Photodegradation of a 1,3,4-thiadiazole-urea herbicide. Isolation,characterization, X-ray crystal structure and synthesis of photoproducts

The photodegradation of 1,3-dimethyl-1-(2-(3-fluorobenzylthio)-1,3,4-thiadiazol-5-yl)urea as a thin film and in solution is described. The two photoproducts from thin-film photolysis were characterized by spectral and synthetic methods. The X-ray crystal structure of one of the photoproducts is also reported. The rearrangements were shown to involve an S-to-N benzyl migration, followed by a sulfur-oxygen substitution.     

Bis(1,2-bis(diphenylphosphino)ethane)tungsten(0) Complexes Containing Electron-Saturated Metal Centers and Singly-Coordinated Bridging Ligands

Reaction of 1,4-diisocyanobenzene or 4-isocyanobenzonitrile with trans-W(N(2))(2)(DPPE)(2) (DPPE = 1,2-bis(diphenylphosphino)ethane) produced cis-WL(2)(DPPE)(2), where L = 1,4-diisocyanobenzene or 4-isocyanobenzonitrile. cis-(CNC(6)H(4)NC)(2)W(DPPE)(2) crystallizes in the triclinic space group P&onemacr;, with a = 12.848(3) ?, b = 13.596(3) ?, c = 19.072(3) ?, alpha = 78.99(2) degrees, beta = 70.66(2) degrees, gamma = 65.26(2) degrees, V = 2849.8(11) ?(3), and Z = 2. cis-(NCC(6)H(4)NC)(2)W(DPPE)(2) crystallizes in the triclinic space group P&onemacr;, with a = 12.712(3) ?, b = 13.700(3) ?, c = 19.109(3) ?, alpha = 77.91(2) degrees, beta = 70.63(2) degrees, gamma = 64.76(2) degrees, V = 2830.7(13) ?(3), and Z = 2. Both compounds possess a distorted octahedral geometry about the metal center, with the two isocyanide ligands cis to one another. The isocyanide ligands are substantially bent along the CNC axis of the isocyanide group coordinated to tungsten. For the complex containing the symmetric ligand, CNC(6)H(4)NC, the mean CNC angle for the coordinated end of the isocyanide is 139.1(11) degrees, the average W-C bond length is 1.86(1) ?, and the C&tbd1;N bond lengths have a mean value of 1.30(2) ?. These data indicate substantial back-donation from an electron-saturated tungsten atom. This is supported spectroscopically, with substantial shifts to lower wavenumbers for the C-N stretching frequencies of the coordinated isocyanide groups. Similar trends are observed in cis-(NCC(6)H(4)NC)(2)W(DPPE)(2). Both compounds contain electron-rich metals surrounded by large ligands which apparently protect the metals from atmospheric oxidation. The isocyanide ligands in both complexes contain a second coordinating group pointing away from the metal into the environment surrounding the molecules, providing the potential for polymetallic complexes containing metals in a variety of oxidation states.     

2,6-di-tert-butyl-4-perimidylphenols and their oxidation

1,8-Naphthylenediamine was reacted with 2,6-di-tert-butyl-4-formyl-phenol to produce 2,6-di-tert-butyl-4-(1,3-dihydro-perimidyl) phenol (I). The latter was coverted into 2,6-di-tert-butyl-4-(1H-perimidyl)phenol (II) by oxidizing I with sodium pyrosulfate. When phenol II was oxidized by lead dioxide in toluene and THF, the EPR spectra revealed a 12-component multiplet with perimidyl splitting constants a¹ _N=a³ _N=a_H ^NH=0.2 mT; a_H ^6.7=0.6 mT.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 28, No. 1, pp. 64–67, January, 1992.     

Organophosphorus reagents as extractants-part 3. Synergic effect of triphenyl phosphine oxide and bis(diphenyl phosphinyl) alkanes on extraction of iron(III) from thiocyanate medium with 2,4-pentdione

The extraction of iron(III) from thiocyanate medium was carried out with a synergic combination of 2,4-pentdione (Hacac) and either triphenyl phosphine oxide (Ph(3) PO) or bis (diphenylphosphinyl) alkanes, Ph(2)P(O)(CH(2))(n).P(O)PH(2) [ligand abbreviation, n: dpeO(2), 2; dpbO(2), 4]. Iron(III) was quantitatively separated from its binary mixture with chromium(III), manganese(III), cobalt(II), nickel(II), zinc(II), cadmium(II), mercury(II), lead(II), magnesium(II) and from steel samples. Copper(II) and silver(I) however, interfered. The percentage extraction was 99.0%. The respective extraction constants, K(HA), K(L) or K(syn), for the extracted species, [Fe(NCS)(acac)(2)(H(2)O)] (HA Hacac), Fe(NCS)(3)L(2) [L b Ph(3)PO, dpeO(2) or dpbO(2)], or Fe(NCS)(acac)(2)L were found to be: K(HA), 1.48 x 10(3), K(L), 1.80 x 10(2) (L Ph(3)PO), 2.02 x 10(2) (L dpeO(2) or dpbO(2)) and K(syn), 1.87 x 10(6) (L Ph(3)PO), 2.56 x 10(6) [L dpeO(2) or dpbO(2)].     

