Anisotropic Elastic-Viscoplastic Properties at Finite Strains of Injection-Moulded Low-Density Polyethylene

Injection-moulding is one of the most common manufacturing processes used for polymers. In many applications, the mechanical properties of the product is of great importance. Injection-moulding of thin-walled polymer products tends to leave the polymer structure in a state where the mechanical properties are anisotropic, due to alignment of polymer chains along the melt flow direction. The anisotropic elastic-viscoplastic properties of low-density polyethylene, that has undergone an injection-moulding process, are therefore examined in the present work. Test specimens were punched out from injection-moulded plates and tested in uniaxial tension. Three in-plane material directions were investigated. Because of the small thickness of the plates, only the in-plane properties could be determined. Tensile tests with both monotonic and cyclic loading were performed, and the local strains on the surface of the test specimens were measured using image analysis. True stress vs. true strain diagrams were constructed, and the material response was evaluated using an elastic-viscoplasticity law. The components of the anisotropic compliance matrix were determined together with the direction-specific plastic hardening parameters.     

Synthesis of Polyol Tetrabromophthalate and Its Use as a Component for Preparing Foamed Polyurethanes of Reduced Flammability

A procedure was suggested for preparing brominated polyols of reduced viscosity for the synthesis of foamed polyurethanes of reduced flammability. The flame-retarding action of the synthesized polyol tetrabromophthalate in polyurethane was studied in comparison with that of other widely used flame retardants. Evaluation of the effect exerted on the flammability of the polurethane compound by the polyol tetrabromophthalate synthesized, melamine, and aluminum hydroxide shows that all the samples containing flame retardants are self-extinguishing. The shortest combustion time was observed for the sample containing 6% polyol tetrabromophthalate synthesized. The sample containing as a flame retardant additive solely the synthesized polyole tetrabromophthalate also exhibits the highest performance as a heat-insulating material from the viewpoint of thermal conductivity.

     

Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

Formation and pharmacological activity of silicon—chitosan-containing glycerohydrogels obtained by biomimetic mineralization

The biomimetic sol—gel synthesis of silicon—chitosan-containing glycerohydrogels was carried out using silicon tetraglycerolate as a precursor. It was found that chitosan accelerates gel formation in weakly acidic media. In more acidic media, the kinetics of the process changes according to the curve with a maximum, which can be attributed to different mechanisms of silanol condensation before and after the isoelectric point. The investigated silicon—chitosan-containing glycerohydrogels exhibit antibacterial, anti-inflammatory, and wound healing activity. The synthesized hybrid glycerohydrogels are promising materials for biomedical applications.     

Elemental distribution by synchrotron X-ray microfluorescence of prostate 3D cell culture

Prostate cancer is a highly prevalent disease and ranks second among malignant neoplasms that affect men around the world, behind lung cancer alone. Trace elements are very important and are involved in many cellular processes. The X-ray microfluorescence technique is an advanced tool of high spatial resolution, sensitivity, multielemental analysis, and nondestructiveness for trace element study. This study aimed to investigate the elemental distribution in spheroids obtained through the following human prostate cell lines using synchrotron X-ray microfluorescence: tumor cell line androgen independent (DU145), tumor cell line androgen dependent (LNCaP), and normal cell line (RWPE-1). The measurements were performed with a standard geometry of 45° of incidence, excited by a white beam using a pixel of 25 μm and an acquisition time of 300 ms/pixel at the X-ray fluorescence beamline at the Synchrotron Light National Laboratory (Campinas, Brazil). The synchrotron X-ray microfluorescence results showed differences between groups in all elements analyzed and suggested that further studies should be performed to understand the relationship of these trace elements with the progression and development of the disease.