An estimation of the measurement uncertainty for an optical emission spectrometric method

 A validation procedure based on the ISO/IEC 17025 standard was used to demonstrate the long-term stability of a calibration process and to assess the measurement uncertainty of a standard test method for optical emission vacuum spectrometric analysis of carbon and low-alloy steel (ASTM E 415–99a). The validation was used to provide documented evidence that the selected method fulfils the requirements and that the method is ”fit for purpose”. A test for drift was applied to determine statistically whether the analytical results vary systematically with time. The accuracy and traceability of the optimised method were tested by an analysis of closely matched matrix certified reference materials (CRMs). The measurement uncertainty estimations took account of the precision study, the bias and its uncertainty, and the qualification of uncertainties not considered in the overall performance studies. Received: 2 November 2002 Accepted: 2 January 2003 Acknowledgement The author expresses gratitude to Dr. Aleš Fajgelj for helpful discussions during the 3rd Central European Conference on Reference Materials and Measurements. Presented at CERMM-3, Central European Reference Materials and Measurements Conference: The function of reference materials in the measurement process, May 30–June 1, 2002, Rogaška Slatina, Slovenia Correspondence to T. Drglin     

Dynamics of the surface layer in cyanobiphenyl-aerosil nanocomposites with a high silica density

Composites were prepared from an aerosil and 4-n-alkyl-4'cyanobiphenyls with five to eight carbon atoms in the alkyl chain. Their high silica density of ∼7 g aerosil in 1 cm³ of liquid crystal (LC) allows the observation of the behaviour of a thin cyanobiphenyl layer (having nearly a monolayer structure) on the silica particles. The systems are investigated by dielectric spectroscopy (10^-2-10⁹ Hz) in a large temperature range (220-370 K). All the composites show a (main) relaxation process at frequencies much lower than the processes observed for the bulk LC that was assigned to the dynamics of the molecules in the surface layer. The temperature dependence of its characteristic frequencies obeys the Vogel-Fulcher-Tammann law, which is found to be typical for glass-forming liquids. The quasi two-dimensional character of the glass transition in the surface layer is discussed for the first time. At the nematic-to-isotropic transition temperature of the bulk, the composites show a continuous decrease of the characteristic frequencies as a function of the alkyl chain length, while the bulk LCs show the well known odd-even behaviour. The magnitude and temperature dependence of the slow relaxation process in the composites (molecules on an outer surface) agree with those of the same molecules confined to the nanopores of molecular sieves (internal surface).     

Determination of formic and acetic acids in air by piezoelectric microweighing

The quantitative and kinetic parameters of sorption of formic and acetic acids on thin films of various modifiers of piezoelectric quartz resonator electrodes are determined. Parameters of film formation on the electrodes (application procedure and thickness) are optimized. Methods for joint and separate determination of formic and acetic acids in air by piezoelectric microweighing with single- and double-sensor devices are developed.     

High pressure elastic and plastic deformations of silica: In situ diamond anvil cell Raman experiments

Normal silica glass is usually referred to as low density amorphous silica as it can be converted to high density amorphous silica by a hydrostatic pressure (polyamorphic transition). In this work in situ Raman experiments are performed in a diamond anvil cell up to 18 GPa. The pressure effects on the structure of silica after successive compression decompression experiments are analyzed. The mode Grüneisen parameters corresponding to the elastic compression of high density amorphous silica are obtained and compared with those of normal silica. A reorganization of the high density amorphous silica below 3 GPa is evidenced.     

Predicting the onset of DNA supercoiling using a non-linear hemitropic elastic rod

Elastic rod models provide a means to interpret single molecule DNA experiments as well as predict DNA behavior under physiological conditions. Here we use an elastic rod model to predict the stability boundary (critical torque vs. applied tension) for single molecule DNA experiments in which the molecule is subjected to applied tension and twist. We discuss the shortcomings of the usual isotropic rod model. We then derive a consistent non-linear material law from the general representation for a hemitropic (chiral) rod. Finally, we present results of a standard bifurcation analysis predicting the stability boundary. We find results from the non-linear hemitropic rod to match the data closely.     

Geometry and electronic structure of a heterometallic cluster Mo<Subscript>2</Subscript>Mg<Subscript>2</Subscript> in different oxidation states of Mo: a DFT study

Reduction of tetranuclear heterometallic complex Mo₂Mg₂ was simulated using the B3LYP and PBE density functional methods. The results of geometry calculations of the initial complex [Mo^VIO₂Mg(MeOH)₂(OMe)₄]₂ and a partially reduced Mo^V complex are in good agreement with experimental data. The reduced Mo^III complex is characterized by a decrease in the binding energy of aqua ligands. Structural rearrangement of the complex with release of a coordination position at the Mo atoms requires small energy expenditure. One can assume that the reduction of the polynuclear complex causes overcrowding of its coordination sphere, which favors formation of dinitrogen complexes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 441–457, March, 2008.     

Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

Model based online diagnosis of unbalance and transverse fatigue crack in rotor systems

A model based technique for online identification of malfunctions in rotor systems is discussed. Presence of fault changes the dynamic behavior of the system. This change is taken into account by equivalent loads acting on the undamaged system model. Equivalent loads are fictitious forces and moments acting on the undamaged system model, which generate a dynamic behavior identical to that of the real damaged system. The mathematical representation of equivalent loads is referred to as Fault Model. The work focuses on developing a fault model for a transverse fatigue crack in shaft and testing it through simulated studies. The basic principle of the technique is validated for unbalance identification, through numerical simulations as well as by experiments on a real rotor system.     

Effect of lattice deformation and phase transitions on the electronic spectra of TlGaS<Subscript>2</Subscript>, TlGaSe<Subscript>2</Subscript>, and TlInS<Subscript>2</Subscript> layered semiconductors

The effect of the lattice deformation on the electronic spectra of TlGaS₂, TlGaSe₂, and TlInS₂ layered semiconductor crystals is analyzed. It is shown that changes in the band gap of these semiconductors due to thermal expansion and a change in the composition under hydrostatic or uniaxial pressure can be described within a unified model of the deformation potential. The main feature of this model is the inclusion of deformation potentials with different signs, which is characteristic of other semiconductors with a layered structure. An analysis of the lattice deformation of the studied semiconductors in terms of the proposed model of the deformation potential has revealed that, in the immediate vicinity of the phase transitions, the crystal lattice under pressure undergo an unusual deformation.