Effect of modified fibre glass on the structure and thermophysical properties of pentaplast(pentane)

The results of experimental investigations of the effects of ground fibre glass on the structural parameters and thermophysical characteristics of pentaplast(pentane) were assessed.The degree of crystallinity, thermal conductivity, specific heat and density of pentaplast containing various amounts of modified fibre glass were determined experimentally.The results obtained are discussed in terms of modern theories of the effects of fillers on the properties and structures of polymers.

---

Zusammenfassung Es werden die Ergebnisse der experimentellen Untersuchungen des Einfl usses von gemahlenem Fiberglas auf die Strukturparameter und thermophysikalischen Eigenschaften von Pentaplast (Pentan) gewertet.Der Kristallinitätsgrad, das Wärmeleitvermögen, die spezifische Wärme und die Dichte von Pentaplast mit verschiedenem Gehalt an modifiziertem Fiberglas wurde experimentell ermittelt.Die erhaltenen Ergebnisse wurden hinsichtlich moderner Theorien über den Einfluß von Streckmitteln auf die Eigenschaften und die Struktur von Polymeren diskutiert.

     

Enzymatic sulfation of polyphenols related to tannins by arylsulfotransferase.

This report discusses a novel type of arylsulfotransferase (AST) which was derived from human intestinal bacterium sulfated polyphenolic compounds when p-nitrophenyl sulfate (PNS) was taken as a donor substrate. (+)-Catechin, (+/-)-catechin, (-)-epicatechin and (-)-epicatechin gallate were better substrates than tyramine. (-)-Epigallocatechin and (-)-epigallocatechin gallate were slightly worse substrates than tyramine. Although gallic acid was a bad substrate, alkyl gallate esters were better substrates than tyramine. The degree of acceptor specificity increased in proportion to the length of the alkyl group up to the carbon number of five. Pedunculagin, geraniin and corilagin were less effective than tyramine. Rosmarinic acid and penta-O-galloyl-beta-D-glucose were similarly well sulfated. Two products, 4'-monosulfate and 4',5-disulfate of (+)-catechin, were detected at a two-fold molar excess of PNS over (+)-catechin. When (+)-catechin-4'-monosulfate as an acceptor was enzymatically sulfated with PNS as a donor, only the 4',5-disulfate was produced. Thus, arylsulfotransferase was useful for the convenient preparation of sulfate esters of polyphenols at their specific hydroxyl groups.     

Simultaneous separation and determination (in serum) of phenytoin and carbamazepine and their deuterated analogues by high-performance liquid chromatography--ultraviolet detection for tracer studies

The use of stable isotope-labeled tracer compounds is the safest and most effective method to perform many steady state pharmacokinetic and drug interaction studies. We describe a method by which the heavily deuterated 2H10 analogues of carbamazepine (2H10 CBZ) and phenytoin (2H10 PHT) can be chromatographically separated by high-performance liquid chromatography from unlabeled CBZ and PHT. All compounds are quantitated against an internal standard (IS) (10,11-dihydrocarbamazepine) and measured using conventional UV detection rather than mass spectrometry. Baseline resolution of extracted serum containing 2H10 CBZ, CBZ, 2H10 PHT, PHT and IS is achieved on a heated (55 degrees C) 25 cm x 4.6 mm BioAnalytical Systems Phase II 5 microns ODS column with an isocratic mobile phase consisting of water-acetonitrile-tetrahydrofuran (80:16:4, v/v/v) at 1.2 ml/min. Eluting compounds were monitored at a UV wavelength of 214 nm. Calculated resolution of 2H10 CBZ from CBZ and of 2H10 PHT from PHT were 1.3. Serum standard curves were linear (R greater than or equal to 0.999) over a range of 0.5-14 micrograms/ml for 2H10 CBZ, 0.5-20 micrograms/ml for CBZ, 0.5-20 micrograms/ml for 2H10 PHT, and 0.5-30 micrograms/ml for PHT. Within-day percent relative standard deviations (precision) were less than 6% in all cases.     

Correlation of the position of the bond functions in H-X with electronegativity

S type Gaussian bond functions are optimized for HF, H₂O, NH₃, and CH₄. The optimization is carried out with respect to the exponent and position in the H-X bond. The position is found to correlate well with the electronegativity of Pauling and Allred-Rochow.     

Peroxides of higher aliphatic ethers

The oxidation of higher aliphatic ethers with oxygen at 50° yields two peroxides as the main oxidation products for each ether, namely a dihydroperoxy-dialkyl ether and a dihydroperoxy-dialkyl peroxide. The mass spectra of these compounds are recorded and the main fragmentation pattern is discussed.     

