NMR and stereochemical studies of non aromatic heterocyclic compounds—II : 13C and 31P NMR of 2-methoxy-1,3,2-dioxaphosphorinanes

¹³C and ³¹P chemical shift data for eight 2-methoxy-1,3,2-dioxaphosphorinanes are reported. Examination of pairs of geometrical isomers, which differ only in the orientation of the OMe substituent on P^III, have shown that both the ³¹P and the ¹³C signals of C_4,6 atoms appear 3–4 ppm at higher field when the OMe is axial compared with the equatorial isomer. This observation can be associated with the 1–3 syn diaxial interaction between the phosphorus axial substituent and the axial hydrogens on C_4,6 and should thus constitute, in the future, a supplementary tool for the structural analysis of this kind of compound. Important long range δ effects were observed both on ¹³C and especially on ³¹P chemical shifts. It is suggested that the high field δ_e effects could reflect a direct stereoelectronic interaction between the P atom and the cyclic C-5 atom. This interpretation is supported by a study of the ³¹P…¹³C coupling constants and their stereochemical dependence.     

Extension de la méthode du «logarithme limite» [1] pour la détermination de la composition et de la constante de stabilité des complexes

A study of the conditions of applicability to weak complexes of the relation log x = v log V + log (β_v,cC^c) = f(logV), where V and C are variable and constant total concentrations of the constituants of the complexe, shows that for conditions other than C ? V, another function φ(log V) accounts better for the formation equilibrium of the complexe. From f(log V) and φ (log V) a relation t(log V) is derived whose simple analysis permits the determination of the composition and the stability constant of weak complexes. Applications are given to 1:1, 1:2, 2:2 composition.     

Modern state of the catalytic reforming of petrol fractions. Experience of manufacture and industrial exploitation of reforming catalysts of the PR series

Analysis of the modern state of catalytic reforming is performed. Comparative assessment of the efficiency of various technologies of the process is given and their distribution in Russia and abroad is shown. Experience of the modernization of reforming installations with periodic catalyst regeneration is summarized. The state of manufacture of reforming catalysts in our country and accumulated experience of the development of catalysts of the PR series are presented. Results of industrial exploitation of new domestic reforming catalysts are shown. On this basis comparative assessment of Russian and imported catalysts is given. Original Russian Text D.I. Kiryanov, M.D. Smolikov, V.V. Pashkov, A.G. Proskura, E.V. Zatolokina, I.E. Udras, A.S. Belyi, 2007, published in Russkii Khimicheskii Zhurnal, 2007, Vol. 51, No. 4, pp. 60–68.     

Some symmetry-induced isotope effects in the kinetics of recombination reactions

Symmetry-induced isotope effects in recombination and collision-induced dissociation reactions are discussed. Progress on understanding the anomalous isotope effects in ozone is reviewed. Then, calculations are performed for the simpler reaction xNe+yNe+H<-->xNeyNe+H, where x and y label either identical or different isotopes. The atomic masses in the model are chosen so that symmetry is the only difference between the systems. Starting from a single potential energy surface, the properties of the bound, quasibound, and continuum states of the neon dimer are calculated. Then, the vibration rotation infinite order sudden approximation is used to calculate cross sections for all possible inelastic and dissociative processes. A rate constant matrix that exactly satisfies detailed balance is constructed. It allows recombination to occur both via direct three-body collisions and via tunneling into the quasibound states of the energy transfer mechanism. The eigenvalue rate coefficients are determined. Significant isotope effects are clearly found, and their behavior depends on the pressure, temperature, and mechanism of the reaction. Both spin statistics and symmetry breaking produce isotope effects. Under most conditions the breaking of symmetry enhances the rates, but a wide spectrum of effects is observed; they range from isotope effects with a normal mass dependence to huge, mass-independent isotope effects to cancellation and even to reversal of the isotope effects. This is the first calculation of symmetry-induced isotope effects in recombination rates from first principles. The relevance of the present effects to ozone recombination is discussed.     

Evaluation of the Use of QSARS for Priority Setting and Risk Assessment

Abstract Impending changes in EEC legislation have accelerated the need to define the principles and practical considerations of the use of QSARs in priority setting and risk assessment. It is important to delineate the limitations of this approach and to review whether and how this information should be used in the risk assessment. The value and limitations of QSARs for use in priority setting and risk assessment will not be discussed in detail since the European Chemical Industry Ecology and Toxicology Centre (ECETOC) has only recently established a Task Force to tackle this issue. The terms of reference of the Task Force are: (1) compare the predictions obtained with QSARs to measured data using ECETOC databases and other sources of data and comment on the validity and applicability of such QSARs; (2) identify and review software packages which are available for accessing and using appropriate QSARs; (3) identify those aspects of environmental distribution, fate and effects where the further development of QSARs is desirable and feasible; and (4) provide a scientific basis for ECETOC's contribution to the activities of the European Chemicals Bureau (ECB) in this area. In this short paper, only an initial and personal evaluation is made of when and where to use QSARs in the priority setting and risk assessment process within the regulatory framework. Some critical remarks and suggestions are provided to guide future developments and integration of QSARs in the risk assessment process.     

