Poly(vinyl chloride)-paste/clay nanocomposites: Investigation of thermal and morphological characteristics

The paper concentrates on poly(vinyl chloride) - PVC - from the point of nanocomposite characterisation through thermal degradation of samples, evolution of the changes caused by elevating temperature using TGA, FTIR and Congo Red methods combined with morphological characterisation by XRD and TEM analyses. A novel method of PVC-paste/nanocomposite preparation while processing was used. During preparation, PVC plasticizer was mixed with clay, both natural and organophilic, and the suspension was then compounded with the other components. Two factors were followed: effect of shearing alone, and in combination with temperature. As is presented, the type of nano-filler and its chemical modifier have obvious influence on final properties either thermal or morphological. Presented contribution follows previous part of investigation and brings further information from PVC-paste/nanocomposite field.     

Kinetics of polarization reversal in irradiated thin PZT films

The effect of irradiation with electrons and neutrons and of exposure to synchrotron radiation on cyclic switching of polarization in thin films of lead zirconate titanate Pb(Zr,Ti)O₃ (PZT) was studied. It is shown that variations in the shape of switching currents are due to the generation of a spatially nonuniform bound internal field with account for an increase in the rate of bulk screening caused by irradiation. A correlation between structural variations and the evolution of the switching current measured during and after irradiation is established.     

Fundamental aspects of initiated oxidation of tridecane and polyethylene in solutions

Specific features of the initiated oxidation of polyethylene and its low-molecular-weight analogue tridecane, associated with the occurrence of the process in the short-chain mode, were studied.     

Diffusive motion of iron microcrystals studied by Mössbauer spectroscopy

A new model is presented which explains well the dramatic decrease of the Mössbauer line intensities with raising temperatures for freely dispersed iron microscrystals. In contrast to other theories which consider mainly vibration to be responsible we discuss here the decrease in terms of large amplitude diffusive rotational or translational jumps of the particles. Such diffusive jumps lead — in agreement with the observation — to a strong reduction of the Mössbauer-intensity without broadening the line width in a noticeable way. The typical potential well for a diffusing particle in an equilibrium position is derived quantitatively to be 13 meV. The model might be important also for a new understanding of the dynamics of catalytic clusters either in contact with each other or with larger solid surfaces.Part of this work was supported by the DFG Sonderforschungsbereich 306, Konstanz     

Tunable properties of light propagation in photonic liquid crystal fibers

Tunable properties of light propagation in photonic crystal fibers filled with liquid crystals, called photonic liquid crystal fibers (PLCFs) are presented. The propagation properties of PLCFs strongly depend on contrast between refractive indices of the solid core (pure silica glass) and liquid crystals (LCs) filing the holes of the fiber. Due to relatively strong thermo-optical effect, we can change the refractive index of the LC by changing its temperature. Numerical analysis of light propagation in PLCF, based on two simulation methods, such as finite difference (FD) and multipole method (MM) is presented. The numerical results obtained are in good agreement with our earlier experimental results presented elsewhere [1].     

Nonstoichiometry and low-temperature magnetic properties of FeSi crystals

The results of experimental and theoretical studies of the low-temperature properties of FeSi crystals are presented. The specific features of the magnetic susceptibility are shown to be related to the superparamagnetic behavior of impurity clusters. The thermomagnetic hysteresis phenomena observed are explained using the model of exchange-coupled clusters.     

Variation of supramolecular structure of heat-resistant polyimide films during thermal treatment

Variation of the supramolecular structure of heat-resistant polymide films in the course of high-temperature treatment was studied by X-ray diffraction analysis and NMR spectroscopy in solids.     

High resolution X-ray diffraction of GaN grown on Si (1 1 1) by MOVPE

High temperature GaN layers have been grown on Si (1 1 1) substrate by metalorganic vapor phase epitaxy (MOVPE). AlN was used as a buffer layer and studied as a function of thickness and growth temperature. The growth was monitored by in situ laser reflectometry. High resolution X-ray diffraction (HRXRD) revealed that optimized monocrystalline GaN was obtained for a 40 nm AlN grown at 1080 °C. This is in good agreement with the results of morphological study by scanning electron microscopy (SEM) and also confirmed by atomic force microscopy (AFM) observations. The best morphology of AlN with columnar structure and lower rms surface roughness is greatly advantageous to the coalescence of the GaN epilayer. Symmetric and asymmetric GaN reflections were combined for twist and stress measurements in monocrystalline GaN. It was found that mosaicity and biaxial tensile stress are still high in 1.7 μm GaN. Curvature radius measurement was also done and correlated to the cracks observations over the GaN surface.     

Quadrupole interactions at 57Fe and 119Sn in 3d-metal antimonides

3d-metal antimonides: Fe_1+x Sb, N_+x Sb, Co_+x Sb and the (Ni_1?y Fe _y )Sb solid solution have been studied by the Mössbauer effect method at ⁵⁷Fe and ¹¹⁹Sn. It was found that the quadrupole interactions at the Fe and Sn nucleus in 3d-metal antimonides are very sensitive to the filling of different crystallographic sites with metal atoms. The metal atoms in trigonal-bipyramidal sites have a strong effect on the quadrupole splitting of ¹¹⁹Sn. They are nearest to anions (Sb or Sn) with the typical axial ratio of c/a = 1.25. The QS(x) dependence of ¹¹⁹ Sn in 3d-metal antimonides in the 0 ≤ x ≤ 0.1 concentration range can be used to determine x – the concentration of transition metal excess relative to the stoichiometric composition.     

Developing professional judgement with the aid of a ‘low-profile’ group support system

This paper reports positive results from an application of one type of group support system (GSS) to a training application. Reviews of the findings of other trials of GSS have been mixed, and inconclusive. We describe the results of a series of seven training sessions in a field-based application of group process support. The subjects were professionals working in various agencies concerned with the welfare of older people. A ‘low-profile’ type of group support system, based on wireless handsets, was used. This design enabled responses from each participant to be input and displayed anonymously. Each session was aimed at stimulating a dialogue focused on the reasons for differences of judgement, as displayed on a single projected feedback screen. Changes of individual judgements were recorded for subsequent analysis and comparison with already known ‘expert judgements’. Frequent changes of judgement were recorded. A significant proportion of these were related to an improvement, which could not be explained as simply the result of conforming behaviour. We propose that the mode of operation and design of a ‘low-profile’ GSS have the potential to create a learning environment by reducing personal anxieties while encouraging group-based learning with focussed conversation. We conclude that this type of GSS design is particularly suited to ‘selective’-type tasks in groups.