Studies of tetracene- and pentacene-based organic thin-film transistors fabricated by the neutral cluster beam deposition method

The neutral cluster beam deposition (NCBD) method has been applied to produce and characterize organic thin-film transistors (OTFTs) based upon tetracene and pentacene molecules as active layers. Organic thin films were prepared by the NCBD method on hexamethyldisilazane (HMDS)-untreated and -pretreated silicon dioxide (SiO2) substrates at room temperature. The surface morphology and structures for the tetracene and pentacene thin films were examined by atomic force microscopy (AFM) and X-ray diffraction (XRD). The measurements demonstrate that the weakly bound and highly directional neutral cluster beams are efficient in producing high-quality single-crystalline thin films with uniform, smooth surfaces and that SiO2 surface treatment with HMDS enhances the crystallinity of the pentacene thin-film phase. Tetracene- and pentacene-based OTFTs with the top-contact structure showed typical source-drain current modulation behavior with different gate voltages. Device parameters such as hole carrier mobility, current on/off ratio, threshold voltage, and subthreshold slope have been derived from the current-voltage characteristics together with the effects of surface treatment with HMDS. In particular, the high field-effect room-temperature mobilities for the HMDS-untreated OTFTs are found to be comparable to the most widely reported values for the respective untreated tetracene and pentacene thin-film transistors. The device performance strongly correlates with the surface morphology, and the structural properties of the organic thin films are discussed.     

Composition-controlled synthesis of bimetallic gold-silver nanoparticles

This paper reports findings of an investigation of the synthesis of monolayer-capped binary gold-silver (AuAg) bimetallic nanoparticles that is aimed at understanding the control factors governing the formation of the bimetallic compositions. The synthesis of alkanethiolate-capped AuAg nanoparticles was carried out using two related synthetic protocols using aqueous sodium borohydride as a reducing agent. One involves a two-phase reduction of AuCl(4)(-), which is dissolved in organic solution, and Ag(+), which is dissolved in aqueous solution. The other protocol involves a two-phase reduction of AuCl(4)(-) and AgBr(2)(-), both of which are dissolved in the same organic solution. AuAg nanoparticles of 2-3 nm core sizes with different compositions in the range of 0-100% Au have been synthesized. The two synthetic routes were compared in terms of bimetallic composition and size properties. Our new findings have allowed us to establish the correlation between synthetic feeding of metals and metal compositions in the bimetallic nanoparticles, which have important implications to the exploration of gold-based bimetallic nanoparticles for constructing sensing and catalytic nanomaterials.     

Complexation of Fluvastatin Sodium with β-Cyclodextrin: NMR Spectroscopic Study in Solution

¹H NMR spectroscopic study of fluvastatin sodium (FLU), β-Cyclodextrin (β-CD) and their mixtures confirmed the formation of FLU/β-CD inclusion complex in solution. The stoichiometry of the complex was determined to be 1:1 and the overall binding constant (K _s) was calculated to be 340 M⁻¹. Two dimensional COSY, ROESY and DEPTO experiments were performed for the unambiguous assignment of aromatic proton resonances and it was found that two isomeric forms of FLU are present in solution. It was confirmed with the help of ROESY spectral data that only F-substituted aromatic ring penetrates the β-CD cavity and there is chiral differentiation by the β-CD as one of the isomer binds more strongly, which is indicated by the intensity of correlation peaks. The mode of penetration of the guest into the β-CD cavity was also established and structure of the complex has been proposed.     

Stable gaseous aziridinium ions

Gaseous protonated aziridine ions are produced at the threshold from β-phenoxyethylamine molecular ions. The evidence for this is collisional activation spectra, using various precursors (including labelled analogues) under electron impact and field ionization conditions. Partial conversion to the acyclic \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} {\rm CH = }\mathop {\rm N}\limits^ + {\rm H}_{\rm 2} $\end{document} isomer occurs at higher electron energies and is rationalized by means of a potential energy surface constructed from energetic data.     

Isotope‐Coded Affinity Tagging Technique Using Avidin Functional Affinity Electrophoresis: An Alternative to an Avidin Affinity Column

Avidin functional affinity electrophoresis (AFAEP) is substituted for an avidin affinity column (AAC) to capture biotinylated peptides in the Isotope‐Coded Affinity Tagging (ICAT) technique which is a valuable tool in quantitative proteomics. In this new technique, the AFAEP‐captured ICAT‐labeled biotinylated peptides are extracted with the biotin tag intact from the polyacrylamide gel piece with aqueous 95% formamide (pH 8.2) at 65 °C for 20 min, and then detected by a matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometer. Bovine serum albumin (BSA) and the ¹²C‐ and ¹³C‐ICAT reagents are used to test this AFAEP‐ICAT technique. The results show that both AFAEP and AAC methods provide quantitative information of the relative amounts of ¹²C‐ and ¹³C‐ICAT‐labeled biotinylated tryptic peptides of BSA in a sample. Compared with AAC, the AFAEP is cheaper to perform, more stringent in capturing the biotinylated peptides, and capable of simultaneously processing multiple samples.     