Effect of modified fibre glass on the structure and thermophysical properties of pentaplast(pentane)

The results of experimental investigations of the effects of ground fibre glass on the structural parameters and thermophysical characteristics of pentaplast(pentane) were assessed.The degree of crystallinity, thermal conductivity, specific heat and density of pentaplast containing various amounts of modified fibre glass were determined experimentally.The results obtained are discussed in terms of modern theories of the effects of fillers on the properties and structures of polymers.

---

Zusammenfassung Es werden die Ergebnisse der experimentellen Untersuchungen des Einfl usses von gemahlenem Fiberglas auf die Strukturparameter und thermophysikalischen Eigenschaften von Pentaplast (Pentan) gewertet.Der Kristallinitätsgrad, das Wärmeleitvermögen, die spezifische Wärme und die Dichte von Pentaplast mit verschiedenem Gehalt an modifiziertem Fiberglas wurde experimentell ermittelt.Die erhaltenen Ergebnisse wurden hinsichtlich moderner Theorien über den Einfluß von Streckmitteln auf die Eigenschaften und die Struktur von Polymeren diskutiert.

     

Enzymatic sulfation of polyphenols related to tannins by arylsulfotransferase.

This report discusses a novel type of arylsulfotransferase (AST) which was derived from human intestinal bacterium sulfated polyphenolic compounds when p-nitrophenyl sulfate (PNS) was taken as a donor substrate. (+)-Catechin, (+/-)-catechin, (-)-epicatechin and (-)-epicatechin gallate were better substrates than tyramine. (-)-Epigallocatechin and (-)-epigallocatechin gallate were slightly worse substrates than tyramine. Although gallic acid was a bad substrate, alkyl gallate esters were better substrates than tyramine. The degree of acceptor specificity increased in proportion to the length of the alkyl group up to the carbon number of five. Pedunculagin, geraniin and corilagin were less effective than tyramine. Rosmarinic acid and penta-O-galloyl-beta-D-glucose were similarly well sulfated. Two products, 4'-monosulfate and 4',5-disulfate of (+)-catechin, were detected at a two-fold molar excess of PNS over (+)-catechin. When (+)-catechin-4'-monosulfate as an acceptor was enzymatically sulfated with PNS as a donor, only the 4',5-disulfate was produced. Thus, arylsulfotransferase was useful for the convenient preparation of sulfate esters of polyphenols at their specific hydroxyl groups.     

Simultaneous separation and determination (in serum) of phenytoin and carbamazepine and their deuterated analogues by high-performance liquid chromatography--ultraviolet detection for tracer studies

The use of stable isotope-labeled tracer compounds is the safest and most effective method to perform many steady state pharmacokinetic and drug interaction studies. We describe a method by which the heavily deuterated 2H10 analogues of carbamazepine (2H10 CBZ) and phenytoin (2H10 PHT) can be chromatographically separated by high-performance liquid chromatography from unlabeled CBZ and PHT. All compounds are quantitated against an internal standard (IS) (10,11-dihydrocarbamazepine) and measured using conventional UV detection rather than mass spectrometry. Baseline resolution of extracted serum containing 2H10 CBZ, CBZ, 2H10 PHT, PHT and IS is achieved on a heated (55 degrees C) 25 cm x 4.6 mm BioAnalytical Systems Phase II 5 microns ODS column with an isocratic mobile phase consisting of water-acetonitrile-tetrahydrofuran (80:16:4, v/v/v) at 1.2 ml/min. Eluting compounds were monitored at a UV wavelength of 214 nm. Calculated resolution of 2H10 CBZ from CBZ and of 2H10 PHT from PHT were 1.3. Serum standard curves were linear (R greater than or equal to 0.999) over a range of 0.5-14 micrograms/ml for 2H10 CBZ, 0.5-20 micrograms/ml for CBZ, 0.5-20 micrograms/ml for 2H10 PHT, and 0.5-30 micrograms/ml for PHT. Within-day percent relative standard deviations (precision) were less than 6% in all cases.     

Correlation of the position of the bond functions in H-X with electronegativity

S type Gaussian bond functions are optimized for HF, H₂O, NH₃, and CH₄. The optimization is carried out with respect to the exponent and position in the H-X bond. The position is found to correlate well with the electronegativity of Pauling and Allred-Rochow.     