The effect of the t-butyl substituent on polymer properties in homopolymer systems

The effect of a bulky substituent on properties of different homopolymers has been examined. The substituent is the t-butyl moiety attached to a benzene ring found in the repeat units of the homopolymers of polyesters, polyarylates, polyamides, and polyaramides. These polymers have been prepared by melt, solution, or interfacial techniques. The source of the t-butyl group is mainly from 5-t-butylisophthalic acid (5TBIA) and comparisons are generally made with corresponding homopolymers based on isophthalic acid. The effect of the t-butyl group is shown by comparison of the properties of these homopolymers. Thermal and mechanical (tensile and impact) properties, density, water absorption, solubility, and processability are discussed. Differences in these properties are attributed to the t-butyl group and are based on intermolecular and intramolecular interactions that include increased free volume, chain stiffening, and conformational changes.     

Synthesis of 4-alkyl-substituted 1,2,3,4-tetrahydropyrimidin-2-ones by the Biginelli reaction

p-Toluenesulfinic acid is an effective catalyst for condensation of acetoacetic ester with urea and aliphatic or aromatic aldehydes, leading to formation of 4-substituted 6-methyl-5-ethoxycarbonyl-1,2,3,4-tetrahydropyrimidin-2-ones.M. V. Lomonosov State Academy of Fine Chemical Technology, Moscow 117571, Russia. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 979–982, July, 1998.     

A spin-dependent unitary group approach to many-electron systems

In this article we derive a segment-level formula for the matrix elements of the U(2n) generators in a basis symmetry adapted to the subgroup U(n) × U(2) (i.e., spin-orbit basis), for the representations appropriate to many-electron systems. This enables the direct evaluation of the matrix elements of spin-dependent Hamiltonians.     

CHARGE TRANSFER ACROSS PIGMENTED BILAYER LIPID MEMBRANE AND ITS INTERFACES

Abstract— The technique of forming bilayer lipid membranes (BLM) has made it possible to study photoreactions of pigments in an environment that is much closer to those in photosynthetic and visual membranes. A pigmented BLM system with Mg²⁺-porphyrins as membrane-bound pigments and with ferricyanide and ferrocyanide as the aqueous electron acceptor and donor, respectively, was used to illustrate the photoelectric effects due to coupled interfacial charge transfer reactions.
The steady-state continuous photoresponse was studied by means of the voltage clamp method and a null current method. The independence of the pigment conductance channel and the ionic conductance channel was demonstrated. A tunable voltage clamp method was used to study the transient pulsed photoresponses. Such a measurement permits us to characterize the photosystem in terms of an equivalent circuit model which contains a novel chemical capacitance. Molecular interpretation of this equivalent circuit model was given.
A microscopic model based on the Gouy–Chapman theory and chemical kinetics calculation leads to an equivalent circuit which is also equivalent to the previous one. Generalization of this microscopic model further leads to a physical mechanism of the generation of the early receptor potential (ERP) in visual membranes. Relevance of pigmented BLM research to photosynthesis and other disciplines was also discussed.     

Effet sterique sur les vitesses de transfert protonique: cyclohexanols substitues dans le dimethylsulfoxyde

Steric effects on proton transfer from, and to, hydroxylic oxygen have been studied in a series of seventeen α-methyl and a-benzyl cyclohexanols in anhydrous DMSO, under both acid and base catalysed conditions, using dynamic MNR techniques. The protonation rate constants (k₁ ? 10⁶ M^-1 s^-1 at 25°C) obey a Taft-Ingold relationship, containing only a steric contribution E_s = E_s^OH + E_s^α, where: E_s^OH = 0 or 0.15 for an axial or equatorial hydroxyl respectively and E_s^α = ?0.070 (or ?0.115) for substituting an α-hydrogen by a methyl (or benzyl) group. An equatorial hydroxylic function is therefore 40% more reactive than its axial homologue. These kinetic data are fairly consistent with structural information resulting from IR spectroscopy (v_co and v_OH vibrations) and from NMR (hydroxylic chemical shifts and coupling constants).