Plant pectin substances. Methods of isolating pectin substances

Information is given on methods of isolating plant pectin substances from various raw-material sources, and the conditions for obtaining high-quality pectin are discussed.     

Structural equilibrium (S=0) ⇄ (S=1)and inversion of the configuration of the seven-membered saturated metal-containing ring in four-coordinate pyrazolealdiminate metal chelates of nickel(II) based on tetradentate ligands

¹H and¹³C NMR, x-ray structural analysis, and magnetic moment measurements have shown that in 5-thio(seleno)pyrazolealdiminate complexes of nickel(II) based on tetradentate ligands containing the fragment, with n=2, flattening of the chelate unit takes place in solution and in the solid state. A similar structure in which the diamine metal-containing ring has the twist-chair conformation is observed for the crystals of the complexes with n=4. For the complexes with n=4 in solution at a temperature below –50°C, rapid (on the NMR time scale) interconversion of the flattened (P) (S=0) and pseudotetrahedral (T) (S=1) structures is observed, not accompanied by inversion of the tetrahedral configuration of the metal atom. At temperatures above –50°C, in addition to the low-barrier reactions (T) (P), conversion of the seven-membered saturated metal-containing ring and inversion of the tetrahedral configuration of the Ni atom with activation barriers of 48–51 kJ/mole are observed.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 327–335, February, 1990.     

Simultaneous determination of p-hydroxylated and dihydrodiol metabolites of phenytoin in urine by high-performance liquid chromatography

Accurate urinary measurements of the two major metabolites of phenytoin, 5-(p-hydroxyphenyl)-5-phenylhydantoin (p-HPPH) and 5-(3,4-dihydroxy-cyclohexa-1,5-dienyl)-5-phenylhydantoin (dihydrodiol, DHD), are necessary for pharmacokinetic and drug-interaction studies of this commonly used antiepileptic drug. We describe a simple, rapid, acid hydrolysis, with liquid-liquid extraction and simultaneous isocratic reversed-phase high-performance liquid chromatography of p-HPPH and 5-(m-hydroxyphenyl)-5-phenylhydantoin (m-HPPH) (hydrolytic end product of DHD). p-HPPH and m-HPPH were quantitated against their separate respective internal standards of alphenal and tolylbarb. The mobile phase consisted of water-dioxane-tetrahydrofuran (80:15:5, v/v/v) at 2 ml/min and at 50 degrees C, with detection at 225 nm. Baseline separation was achieved by use of a 16 cm x 3.9 mm Nova-Pak C18 column and total analysis time of 12 min. p-HPPH and m-HPPH concentrations ranged from 10 to 200 and from 2 to 30 micrograms/ml, respectively, with between-day coefficients of variations of 3.3-4.5% and 2.2-5.1% for controls. All standard curves were linear with r values greater than 0.993. The DHD concentration was determined by multiplying m-HPPH concentrations by 2.3.     

Water in carbon nanotubes: adsorption isotherms and thermodynamic properties from molecular simulation

Grand canonical Monte Carlo simulations are performed to study the adsorption of water in single-walled (6:6), (8:8), (10:10), (12:12), and (20:20) carbon nanotubes in the 248-548 K temperature range. At room temperature the resulting adsorption isotherms in (10:10) and wider single-walled carbon nanotubes (SWCNs) are characterized by negligible water uptake at low pressures, sudden and complete pore filling once a threshold pressure is reached, and wide adsorption/desorption hysteresis loops. The width of the hysteresis loops decreases as pore diameter narrows and it becomes negligible for water adsorption in (8:8) and (6:6) SWCNs. Results for the isosteric heat of adsorption, density profiles along the pore axis and across the pore radii, order parameter across the pore radii, and x-ray diffraction patterns are presented. Layered structures are observed when the internal diameter of the nanotubes is commensurate to the establishment of a hydrogen-bonded network. The structure of water in (8:8) and (10:10) SWCNs is ordered when the temperature is 298 and 248 K, respectively. By simulating adsorption isotherms at various temperatures, the hysteresis critical temperature, e.g., the lowest temperature at which no hysteresis can be detected, is determined for water adsorbed in (20:20), (12:12), and (10:10) SWCNs. The hysteresis critical temperature is lower than the vapor-liquid critical temperature for bulk Simple Point Charge-Extended (SPCE) water model.