Temperature variation of DC conductivity of poly(3-alkyl thiophenes) and their cocrystals

The dc conductivity of poly(3-alkyl thiophenes) (P3ATs) and their cocrystals are measured in the temperature range of -130 to 150 degrees C. Both solvent-cast films and the melt-cooled films are used. The former exhibit a sharp increase followed by a decrease in conductivity, whereas the latter show only a sigmoidal increase in conductivity with temperature. The sigmoidal increase of the melt-cooled samples is dependent on the regioregularity and alkyl chain length of the samples and is explained from the solid-state transformation of the interdigited type-II crystal to a noninterdigited type-I crystal. The type-I crystal itself has lower conductivity than type-II crystals, and the samples exhibit a blue shift in UV-vis absorption spectra with an increase in temperature. So the sigmoidal increase of conductivity is attributed to the increase in carrier mobility with temperature in the type-I crystals. The X-ray and DSC results suggest that during the transformation of type-II to type-I crystals with increasing temperature, localized crystallites of smaller dimensions separated by narrower amorphous portions are produced throughout the whole matrix. But in the type-II polymorph, the crystallites are large with a wider gap in between. The sigmoidal increase is attributed to the easier hopping of the charge carrier among the localized crystallites of the type-I crystal with increasing temperature. In the cocrystals, the smaller sigmoidal increase with increasing irregular sample concentration is valid for a lower concentration of such localized crystallites. The same is true for cocrystals with longer alkyl chain lengths. The interfibrillar contribution of conductivity through the network junctions together with the carrier hopping between the localized crystallites might be a possible reason for the metallic-type behavior of solvent-cast samples after a certain temperature. The melt-cooled films do not exhibit metallic-type behavior because of the absence of a fibrillar network morphology.     

Functional group dependent site specific fragmentation of molecules by low energy electrons

Functional group dependence is observed in the dissociative electron attachment (DEA) to various organic molecules in which the DEA features seen in the precursor molecules of the groups are retained in the bigger molecules. This functional group dependence is seen to lead to site-selective fragmentation of these molecules at the hydrogen sites. The results are explained in terms of the formation of core-excited Feshbach resonances. The results point to a simple way of controlling chemical reactions as well as interpreting the DEA data from bigger biological molecules.     

Multifunctional antigens of A. fumigatus and specific antibodies

The majority of Aspergillus-induced infections in man are caused by the pathogenic fungus A. fumigatus, which secretes biologically and immunologically active glycosylated and nonglycosylated proteins. The complexity in the antigenic structure of A. fumigatus and the varying host immune responses lead to a wide spectrum of clinical conditions such as allergic bronchopulmonary aspergillosis (ABPA), aspergilloma, and invasive aspergillosis. It is reported that 15-20% of allergic asthmatics suffer from Aspergillus-induced allergies. The incidence of opportunistic infections, including Aspergillus infections, has risen because of the increase in the incidence of HIV and tuberculosis. Allergic bronchopulmonary aspergillosis is an immunologically significant clinical form where type I and type III hypersensitivity reactions are involved in pathogenesis. High levels of specific IgE and IgG antibodies in these patients are of diagnostic value. Molecular characterization of certain immunodominant allergens and antigens of A. fumigatus revealed the presence of complex carbohydrate moieties, heat-shock proteins, enzyme activities such as elastase, protease, catalase, dismutase, and cytotoxic ribonuclease. A Con A binding allergen/antigen (45 kDa) and Con A nonbinding allergen/antigen (18 kDa, Asp fI) have a multifunctional nature. The multifunctional nature of these antigens may play an important role in the pathogenesis of the disease. Significant amounts of a major allergen/antigen of molecular weight 18 kDa is excreted in large amounts through the urine of patients with invasive aspergillosis. Studies on the structure-function relationship of the 18-kDa allergen/antigen revealed the involvement of tryptophan residues in binding with monoclonal antibodies (MAbs). Also, the histidine residues and cysteine disulfide bonds of the 18-kDa allergen are involved in its catalytic activity. The high load of multifunctional antigens in the serum of patients for prolonged periods, the presence of high levels of specific antibodies, and the absence of protective antibodies in ABPA patients have necessitated studies on the functional properties of the antibodies. The present study shows significant immunoreactivity of antibodies in patients of ABPA to fibronectin and collagen. Analysis of IgG antibodies from the patients of ABPA showed the presence of DNA-cleaving activity. These observations offer a new line of thinking in understanding the mechanism of pathogenesis of Aspergillus-induced clinical manifestations, and may lead to novel approaches to intervention in the inflammation and infection caused by fungal pathogens.     

Heteroannulation through copper catalysis: a novel cyclization leading to a highly regio- and stereoselective synthesis of 2-substituted benzothiazolines

[reaction: see text] 3-(2-Aminophenylthio)prop-1-yne 8 reacted with aryl iodides 9-18 under palladium-copper catalysis leading to the disubstituted alkynes 19-28 which after tosylation underwent a novel cyclization under copper catalysis to 2-substituted benzothiazolines 29-38. The expected 3-(arylidine)-2,3-dihydrobenzothiazines were not obtained.     

