Preparation and Characterization of Mixed‐Valent Nickel Oxide/Nickel Hexacyanoferrate Hybrid Films and Their Electrocatalytic Properties

Polynuclear mixed‐valent nickel oxide and nickel hexacyanoferrate hybrid film was prepared on glassy carbon electrode by multiple scan cyclic voltammetry. The film growth was monitored using electrochemical quartz crystal microbalance (EQCM). The cyclic voltammogram of the nickel hexacyanoferrate film is characterized by single redox couple whereas nickel oxide/nickel hexacyanoferrate hybrid film exhibits two redox couples. Cyclic voltammetric features suggest that the charge transfer process in both films resembles that of surface‐confined redox species. In stronger basic solution (pH ≥9), nickel hexacyanoferrate film was gradually converted into nickel oxide film during potentiodynamic cycling. The peak potential of nickel oxide redox couple moved into more negative side with increasing pH of contacting solution whereas the peak potential of nickel hexacyanoferrate redox couple remains the same. Electrocatalytic behavior of hybrid film coated electrodes toward ascorbic acid, hydrazine and hydroxylamine was investigated using cyclic voltammetry technique. Analytical application of nickel oxide/nickel hexacyanoferrate hybrid film electrode was tested in amperometry and flow injection analysis.     

水-乙醇二元体系共沸混合物的热力学研究

用全自动低温绝热量热计测定了水、乙醇以及水和乙醇组成的共沸混合物在不同温区的摩尔热容Cp,m. 建立了共沸混合物Cp,m与温度T的函数关系.结果表明,水和乙醇组成的共沸混合物在98.496 K发生玻璃态转化,在158.939 K 和270.95 K发生固-液相变.获得了其相应的相变焓和相变熵.计算了以298.15 K为基准的该共沸混合物的热力学函数和超额热力学函数.     

络合型催化剂丙烯聚合动力学研究

本工作对络合型(Solvay型)TiCl_3催化剂—(C_2H_5)_2AlCl体系丙烯聚合进行了活性中心浓度C_p、链增长速率常数k_p和链增长活化能E_p等的测定,并与常规TiCl_3·0.33AlCl_3进行了比较,C_p以动力学方法求取,数均分子量以粘度法测定经分子量分布校正,结果表明,络合型催化剂活性比常规催化剂高,不仅是由于C_p增高,在更大程度上是由于k_p提高。     

Aromatization of methane over different Mo-supported catalysts in the absence of oxygen

Both acidity and structure of the support are important factors in converting methane to aromatics. Lower SiO₂/Al₂O₃ ratio seems to favor the aromatization of methane over the Mo/HZSM-5 catalyst. When Pt is added as a modifier the activity of Mo/HZSM-5 catalyst will decrease slightly, but coke formation will enhanced.     

Catalytic Oxidation of Dimethyl Ether to Dimethoxymethane over Cs Modified HaPW12O40/SiO2 Catalysts

The attractive utilization route for one-step catalytic oxidation of dimethyl ether to dimethoxymethane was successfully carried out over the H3PW12O40（40%）/SiO2 catalyst, modified by Cs, K, Ni, and V. The Cs modification of H3PW12O40（40%）/SiO2 gave the most promising result of 20% dimethyl ether conversion and 34.8% dimethoxymethane selectivity. Dimethoxymethane could be synthe- sized via methoxy groups decomposed from dimethyl ether through the synergistic effect between the acid sites and the redox sites of Cs modified H3PW12O40（40%）/SiO2.     

非晶SiO2纳米灯笼的制备和表征

在1000 ℃用活性炭把二氧化锡粉末还原成单质锡, 锡作为催化剂, 硅片作为硅源同时作为收集衬底, 在硅片上制备出了非晶SiO2纳米灯笼. 灯笼的一端连在硅片上, 另一端为一个锡球, 中间是一些圆弧状的SiO2纳米线把两端相连. 纳米灯笼具有良好的对称性. 利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、选区电子衍射(SAED) 和HRTEM自带的能谱分析仪(EDS)对样品的表面形貌、微观结构和成分进行了分析研究. 结果表明, 灯笼中SiO2纳米线为非晶态, 结点是晶态锡, 结点表面覆盖一层非晶态的硅的氧化物. 结合实验条件对纳米灯笼的生长机理进行了讨论, 提出了纳米灯笼生长的一个模型.     

High-resolution electron microscopy of montmorillonite and montmorillonite/epoxy nanocomposites

With the use of high-resolution transmission electron microscopy the structure and morphology of montmorillonite (MMT), a material of current interest for use in polymer nanocomposites, was characterized. Using both imaging theory and experiment, the procedures needed to generate lattice images from MMT were established. These procedures involve careful control of the microscope's objective lens defocus to maximize contrast from features of a certain size, as well as limiting the total dose of electrons received by the sample. Direct images of the MMT lattice were obtained from neat Na+ MMT, organically modified MMT, and organically modified MMT/epoxy nanocomposites. The degree of crystallinity and turbostratic disorder were characterized using electron diffraction and high-resolution electron microscopy (HREM). Also, the extent of the MMT sheets to bend when processed into an epoxy matrix was directly visualized. A minimum radius of curvature tolerable for a single MMT sheet during bending deformation was estimated to be 15 nm, and from this value a critical failure strain of 0.033 was calculated. HREM can be used to improve the understanding of the structure of polymer nanocomposites at the nanometer-length scale.     

Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.     

Hierarchical Structure‐Within‐Structure Morphologies in A2‐star‐(B‐alt‐C) Molecules

We employ dissipative particle dynamics (DPD) to examine the self‐assembly behavior of A₂‐star‐(B‐alt‐C) molecules. We successfully observe various types of hierarchical structure‐within‐structures, such as A‐formed spheres in the matrix formed by B and C alternating layers, hexagonally packed A‐formed cylinders in the matrix with B and C segregated layers, B and C alternating layers‐within‐lamellae, coaxial B and C alternating domains within hexagonally packed BC‐formed cylinders in the A‐matrix, and co‐centric BC‐alternating domains within BC‐formed spheres in the A‐matrix, by increasing the A composition. Generally speaking, the small length‐scale B and C segregated domains are in parallel to the large length‐scale structures. This hierarchical periodicity along the same axis as well as the various characteristic structures, that the A₂‐star‐(B‐alt‐C) copolymers display, are quite different from those in A‐block‐(B‐graft‐C) coil‐comb copolymers. Moreover, it is interesting to find that when the copolymer chain length increases, though the hierarchical structure type is maintained, the number of small length‐scale lamellae that can form within the large length‐scale structure increases. These hierarchical structures under various compositions are reported theoretically for the first time in the copolymer systems consisting of the alternating blocks, and are in good agreement with the most recent experimental work by Matsushita and co‐workers (Macromolecules 2007 , 40, 4023).