Effect of macropore convection on mass transfer in a bidisperse adsorbent particle

The importance of adsorption induced convection in the macropores of a bidisperse adsorbent particle is studied for a step change in mole fraction or total pressure at the surface of the particle. Material balance equations for a binary gas mixture are written for both the macropores and the macropores with allowance for convection in the macropores, which is described by Darcy's law. The coupled set o1' partial differential equations is solved by orthogonal collocation. The enhancement in mass transfer as a result of convection is assessed by comparing the fractional uptake curves obtained with and without allowance for convection. Both equilibrium-based and kinetic-based separation processes are considered. The effect of the presence of convection in determining the controlling diffusional resistance (macropore or micropore) is also examined. Due to inclusion of convection no single non-dimensional group alone can determine the relative importance of macropore and micropore resistances. Results show that convection can significantly affect the performance of an equilibrium-based macropore diffusion controlled process and that the enhancement in mass transfer is more for a particle with a high value of Darcy permeability.     

Synthesis and pharmacological activity of 4-(4'-(chlorophenyl)-4-hydroxypiperidine) derivatives

A new series of 4-(4'-chlorophenyl)-4-hydroxypiperidine derivatives (2-5), substituted at nitrogen, were synthesized and tested as potential analgesic compounds as well as evaluated for their effect on hypotensive activity. Results showed that all the derivatives exhibit significant analgesic activity in male Wistar rats at a dose of 50 mg/kg of body weight after intramuscular injection, when tested by thermal stimuli (tail flick test). Pethidine was used as reference drug. Compounds 2, 3 and 5 produced reduction in blood pressure in normotensive rat.     

2‐Hydro­xy‐3‐(4,5,6,7‐tetra­hydro‐1H‐imidazo­[4,5‐c]­pyridin‐5‐ium‐4‐yl)­benzoate monohydrate

The title mol­ecule, C₁₃H₁₃N₃O₃·H₂O, is in the form of a mono­hydrated zwitterion. The tetra­hydro­pyridinium ring adopts an envelope conformation and is nearly coplanar with the plane of the imidazoline ring. The water solvate mol­ecule plays an important role as a bridge between zwitterions, forming molecular chains running along the c direction, which are interconnected by N—H?O hydrogen bonds into molecular ribbons. The crystal packing is further stabilized by another N—H?O and one O—H?N hydrogen bond, which interconnect the molecular ribbons.     

Sorptive potential of sunflower stem for Cr(III) ions from aqueous solutions and its kinetic and thermodynamic profile

The sorptive potential of sunflower stem (180-300 μm) for Cr(III) ions has been investigated in detail. The maximum sorption (≥85%) of Cr(III) ions (70.2 μM) has been accomplished using 30 mg of high density sunflower stem in 10 min from 0.001 M nitric and 0.0001 M hydrochloric acid solutions. The accumulation of Cr(III) ions on the sorbent follows Dubinin-Radushkevich (D-R), Freundlich and Langmuir isotherms. The isotherm yields D-R saturation capacity X_m = 1.60 ± 0.23 mmol g⁻¹, β = −0.00654 ± 0.00017 kJ² mol⁻², mean free energy E = 8.74 ± 0.12 kJ mol⁻¹, Freundlich sorption capacity K_F = 0.24 ± 0.11 mol g⁻¹, 1/n = 0.90 ± 0.04 and of Langmuir constant K_L = 6800 ± 600 dm³ mol⁻¹ and C_m = 120 ± 18 μmol g⁻¹. The variation of sorption with temperature (283-323 K) gives ΔH = −23.3 ± 0.8 kJ mol⁻¹, ΔS = −64.0 ± 2.7 J mol⁻¹ K⁻¹ and ΔG_298k = −4.04 ± 0.09 kJ mol⁻¹. The negative enthalpy and free energy envisage exothermic and spontaneous nature of sorption, respectively. Bisulphate, Fe(III), molybdate, citrate, Fe(II), Y(III) suppress the sorption significantly. The selectivity studies indicate that Cr(III), Eu(III) and Tb(III) ions can be separated from Tc(VII) and I(I). Sunflower stem can be used for the preconcentration and removal of Cr(III) ions from aqueous medium. This cheaper and novel sorbent has potential applications in analytical and environmental chemistry, in water decontamination, industrial waste treatment and in pollution abatement. A possible mechanism of biosorption of Cr(III) ions onto the sunflower stem has been proposed.