Magnetic behavior of Dy3+ Ion in Dy2(SeO4)3 · 8H2O. Experimental and theoretical study including the effects of J-J mixing

Single crystals of dysprosium selenate octahydrate were grown and magnetic measurements carried out on the principal anisotropies and the principal susceptibility χ₁ at room temperature and their thermal variation down to 90 K. The magnetic moment is found to be slightly lower than the free-ion value, although the anisotropy is quite high. The variation of the average moment with temperature is very small and a least squares fit to a Curie-Weiss law yielded ?0.97 K as the paramagnetic Curie temperature. An analysis of the data was undertaken on the basis of interaction of the rare earth ion with its immediate neighbors. A crystal field (CF) of tetragonal symmetry which is the approximate site symmetry of the RE³⁺ ion, gave an excellent simulation of the observed behavior. Considerable effects of J-J mixing of the first three J-multiplets with the ground one were noticed. g-factors and the Schottky anomalies in the heat capacity were determined theoretically. Various hyperfine properties, including the thermal variation of the Mössbauer spectra, were computed for both isotopes of dysprosium in the light of the proposed CF.     

Studies on the polymerization of ethyl acrylate. I. Kinetic studies

Kinetic studies on the polymerization of ethyl acrylate have been carried out and the various rate constants and their corresponding activation energies determined.     

Domino carbocationic cyclization of functionalized cyclopropyl ketones: facile one-pot access to peri- and angularly fused polycyclic aromatic and heteroaromatic frameworks

Conjugate adducts obtained by base-induced 1,4-addition-elimination of various aryl/heteroaryl acetonitriles with 1-(2-arylcyclopropyl)-3,3-(bismethylthio)-2-propen-1-ones have been shown to undergo facile acid-induced domino carbocationic rearrangement yielding a variety of substituted tricyclic aromatic and heteroaromatic frameworks in high yields in a one-pot operation. The methodology provides efficient, high-yield routes for synthesis of novel substituted dihydrophenalenes, dihydrobenzo[d,e]anthracene, cyclopenta[a]naphthalene, and fused heteroaromatics such as substituted 4,5-dihydrobenzo[c,d]indole, dihydronaphtho[1,8-b,c]thiophene, dihydroindeno[5,4-b]- and -[4,5-b]-thiophenes, cyclopenta[a]carbazole, and dihydrocyclopenta[e]indazol-3-one derivatives. The probable mechanism of this interesting domino process appears to involve stepwise or concomitant acid-induced ring opening and intramolecular cyclocondensation of cyclopropyl ketones to give benzo-fused arene (or heteroarene) intermediates bearing a reactive benzylic carbocation that is captured intramolecularly either by a preexisting aromatic (or heteroaromatic) ring or by a newly formed benzene ring to give either peri-fused or angularly fused products, respectively. Thus, the overall domino process entails formation of two C-C bonds, a substituted benzene ring along with a peri-fused cyclohexane or angularly fused cyclopentane ring in a single operation.     

Selectfluor-mediated mild oxidative halogenation and thiocyanation of 1-aryl-allenes with TMSX (X = Cl,Br, I,NCS) and NH4SCN

Presence of TMSX (X = Cl, Br, I) unleashes the oxidative character of Selectfluor and provides a mild dihalogenation method for 1-arylallenes. Preference for 2,3-addition was observed with TMSCl in MeCN irrespective of the nature of the substituent on the aryl moiety, whereas 1,2-addition was preferred in [BMIM][BF₄]. With TMSBr and TMSI only products corresponding to 2,3-addition were observed. Reactions carried out with TMSBr in IL solvents gave the corresponding monobromoalkenes as a major product along with the isomeric dibromo-alkenes. Reaction with NH₄SCN provided convenient access to dithiocyanate derivatives. The same products were formed via TMS-NCS/Selectfluor. Formation of common products via TMSNCS and NH₄SCN points to the formation and interplay of SCN⁺/NCS⁺ as incipient electrophiles.     

2-Aminopyridine derivative as fluorescence ‘On–Off’ molecular switch for selective detection of Fe3+/Hg2+

2-Amino-6-methyl-4-phenyl-nicotinonitrile 1, a 2-aminopyridine-based fluorescent compound, was found to be a fluorescent chemosensor for the detection of Fe³⁺ and Hg²⁺ ions over a number of other metal ions. Compound 1 was synthesized in one step using a multicomponent reaction, and characterized using common spectroscopic tools. During Fe³⁺/Hg²⁺ sensing the compound 1 followed a ‘switch-off’ mechanism. Further, compound 1 could sense Fe³⁺ over Hg²⁺ by its distinct absorption and fluorescence quenching behaviors. 1:1 complex formation of 1 with Fe³⁺ and Hg²⁺ was clearly understood from Job’s plot. The present work brings additional evidence on the importance of multicomponent reactions which could lead to the development of fluorescence chemosensor in one step for the selective detection of biologically important metal ions.     

Vinyl polymerization with Fe(III)-thiourea as initiator system. Part I. General features and kinetics of Fe(ClO4)3-thiourea reaction

Initiation of polymerization of methyl methacrylate, styrene, and acrylonitrile with the redox system Fe(III)—thiourea has been examined. For the heterophase polymerization any of the ferric salts, such as FeCl₃, Fe₂(SO₄)₃, and Fe(ClO₄)₃ can be used as oxidant, but there is no polymerization in the homogeneous phase when FeCl₃ is used as oxidant. It was also observed that Fe(ClO₄)₃ retards the radical polymerization of styrene, though this salt has hardly any effect on the radical polymerization of methyl methacrylate. Further, the reaction between Fe(ClO₄)₃ and thiourea was found to be kinetically of second order. The rate is largely influenced by the nature of the solvent. It is concluded that apart from the dielectric constant of the solvents, specific effects like complex formation of Fe(III) with solvents should have a marked influence on the rate of this reaction.