Analyse theoretique des lois cinetiques couramment utilisees en thermoanalyse pour l'etude des reactions solid-gaz. III. proposition d'une nouvelle methode d'approche en regime dynamique

Résumé Dans la première partie de ce travail, les auteurs mettent en évidence que la vitesse d'une réaction en régime non isotherme dépend d'un facteur supplémentaire: le régime de montée en température. Cette assertion est basée sur le fait que le taux de réactionx est une fonction de trois variables: températureT, tempst, et vitesse de chauffeT, variable qui n'avait pas été prise en considération jusqu'ici par les autres auteurs travaillant sur ce problème.Puis, se basant sur les deux hypothèses suivantes: a) l'équation de vitesse en régime isotherme est la forme limite de l'équation de vitesse en régime dynamique, b) la variation de température en régime dynamique affecte la fréquence d'apparition des germes de la nouvelle phase, une formulation théorique des loisg(x) est proposée pour le régime non-isotherme. Cette formulation est explicitée en fonction de l'écart, à une température donnée, entre les valeurs de Lnk _i (isotherme) et Lnk _d (dynamique) dans le diagramme Lnk = f(1/T).L'étude, par thermogravimétrie, de la décomposition du gypse, du sulfate de calcium semihydraté, et de l'oxalate de calcium monohydraté, réalisée en montée linéaire de température, permet de vérifier expérimentalement la formulation théorique proposée.Pour obtenir une bonne interprétation cinétique d'une réaction chimique en régime dynamique, la vitesse de chauffe ne doit pas excéder 20°/heure.

---

In the first part of this paper, the authors point out that the rate of reaction with non-isothermal kinetics depends on a supplementary factor: the heating rate. This assertion is based on the fact that the degreex of reaction is a function of three variables:T (temperature),t (time) andT (heating rate); this was not taken into account by other authors concerned with the subject.Then from the two following hypotheses: a) the rate equation for isothermal conditions is the limit form of the rate equation for non-isothermal conditions, b) the temperature change under dynamic conditions affects the frequency of nucleus formation of the new phase, a theoretical formulation of non-isothermalg(x) laws is proposed. This formulation involves the value of the difference, at constant temperature, between Ink _i (isothermal) and In k_d (dynamic) in the Ink=f(1/T) diagram.The thermogravimetric study of the dehydration of gypsum, of calcium sulfate hemihydrate, and of calcium oxalate monohydrate, under non-isothermal conditions, allows experimental verification of the theoretical formulation proposed.For a good kinetic approach of a chemical reaction under dynamic conditions, the heating rate must not exceed 20°/hour.

---

Zusammenfassung Im ersten Teil dieser Arbeit wird von den Autoren bewiesen, daß die Geschwindigkeit einer Reaktion unter nicht-isothermen Bedingungen von einem zusätzlichen Faktor, den Bedingungen des Temperaturenstiegs, abhängt. Diese Behauptung beruht auf der Tatsache, daß der Reaktionsverlauf eine Funktion dreier Variablen ist: der TemperaturT, der Zeitt und der AufheizungsgeschwindigkeitT, wobei letztere Variable bisher von den auf diesem Gebiet arbeitenden Autoren außer Acht gelassen worden ist.Nachfolgend wird an Hand der zwei Voraussetzungen, daß a) die Geschwindigkeitsgleichung unter isothermen Bedingungen die Grenzform der Geschwindigkeitsgleichung unter dynamischen Bedingungen ist und b) die Temperaturänderung unter dynamischen Bedingungen sich auf die Erscheinungsfrequenz der Keime der neuen Phase auswirkt, eine theoretische Formulierung der Gesetzeg(x) für nicht-isotherme Bedingungen vorgeschlagen. Diese Formulierung wird als Funktion der Abweichung ausgedrückt, welche bei einer gegebenen Temperatur zwischen den Werten von Lnk _i (isotherm) und Lnk _d (dynamisch) im Diagramm Lnk=f(1/T) besteht.Die bei linearem Temperaturanstieg thermogravimetrisch durchgeführte Untersuchung der Zersetzung von Gips, von Calciumsulfat Semihydrat und von Calciumoxalat Monohydrat ermöglicht die vorgeschlagene theoretische Formulierung experimentell zu bestätigen.Um unter dynamischen Bedingungen eine gute kinetische Interpretation einer chemischen Reaktion zu erhalten, darf die Aufheizungsgeschwindigkeit den Wert von 20° pro Stunde nicht überschreiten.

---

, : . , : (),t () ' ( ), , . : ) ) t(x) . Lnk _j () Lnk _d ( ) Lnk=f(1/T) . , , . , 20° .