄、玉蝴蝶、仙人草、菊花、薰衣草、腊梅等7种花茶中Fe、Mn、Cu、Zn、Ni、Cr、Cd和Pb等元素的含量及其溶出率。结果表明,花茶中Fe含量较高,重金属Cr、Cd和Pb含量普遍较低,花茶中Cu、Zn、Mn和Ni的溶出率相对较高,Fe的溶出率较低,有害的重金属Cd、Pb和Cr的溶出率很低,此测定结果可为探讨花茶的保健作用与微量元素的相关性提供科学数据。     

Y系超导螺管储能磁体的优化设计

磁体结构的好坏将直接关系到磁体的制造成本以及磁体能否正常运行.在磁体结构的优化设计中,选定磁体的体积为目标函数,在满足磁体储能,符合超导材料的B～J特性,尽量减小漏磁等条件下,使目标函数达到最小.文章选定新一带超导涂层导体YBCO为SMES线圈的制造材料,分析了Y系带材的材料特性,并采用大型有限元仿真软件ANSYS和磁体优化中常用的算法-模拟退火算法(simulated annealing)对SMES线圈进行优化仿真分析,得出最优的磁体结构.     

3 ω线法测量液体热参数影响因素分析

首先给出基于谐波探测技术测量液体导热系数和热扩散系数的3ω线法的基本原理.采用实验和理论分析相结合的方法,分析了加热丝结构参数和自身热参数对温度波动和测量结果的影响.给出了加热丝直径和长度的合理范围.液体导热系数比较小时可以利用三次谐波的实部和虚部的交点测量液体的比热容.     

工科物理实验教学改革的实践与探索

介绍了近年来华中科技大学物理实验中心教学改革的历程及构建物理实验创新基地的思路和体会．     

First-principles study of lithium intercalated bilayer graphene

Lithium intercalated bilayer graphene has been investigated using first-principles density functional theory calculations. Results show that there exist AB and AA stacking sequences for bilayer graphene in which the latter is more favorable for the Li storage and the former will evolve into the latter with the intercalation of Li ions. The relationship between the interlayer distance of two graphene sheets and the intercalated capacity of Li ions is discussed. It is found that structural defect is identified to store Li ions more favorably than pristine bilayer graphene and an isolated C atom vacancy in bilayer graphene can capture three Li ions between two graphene sheets.     

丙烷-氢气-空气预混层流燃烧特性研究

利用高速纹影摄像法和球型发展火焰研究了常温常压下丙烷-氢气-空气预混层流燃烧特性,获得了不同氢气体积分数和当量比下混合气的层流燃烧速率、Markstein数、Zeldovich数和Lewis数.结果表明:随着氢气比例的提高,层流燃烧速率增加,火焰厚度降低;当氢气体积分数小于60%时,随着当量比的增加,Markstein数降低,当氢气体积分数大于60%时,随着当量比的增加,Markstein数增加.当量比小于1.2时,随着氢气比例增加,Markstein数降低.当量比大于1.2时,随着氢气比例增加,Markstein数增加.随着氢气比例的增加,Zeldovich数降低,全局Lewis数降低.     

超短脉冲在光子晶体中传播时的色散参量

利用最小二乘拟合法分析了光子晶体的能带结构,定量分析了二维光子晶体的色散参量.为了考虑脉冲各频率的作用,通过引入与频率分量相关的权重因子,从而解析了群速度和平均群速度色散,进而解析出脉冲波络渐变的理论结果.通过FDTD数值模拟后,发现数值模拟结果与理论解析结果完全相吻合.本文处理光子晶体的色散参量的方法,为制作光子晶体色散器件如光子晶体色散补偿器、脉冲展宽和压缩器有一定的借鉴作用.     

棱镜-光栅-棱镜分光模块整体化设计及衍射特性分析

PGP模块是超光谱成像仪中重要分光器件。为了能够在制作前有效预测PGP整个系统的衍射效率分布及其衍射特性,提出了PGP整体化设计方法。从体位相全息光栅设计角度出发,结合棱镜与光栅各项参数的制约关系,编制了计算PGP整体衍射效率的分析软件,综合考察了棱镜与光栅各项参数对PGP模块衍射特性的影响,讨论了光栅布拉格波长的漂移特性,据此设计了一种用于成像光谱仪的宽波段高衍射效率PGP分光模块。模拟结果表明：棱镜1材料的色散系数越小,PGP的光谱带宽越窄;光栅布拉格波长的漂移增大了PGP模块和光栅的光谱带宽,带宽增大使光栅的角度选择性随之增大,拓宽了棱镜1材料的选择要求;棱镜1顶角、光栅的胶层厚度和相对介电常数调制度等参数是影响PGP衍射效率分布的重要因素,制作时需要精确控制。利用此方法设计的PGP分光模块在400～1 000 nm波段范围内衍射效率不低于50%,并给出具体设计参数,这对PGP制作具有一定的参考价值。